Home › Cost Guides › Electric Fireplace Installation
Cost Guide

How Much Does an Electric Fireplace Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$200 – $3,000
Most homeowners pay around $1,000 · $1,000 is Angi's published electric average (updated Sep 14, 2026) — NOT a derived midpoint. HomeGuide's published electric band is $200–$3,000, unit + installation (updated Jan 27, 2026). A plug-in freestanding unit at $200–$500 needs no pro; a recessed built-in at $1,500–$3,000+ is a small construction job. EngineerFix's $1,200–$3,400 band is the standard professionally installed INSERT scope, not the whole market.
typical
$200$3,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
A bright living room with a white mantel and a built-in fireplace with a glowing fire below a wall-mounted TV

Electric Fireplace Installation cost at a glance

  • Typical range: $200 – $3,000
  • Most homeowners pay: around $1,000

Cross-checked against three published sources for this project. Sources used for this page: HomeGuide, 'How Much Does a Fireplace Cost to Install or Build? (2026)', updated Jan 27, 2026 (electric fireplace, unit + installation $200–$3,000+; by type freestanding unit $200–$1,500 unit only, insert $200–$2,000, wall-mounted installed $500–$2,500+, recessed built-in installed $1,500–$3,000+; prefab body and grate $100–$2,500; named models Hampton Bay 23-inch Compact $100, XtremepowerUS 28.5-inch Embedded Insert $120, NAPOLEON 60-inch Wall-Mount Linear $1,300, NAPOLEON Allure 100-inch Wall-Mount $2,200; new circuit $250–$900, new outlet $150–$350, new switch $100–$300, additional wiring $5–$17 per linear foot, wiring typical $150–$200; handyman $50–$80/hr, minimum $75–$200; assembly & customization $350–$3,000 (all types); running cost $0.15/hr at 1,500 watts; electric = lowest upfront cost and lowest price to run per hour; no chimney or hearth needed — its $300–$3,000 / most $2,100 labour band is ALL fireplace types, never printed as electric labour), Angi, 'How Much Does Fireplace Installation Cost? [2026 Data]', updated Sep 14, 2026 (electric average around $1,000; labour $225 for an electric fireplace insert, the lowest of any fireplace type; wiring $150–$200 for a typical project; installations typically 1–3 days; electric lifespan up to 20 years; electric inserts need no ventilation — its $2,509 / most $940–$4,218 national average is ALL fireplace types, never printed as an electric figure) and EngineerFix, 'How Much Does an Electric Fireplace Insert Cost?' (no visible date; log set $80–$430; standard insert $300–$800, up to $1,700 large; premium/large-format linear inserts from ~$1,000, easily exceeding $2,000; plug-and-play needs zero professional labour; electrician $50–$100/hr, dedicated circuit + hardwired connection $150–$360 labour alone; total project cost for a standard professionally installed electric insert $1,200–$3,400; standard insert 4,500–5,000 BTUs, warms up to 400 sq ft) plus EngineerFix, 'How Much Does It Cost to Replace a Gas Fireplace With an Electric One?' (same family, conversion-only lines: electric inserts $800–$1,000; wall-mounted/built-in premium past $2,000, custom potentially exceeding $10,000; old gas unit removal $600–$2,500; cap gas line $75–$150, full line removal ~$250; new dedicated 15- or 20-amp circuit incl. permits and inspection ~$700 average, $570–$1,000; seal/cap chimney or flue $150–$650; wiring materials $100–$150; running cost $0.15–$0.18/hr; eliminates annual gas inspections and chimney cleaning ~$100/year). Synthesized typical = HomeGuide's published electric band at $200–$3,000, with $1,000 most-pay at Angi's published electric average. No % share, permits line, trim-kit line or per-sq-ft figure is published in any source read, so none is printed. Fixr's $750 average is not printed. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Electric Fireplace Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — plug-in freestanding unit or log set$200 – $500A plug-in freestanding unit or an electric log set, plugged into an existing outlet, with no professional labour at all. The unit is the whole job — slide it in, plug it in. (HomeGuide freestanding $200–$1,500 unit only; EngineerFix log set $80–$430.) NOTE: a $200–$500 plug-in is NOT a built-in fireplace.
Standard — wall-mounted unit or insert, pro installed$500 – $2,500A wall-mounted unit or an insert fitted into an existing firebox, professionally installed, with a new outlet or dedicated circuit as needed. The band most installed electric fireplaces land in; the $1,000 published average sits inside it. (HomeGuide wall-mounted $500–$2,500+, insert $200–$2,000; EngineerFix's standard installed insert $1,200–$3,400 overlaps the top of this tier.)
Premium — recessed built-in or large-format linear$1,500 – $3,000+A recessed / built-in unit with framing, drywall and finishing, or a large-format linear premium insert. (HomeGuide recessed $1,500–$3,000+; EngineerFix premium linear from ~$1,000, easily exceeding $2,000.) Custom built-ins run past $2,000 and can exceed $10,000 (EngineerFix) — the '+' on this tier. NOTE: Standard and Premium overlap ($1,500–$2,500) because HomeGuide's own per-type bands overlap. The tiers are by TYPE, not by a clean price ladder — that is the published data, not an error.

