Home › Cost Guides › Rainwater Harvesting System Installation
Cost Guide

How Much Does a Rainwater Harvesting System Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$2,000 – $12,000
Most homeowners pay around $4,000 · $4,000 is Angi's published national average cost to install a cistern (updated Oct 30, 2026) — NOT a derived midpoint. A mid-range above-ground cistern system (dry, about 1,000–2,500 gallons, irrigation plus indoor non-potable use) is $2,000–$12,000 on HomeGuide's and EngineerFix's published scales. At $1.50–$7.00 per gallon of storage (HomeGuide), a 1,000-gallon system is $1,500–$7,000, which brackets the $4,000 average.
typical
$2,000$12,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
A wooden rain barrel with metal bands under a downspout beside a white shed

Rainwater Harvesting System Installation cost at a glance

  • Typical range: $2,000 – $12,000
  • Most homeowners pay: around $4,000
  • Prices vary most by: Installation labour (30–50% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi, 'Rainwater Collection Systems: What's the Cost of a Cistern?', updated Oct 30, 2026 (national average to install a cistern $4,000; most $3,000–$5,000; full installed range $3,000–$21,000; above-ground cistern $1,500–$4,500, underground $5,000+; tanks under 200 gal $120–$600, above 5,000 gal $3,000–$21,000; 5,000-gal tank by material polyethylene $3,000, fiberglass $3,500, steel $4,500, concrete $4,500; gutter installation averages $1,030; filtration upkeep ~$740/year, UV bulb $250/year; price bands under $500 barrels/small cisterns, $501–$2,500 larger barrels/small cisterns, $2,500–$12,000 above-ground cisterns with irrigation integration, $12,000+ high-end underground to $22,000 — its Colorado 'illegal' wording is pre-2016 and OUTDATED, and its '110 gallons in every other state' FAQ claim is WRONG (110 gal is Colorado's limit); neither claim is printed), HomeGuide, 'How Much Does It Cost to Install a Rainwater Harvesting System? (2026)', updated Feb 4, 2026 (rain barrel system $200–$2,500 installed; above-ground cistern $2,000–$12,000, underground $6,500–$24,000+; by type barrel $200–$2,500, wet $5,000–$28,500+, dry $2,000–$10,000; rooftop harvesting $200–$28,500, surface runoff $8,000–$30,000+; $1.50–$7.00 per gallon of storage; tank unit up to 5,000 gal $800–$12,000; conveyance $750–$2,300; pre-storage filtration $30–$300, post-storage $350–$2,400; pump $100–$800 unit / $150–$1,200 installed; labour $200–$2,400; piping $1,200–$8,000; excavation $1,000–$5,000, trenching $500–$1,200, regrading $500–$5,000; plumber $45–$150/hr; maintenance $750–$1,000+/year; pump replacement $100–$800, most pumps need repair/replacement after 3–5 years; roof $5,700–$16,000 excluded from system totals), EngineerFix, 'How Much Does a Rainwater Collection System Cost?' and 'How Much Does a Cistern System Cost?' (no visible dates; medium above-ground cistern system $2,000–$12,000; barrel setup $80–$2,500; large whole-house potable system commonly $6,500 to $28,500+; 5,000-gal polyethylene tank $2,000–$4,000; first-flush diverter $45–$388; advanced filtration $1,130–$3,540; labour 30–50% of total; plumbers $45–$150/hr, landscapers $50–$100/hr; complex pro install $2,500–$15,000; permits $50–$500 / $100–$1,000; maintenance $750–$1,000/year filtered cistern, $100–$500/year simple system; UV bulb ~$250/year; tank cleaning $400–$800; simple above-ground pro install $1,500–$4,500, complex underground $6,500–$24,000+; excavation $2,000–$5,000; ROI/payback 5–15 years — soft, not printed as fact), GreenLifeZen, 'Breaking Down Residential Rainwater Harvesting Costs in 2026', Sep 1, 2026 (complete mid-sized residential system $4,200–$16,000; tanks $500–$5,000, gutters & downspout mods $1,000–$3,000, labour $2,000–$5,000, permits $200–$500, pumps & filtration $500–$2,500; maintenance $100–$300/year DIY basic; pump replacement $300–$500 every 7–10 years; 1 inch of rain on a 1,000 sq ft roof ~600 gallons; tank lifespan 20–30 years poly/fiberglass; rebates ~$1.00/gal up to $2,000 in some cities; '20% ROI over 20 years' from one California study — soft, not printed) and Elevate Home, 'Rainwater Harvesting for Homes: 2026 Guide' (simple irrigation setup $3,000–$8,000; mid-range buried system $8,000–$18,000; whole-house system $15,000–$25,000; potable treatment add-on $3,000–$8,000; permits/engineering/testing $1,000–$3,000 on the complex end; above-ground poly tank $800–$3,000, buried cistern $4,000–$12,000+ installed; potable treatment train first-flush + 5-micron then 1-micron filtration + carbon + UV + chlorination; quarterly water testing $100–$300 per panel; Texas sales-tax exemption and HOA prohibition ban; Colorado legalized 2016 with limits; rebates $500–$3,000 common; no federal tax credit for rainwater harvesting; payback at $8–$15 per 1,000 gal, offsetting 30,000 irrigation gal/year saves $240–$450/year — 'a long payback on a $10,000 system'), with HomeServe (quoting 2022 Fixr data, cross-check only: dry $1,000–$5,000, wet $8,000–$15,000; Colorado 110-gal limit since 2016, Utah 2,500-gal max + permit). Synthesized typical = the HomeGuide–EngineerFix agreement at $2,000–$12,000, with $4,000 most-pay at Angi's published national average. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Rainwater Harvesting System Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — rain barrel system$200 – $2,5001–4 barrels (50–200 gallons each) at the downspouts, first-flush diverter, hose-bib delivery, garden watering only. DIY-friendly; no pump, no indoor plumbing. (HomeGuide rain barrel system band; EngineerFix $80–$2,500.) NOTE: barrels alone are the budget tier because barrels are a real, priced system type — but barrels alone are NOT the headline job of this page. The headline job is the cistern system in the Standard tier.
Standard — mid-range above-ground cistern, dry$2,000 – $12,000The band most homes land in: ~1,000–2,500 gallon polyethylene cistern near the house, first-flush diverter, pre-storage filtration, pump + pressure delivery, basic filtration, irrigation + indoor non-potable plumbing (toilets, laundry). The $4,000 published average sits inside it. (HomeGuide above-ground cistern $2,000–$12,000 AND EngineerFix medium system $2,000–$12,000 agree exactly.)
Premium — underground (buried) cistern system$6,500 – $24,000+2,500–10,000 gallon buried tank, excavation, pump + pressure tank, filtration, irrigation-zone and indoor non-potable integration. (HomeGuide underground $6,500–$24,000+ AND EngineerFix complex underground $6,500–$24,000+ agree exactly; Elevate mid-range buried $8,000–$18,000 and whole-house $15,000–$25,000 sit inside the top of this band.) Premium alternative, same tier, potable use: whole-house potable system $6,500–$28,500+ (EngineerFix) — underground cistern + advanced treatment (multi-stage filtration + UV + chlorination) + water testing. Potable treatment train alone $3,000–$8,000 (Elevate) / indoor-use filtration $4,000–$12,000 (HomeGuide).