Where the money goes

Part of the jobShareNote
Unit, by type (prefab body and grate)No published share$100–$2,500 (HomeGuide). Named models, unit only: Hampton Bay 23-inch Compact $100; XtremepowerUS 28.5-inch Embedded Insert $120; NAPOLEON 60-inch Wall-Mount Linear $1,300; NAPOLEON Allure 100-inch Wall-Mount $2,200.
New dedicated circuitNo published share$250–$900 (HomeGuide, all-in circuit job). EngineerFix's conversion-scope circuit — ~$700 average including permits and inspection, range $570–$1,000 — is a different scope; carry it as a note, never as the headline circuit price.
New outletNo published share$150–$350 (HomeGuide).
Wiring (typical project)No published share$150–$200 (Angi; HomeGuide same band). Additional wiring $5–$17 per linear foot (HomeGuide).
Electrician labour (circuit + hardwired connection)No published share$150–$360 (EngineerFix, several hours at $50–$100 per hour).
Labour, electric insertNo published share$225 (Angi) — the lowest labour of any fireplace type; wood-burning runs up to $2,180. Installations typically take 1–3 days (Angi).
Handyman (simple installs)No published share$50–$80 per hour, minimum fee $75–$200 (HomeGuide). A plug-in unit may need no pro at all.
Assembly & customizationNo published share$350–$3,000 (HomeGuide, ALL fireplace types — labelled as such, not electric-only).
Gas-to-electric conversion extras (not a standard install)No published shareOld gas unit removal $600–$2,500; cap the gas line $75–$150 (full line removal ~$250); seal/cap the flue $150–$650; wiring materials $100–$150 (all EngineerFix conversion guide).
Running cost (not install cost)No published share$0.15 per hour with the heater on (HomeGuide); $0.15–$0.18 per hour (EngineerFix). The flame-only effect uses negligible power.
A wall-mounted linear electric fireplace set into a black-tiled wall — the flame is an LED effect, no chimney or venting needed. Wall-mounted units, installed, run $500–$2,500 (HomeGuide); a new dedicated circuit adds $250–$900.
A wall-mounted linear electric fireplace set into a black-tiled wall — the flame is an LED effect, no chimney or venting needed. Wall-mounted units, installed, run $500–$2,500 (HomeGuide); a new dedicated circuit adds $250–$900.

What moves the price most

Worked example — illustrative arithmetic from published bands (not a published quote): a standard insert unit $300–$800 (EngineerFix) + dedicated circuit labour $150–$360 (EngineerFix) = $450–$1,160, which brackets Angi's $1,000 published electric average. Each line is picked INSIDE its published band; do NOT present the $450–$1,160 as a contractor quote. A second illustration at the higher end: a wall-mounted unit at HomeGuide's $1,300 named-model price + a new circuit $250–$900 = $1,550–$2,200. Per type (HomeGuide, unit + installation unless noted): freestanding / plug-in $200–$1,500, unit only, no installation needed; insert in an existing fireplace $200–$2,000; wall-mounted, installed $500–$2,500 or more; recessed built-in, installed $1,500–$3,000 or more; premium / large-format linear inserts from ~$1,000, easily exceeding $2,000 (EngineerFix); custom built-in installations potentially exceeding $10,000 (EngineerFix). What the electrical work adds: existing outlet, plug-in — $0 labour; new outlet $150–$350 (HomeGuide); new dedicated circuit $250–$900 (HomeGuide) or $150–$360 in electrician labour alone (EngineerFix); a permanent or recessed unit usually needs a dedicated 15- or 20-amp circuit for its 1,500-watt heater. Angi: hire a local electrician to install a dedicated circuit. Where sources disagree: the three bands are NOT three estimates of the same job — HomeGuide's $200–$3,000+ covers ALL electric types from plug-in to built-in; EngineerFix's $1,200–$3,400 covers ONE type (a standard insert, professionally installed); Angi's ~$1,000 is the average across the type. Publish HomeGuide's band as typical, Angi's $1,000 as most, and EngineerFix's band as the installed-insert scope. Circuit price is the same story: HomeGuide's $250–$900 is the all-in circuit job, EngineerFix's $150–$360 is labour only, and its ~$700 is a conversion scope with permits and inspection included. Running cost and lifespan: about $0.15 per hour with the heater on (HomeGuide; EngineerFix $0.15–$0.18) — HomeGuide calls electric the lowest price to run per hour of any fireplace type, and it is nearly 100% efficient at the point of use (EngineerFix). Lifespan: electric fireplaces up to 20 years (Angi). Installations typically take 1–3 days for a full fireplace job (Angi); a plug-in unit takes under an hour. No chimney, no flue, no gas line, no venting — that is the whole point of electric, and the reason it is the cheapest fireplace to install. No clearance is needed between combustibles and the unit (cool exterior, HomeGuide), and no annual chimney cleaning. Scope — what this page is not: a gas fireplace (separate live page — electric needs no gas line and no venting); a wood-burning fireplace or wood stove (Angi: wood-burning $700–$6,500, labour up to $2,180); a masonry fireplace (HomeGuide: $3,500–$5,600 to build; authentic mason-built $10,000+); an outdoor fireplace (separate live page; electric appears there as a fuel option at $1,200–$2,500, Angi); a mantel / surround alone (separate live page — a surround is a finishing line inside an electric job here); or an electrical panel upgrade (separate live page — a dedicated circuit is a line here, not a panel job; if the panel cannot support the unit, that page's job is needed). Methodology: figures cross-checked across three independent data families — HomeGuide (updated Jan 27, 2026), Angi (updated Sep 14, 2026) and EngineerFix (insert guide + gas-to-electric conversion guide) — read in full on 2026-11-11. No % share, no standalone permits line, no trim-kit/surround line and no per-sq-ft figure is printed anywhere on this page, because no source read in full publishes one. Fixr's $750 average is not printed. Related costs: fireplace installation, fireplace insert installation, fireplace mantel installation, outdoor fireplace installation, electrical panel upgrade, outlet installation, home theater installation and recessed lighting installation.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A linear electric insert over a pebble bed with a decorated mantel above — inserts run $200–$2,000 (HomeGuide), and premium linear inserts start at ~$1,000 and easily exceed $2,000 (EngineerFix).
A linear electric insert over a pebble bed with a decorated mantel above — inserts run $200–$2,000 (HomeGuide), and premium linear inserts start at ~$1,000 and easily exceed $2,000 (EngineerFix).