Where the money goes

Part of the jobShareNote
Storage tank / cistern (unit, up to 5,000 gal)No published share$800–$12,000 (HomeGuide). By material, up to 5,000 gal, NOT including installation: polyethylene $800–$6,000; concrete $1,100–$6,800; fiberglass $5,000–$9,000; steel $2,000–$12,000 (HomeGuide; EngineerFix agrees).
Gutters + downspout modificationsNo published share$750–$2,300 installed (HomeGuide conveyance and installation lines agree). GreenLifeZen $1,000–$3,000 for full gutter replacement with leaf guards; gutter guards alone add $500–$1,500. Angi's gutter installation average is $1,030.
PumpNo published share$100–$800 per unit (HomeGuide) / $150–$1,200 installed per pump (HomeGuide). EngineerFix: replacement pump $100–$800 before labour.
Pre-storage filtration (first-flush diverter, screens)No published share$30–$300 (HomeGuide). EngineerFix: first-flush diverter $45–$388, simple downspout model to advanced in-ground unit.
Post-storage filtration & disinfectionNo published share$350–$2,400 (HomeGuide). Advanced filtration $1,130–$3,540 (EngineerFix). Indoor-use filtration $4,000–$12,000 (HomeGuide); potable treatment train $3,000–$8,000 (Elevate) — premium add-ons, never the standard spec.
Piping / plumbingNo published sharePiping installation $1,200–$8,000; underground piping $8–$15 per linear foot; water pipes $100–$8,000 (HomeGuide). Plumber $45–$150 per hour (HomeGuide and EngineerFix agree).
Installation labour30–50% of total$200–$2,400 (HomeGuide breakdown table). GreenLifeZen's labour $2,000–$5,000 covers a broader scope (excavation, plumbing, electrical, testing); EngineerFix's $2,500–$15,000 is a full professional install of large, complex systems with indoor-plumbing connections. Labour is roughly 30–50% of the total project cost (EngineerFix) — the only published share on this page.
Excavation (buried tanks only)No published share$1,000–$5,000 (HomeGuide) / $2,000–$5,000 (EngineerFix). Trenching $500–$1,200; lawn regrading $500–$5,000 (HomeGuide).
Permits and inspectionsNo published share$50–$1,000 — EngineerFix $50–$500 on its rainwater page and $100–$1,000 on its cistern page; GreenLifeZen $200–$500. Elevate's $1,000–$3,000 is permits + engineering + testing on the complex (potable) end, not a permits-only figure.
Running costs (not install cost)No published shareRoutine filtered-cistern maintenance $750–$1,000+ per year (HomeGuide and EngineerFix agree); simpler systems $100–$500 per year (EngineerFix) or $100–$300 per year DIY basic (GreenLifeZen). UV bulb ~$250 per year (Angi and EngineerFix agree); pump replacement $100–$800 before labour; professional tank cleaning $400–$800 (EngineerFix).
Estimator’s note: on a rainwater harvesting system installation, installation labour is usually where quotes swing most (30–50% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Large storage tanks beside a farmhouse — capacity is the first price driver. At $1.50–$7.00 per gallon of storage (HomeGuide), a 1,000-gallon system is $1,500–$7,000, which brackets Angi's $4,000 national average.
Large storage tanks beside a farmhouse — capacity is the first price driver. At $1.50–$7.00 per gallon of storage (HomeGuide), a 1,000-gallon system is $1,500–$7,000, which brackets Angi's $4,000 national average.

What moves the price most

Worked example — illustrative arithmetic from published bands (not a published quote): mid-range above-ground cistern system, ~1,000–1,500 gal poly tank, dry system, irrigation + indoor non-potable use: tank $1,500 + gutters/downspout mods $1,000 + pump (installed) $400 + first-flush diverter + pre-storage filtration $150 + installation labour $700 + permits $250 = $4,000. Each line is picked INSIDE its published band (tank: HomeGuide poly $800–$6,000; gutters: HomeGuide $750–$2,300; pump: HomeGuide $150–$1,200 installed; first-flush: HomeGuide $30–$300; labour: HomeGuide $200–$2,400; permits: EngineerFix $50–$500); the arithmetic lands EXACTLY on Angi's published $4,000 national average, which is why the example is credible. A wet system, buried tank or potable treatment would cost more — see the system types below. Do NOT present the $4,000 as a quote — it is a worked illustration. Cost by system type (published totals — do not blend): rain barrel system, above ground, 50–200 gal: $200–$2,500 installed (HomeGuide) — the Budget tier; above-ground cistern, DRY (water funnels from gutters directly into the cistern top): $2,000–$10,000 (HomeGuide) — the Standard spec's core (simple above-ground pro install $1,500–$4,500, EngineerFix and Angi agree); above-ground cistern, WET (water flows through underground piping and back up into a cistern away from the roof): $5,000–$28,500+ (HomeGuide; Fixr-via-HomeServe wet $8,000–$15,000); underground cistern (buried tank): $6,500–$24,000+ (HomeGuide AND EngineerFix agree exactly; Angi: underground $5,000+, high-end underground $12,000–$22,000); whole-house POTABLE system: commonly $6,500–$28,500+ (EngineerFix; Elevate whole-house $15,000–$25,000 + $3,000–$8,000 potable treatment). Rooftop harvesting, ALL types combined: $200–$28,500 (HomeGuide) — this band spans barrels to whole-house potable and is NEVER printed as the typical range for one job. Cistern, overall (Angi): $3,000–$21,000 installed; average $4,000; most pay $3,000–$5,000. Mid-sized complete residential system (GreenLifeZen): $4,200–$16,000. By tank size (Angi): under 200 gal $120–$600; above 5,000 gal $3,000–$21,000. Where sources disagree: the real split is SCOPE, not error — HomeGuide's rooftop band is $200–$28,500 (barrels at the bottom, whole-house potable at the top); Angi's cistern band is $3,000–$21,000; EngineerFix's medium band is $2,000–$12,000; GreenLifeZen's mid-sized complete system is $4,200–$16,000; Elevate's simple irrigation is $3,000–$8,000 and its whole-house is $15,000–$25,000. These are NOT competing estimates of the same job — they describe different system sizes and uses. The page publishes $2,000–$12,000 as typical for its standard spec and carries the other bands as separate system types — never blend them into a single $200–$28,500 band. Labour: HomeGuide $200–$2,400 (install-labour component line) vs GreenLifeZen $2,000–$5,000 (labour incl. excavation, plumbing, electrical, testing) vs EngineerFix $2,500–$15,000 (full pro install of complex systems with indoor-plumbing connections) — scope again; publish HomeGuide's line as the component and name the complex-install range separately. Permits: EngineerFix $50–$500 vs $100–$1,000 (its own two pages) vs GreenLifeZen $200–$500 — publish $50–$1,000 with the spread named. Maintenance is a DIRECT SCOPE SPLIT: GreenLifeZen $100–$300 per year (DIY basic labour, simple system) vs HomeGuide $750–$1,000+ per year AND EngineerFix $750–$1,000 per year (filtered cistern systems with bi-annual inspections, roof washing, filter cleaning) — both are right for their system type; the page prints both with the system-type qualifier, never a single maintenance figure. Pump life: HomeGuide says most pumps need repairing/replacing after 3–5 years; GreenLifeZen says pump replacement every 7–10 years ($300–$500) — do not resolve; print 'typically 3–10 years depending on use and pump type' or name both figures. Legality — Angi's page is OUTDATED: it still says collecting rainwater in Colorado is 'actually illegal for most homeowners'. Colorado legalized residential collection in 2016, with a 110-gallon household limit (HomeServe; Elevate) — print the 2016 legalization + 110-gallon limit; NEVER print Angi's 'illegal' line. Angi's FAQ claim that 'homeowners can collect up to 110 gallons of rainwater in every other state' is WRONG — 110 gallons is Colorado's limit, not a national rule. Rainwater harvesting is legal in most U.S. states, and many encourage it with rebates or tax credits (HomeServe; HomeGuide). Utah caps storage at 2,500 gallons and requires a permit (HomeServe). Texas exempts rainwater equipment from sales tax and bars HOAs from prohibiting it (Elevate). Always check your state and local rules before building — permits are usually required for anything beyond rain barrels (HomeGuide; Elevate). What moves the price: storage capacity (gallons) first, then system type (barrel / dry cistern / wet cistern / underground cistern), then tank material, then whether the tank is buried (excavation $1,000–$5,000), then pump + pressure delivery, filtration level, and indoor plumbing integration. Sizing fact: 1 inch of rain on a 1,000 sq ft roof yields roughly 600 collectible gallons (GreenLifeZen; Elevate). Tank lifespan: high-quality polyethylene or fiberglass tank lasts 20–30 years (GreenLifeZen, sole source). A tank ALONE is not a system — only the complete system (catchment + conveyance + first-flush + storage + pump + filtration) counts. Scope — what this page is not: a greywater system (used household water reused for irrigation — a different water source, a separate live page; the live greywater page explicitly excludes rainwater harvesting); gutters alone (conveyance, $750–$2,300 as a component line here — standalone gutter job on the live gutter page); water filtration alone (a component: $30–$300 pre-storage, $350–$2,400 post-storage — standalone filtration job on the live filtration page); a roof replacement (the roof is the catchment surface, but a new roof at $5,700–$16,000, HomeGuide, is NOT part of a harvesting system price — never add roof cost into the system total; roof material matters for water quality: metal/tile/slate are best, asphalt shingles shed granules and need more filtration, wood shakes should be irrigation-only — Elevate); surface runoff harvesting ($8,000–$30,000+, HomeGuide — a landscaping method of berms, swales and French drains, not a rooftop system, note only); potable treatment as standard (a $3,000–$8,000 premium add-on, Elevate); well drilling (a different water source — Angi quotes $15–$60 per linear foot as a comparison only); or rebates as a price reduction (rebates $500–$3,000 common, Elevate; ~$1.00 per gallon of storage up to $2,000 in some cities, GreenLifeZen — incentives vary by locality and need pre-approval, never subtract them from the published totals). ROI / payback: no single figure is printed — GreenLifeZen cites a California study at '20% ROI over 20 years', EngineerFix says payback 5–15 years, and Elevate's own math shows $240–$450 per year saved on a $10,000 system ('a long payback'). Say payback depends entirely on local water rates and rainfall. Methodology: figures cross-checked across four independent data families — Angi Inc. (Angi + HomeGuide), EngineerFix, GreenLifeZen and Elevate Home — with HomeServe (quoting 2022 Fixr data) as a cross-check only; where sources disagree, the page publishes the honest overlap band and names the disagreement. Related costs: greywater system installation, gutter installation, water filtration installation, sprinkler system installation, well pump installation, sump pump installation, water softener installation and French drain installation.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A barrel catching water under a downspout — the first-flush diverter keeps the first, dirtiest roof water out of the tank. Pre-storage filtration runs $30–$300 (HomeGuide); a first-flush diverter alone is $45–$388 (EngineerFix).
A barrel catching water under a downspout — the first-flush diverter keeps the first, dirtiest roof water out of the tank. Pre-storage filtration runs $30–$300 (HomeGuide); a first-flush diverter alone is $45–$388 (EngineerFix).

Frequently asked questions

How much does a rainwater harvesting system cost?

$2,000–$12,000 for most homeowners for a mid-range above-ground cistern system, with a national average of $4,000 (Angi, updated Oct 2026). A rain barrel system is $200–$2,500 (HomeGuide); an underground cistern system is $6,500–$24,000+ (HomeGuide and EngineerFix agree); a whole-house potable system runs $6,500–$28,500+ (EngineerFix). The price depends on storage size, system type, tank material, and whether the tank is buried.

Is rainwater harvesting legal in my state?

Rainwater harvesting is legal in most U.S. states, and many encourage it with rebates or tax credits (HomeServe; HomeGuide). The exceptions are a few Western states with prior-appropriation water law: Colorado legalized residential collection in 2016 with a 110-gallon household limit (HomeServe; Elevate), and Utah caps storage at 2,500 gallons and requires a permit (HomeServe). Texas exempts rainwater equipment from sales tax and bars HOAs from prohibiting it (Elevate). Always check your state and local rules before building — permits are usually required for anything beyond rain barrels (HomeGuide; Elevate).

Is a rain barrel or a cistern better for rainwater collection?

A barrel is better for small-scale, low-cost collection: barrels hold 50–200 gallons, cost $80–$1,700 for the unit (HomeGuide), and suit garden watering only. A cistern is a rain barrel on a larger scale — 1,000–6,000+ gallons (Angi), up to 20,000 gallons (HomeGuide) — and can supply irrigation plus indoor non-potable uses like toilet flushing and laundry with a pump and filtration (EngineerFix). Barrels are DIY-friendly; cisterns need professional installation (HomeGuide).

How much does a rainwater harvesting system cost per gallon of storage?

$1.50–$7.00 per gallon of storage (HomeGuide). Small systems for outdoor watering are at the low end; underground, wet and indoor-plumbing systems cost the most per gallon. As a check: a 1,000-gallon system at that rate is $1,500–$7,000, which brackets Angi's $4,000 national average. Storage size is driven by roof area and rainfall — 1 inch of rain on a 1,000 sq ft roof yields roughly 600 collectible gallons (GreenLifeZen; Elevate).

Can I drink the rainwater from my system?

Only with potable-grade treatment — and that is a premium add-on, not the standard system. It needs first-flush diversion, multi-stage filtration down to 1 micron, activated carbon, and disinfection by UV plus chlorination (Elevate), costing $3,000–$8,000 for the treatment train (Elevate) or $4,000–$12,000 for indoor-use filtration (HomeGuide), plus quarterly water testing at $100–$300 per panel until the system proves stable, then annual testing (Elevate). Most jurisdictions require permits and health-department approval for potable use (Elevate). For irrigation and indoor non-potable use, basic filtration is enough (HomeGuide).

How much maintenance does a rainwater harvesting system need?

It depends on the system. A filtered cistern system costs $750–$1,000+ per year for routine maintenance — bi-annual inspections, roof washing and filter cleaning (HomeGuide; EngineerFix agree) — plus a UV bulb at ~$250/year (Angi; EngineerFix) and a professional tank cleaning at $400–$800 (EngineerFix). A simple non-pressurised system costs $100–$500/year (EngineerFix) or $100–$300/year if you do the basic labour yourself (GreenLifeZen). Check and clean filters quarterly, clean gutters at least twice a year, and flush the tank and remove sediment about every 3 years (HomeGuide). Pumps typically need repair or replacement after 3–5 years (HomeGuide) to 7–10 years (GreenLifeZen) depending on use.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Rainwater Harvesting System Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

A bright living room with a white mantel and a built-in fireplace with a glowing fire below a wall-mounted TV

Electric Fireplace Installation Cost

$200 – $3,000

$1,000 is Angi's published electric average (updated Sep 14, 2026) — NOT a derived midpoint. HomeGuide's published electric band is $200–$3,000, unit + installation (updated Jan 27, 2026). A plug-in freestanding unit at $200–$500 needs no pro; a recessed built-in at $1,500–$3,000+ is a small construction job. EngineerFix's $1,200–$3,400 band is the standard professionally installed INSERT scope, not the whole market.

Red fire sprinkler riser pipes labelled SPRINKLER by zone, with pressure gauges and control valves, on the outside wall of a building

Fire Sprinkler System Installation Cost

$3,000 – $6,000

$4,500 is a DERIVED midpoint — NOT a published average: no source publishes a single national-average total for a whole-house residential system. It is 2,000 sq ft x $2.25 per sq ft, the midpoint of the $1.50–$3.00 per sq ft new-construction overlap (HomeServe, Angi, Total Fire Protection). Most new-build homes pay $3,000–$6,000; retrofitting an existing home costs $2.00–$7.00 per sq ft, about $4,000–$14,000 for the same size home. Angi's $766 'average' is NOT printed anywhere on this page — it contradicts Angi's own per-sq-ft figures and can only reflect partial or small jobs in its sample. This page covers INDOOR fire sprinklers (NFPA 13D). For lawn irrigation sprinklers, see our lawn sprinkler guide.

An open wooden roof window seen from inside a dark attic, the sloped surfaces around it lined with dark foil-faced reflective insulation

Radiant Barrier Installation Cost

$710 – $2,840

$1,700 is Angi's published national average (updated Oct 14, 2026) — NOT a derived midpoint. Professional installation runs $710–$2,840 (Angi); per square foot $0.10–$1.00 installed for foil. A barrier reflects radiant heat — it adds no R-value and does not replace insulation; it complements adequate insulation. A 1,500 sq ft attic runs about $1,050–$3,000 installed (Angi).

Technician servicing an outdoor air conditioning unit with manifold gauges and hand tools

HVAC Replacement Cost

$5,000 – $12,500

Typical full furnace and central AC change-out using existing ductwork in good condition

Technician servicing a wall-mounted tankless water heater with its cover open

Water Heater Replacement Cost

$900 – $1,900

Typical like-for-like replacement of a standard 40–50 gallon tank water heater, installed

Solar panels on tiled roofs with brick chimneys

Solar Water Heater Installation Cost

$3,000 – $6,000

A solar water heater installation typically costs $3,000 – $6,000 for a standard active system for a family home, with about $3,700 the figure most jobs land near — Angi averages $3,700 in its guide and $1,780–$5,722 across 2026 projects, while HomeGuide averages $6,000 inside its $3,000–$9,000 installed band. The guides agree on the band and differ on the average because they weight system sizes differently; passive systems sit below this band and large evacuated-tube systems above it.