Frequently asked questions

How much does it cost to install an electric fireplace?

$200–$3,000 for most homeowners, with an electric average of about $1,000 (HomeGuide, updated Jan 27, 2026; Angi, updated Sep 14, 2026). A plug-in freestanding unit can be $200–$500 with no professional labour; a wall-mounted or insert unit professionally installed is $500–$2,500; a recessed built-in is $1,500–$3,000+, and custom built-ins can exceed $10,000 (EngineerFix).

Do I need a new circuit or outlet for an electric fireplace?

Often, yes. A plug-in unit runs on a standard 120V outlet and needs nothing new (HomeGuide; EngineerFix). A permanent or recessed unit usually needs a dedicated 15- or 20-amp circuit for its 1,500-watt heater: $250–$900 (HomeGuide), or $150–$360 in electrician labour alone (EngineerFix). A new outlet is $150–$350 (HomeGuide). Angi advises hiring an electrician to install a dedicated circuit.

What is the cheapest way to add an electric fireplace?

A plug-in freestanding unit or an electric log set: $200–$500 (HomeGuide freestanding $200–$1,500 unit only; EngineerFix log set $80–$430). It slides in and plugs into an existing outlet — zero professional labour (EngineerFix). It is not a built-in fireplace, and a standard insert heats up to about 400 sq ft (EngineerFix).

How long does an electric fireplace last, and how long does installation take?

Up to 20 years (Angi). Installations typically take 1–3 days for a full fireplace job (Angi); a plug-in unit takes under an hour (HomeGuide: simply plug it in). No chimney or venting is needed, and no annual chimney cleaning — unlike gas or wood (EngineerFix).

How much does it cost to run an electric fireplace?

About $0.15 per hour with the heater on (HomeGuide; EngineerFix $0.15–$0.18). The flame-only effect uses negligible power (EngineerFix). Electric is nearly 100% efficient at the point of use (EngineerFix), and HomeGuide calls it the lowest price to run per hour of any fireplace type.

Can I convert my gas fireplace to electric, and what does it cost?

Yes — and it costs more than a fresh electric install, because the old gas unit must come out. Removal $600–$2,500, capping the gas line $75–$150 (full line removal ~$250), sealing the flue $150–$650, plus the new circuit (~$700 average including permits and inspection) and the new unit (EngineerFix). The new electric unit itself: inserts $800–$1,000, wall-mounted/built-in premium past $2,000, custom over $10,000 (EngineerFix).

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Electric Fireplace Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Red fire sprinkler riser pipes labelled SPRINKLER by zone, with pressure gauges and control valves, on the outside wall of a building

Fire Sprinkler System Installation Cost

$3,000 – $6,000

$4,500 is a DERIVED midpoint — NOT a published average: no source publishes a single national-average total for a whole-house residential system. It is 2,000 sq ft x $2.25 per sq ft, the midpoint of the $1.50–$3.00 per sq ft new-construction overlap (HomeServe, Angi, Total Fire Protection). Most new-build homes pay $3,000–$6,000; retrofitting an existing home costs $2.00–$7.00 per sq ft, about $4,000–$14,000 for the same size home. Angi's $766 'average' is NOT printed anywhere on this page — it contradicts Angi's own per-sq-ft figures and can only reflect partial or small jobs in its sample. This page covers INDOOR fire sprinklers (NFPA 13D). For lawn irrigation sprinklers, see our lawn sprinkler guide.

An open wooden roof window seen from inside a dark attic, the sloped surfaces around it lined with dark foil-faced reflective insulation

Radiant Barrier Installation Cost

$710 – $2,840

$1,700 is Angi's published national average (updated Oct 14, 2026) — NOT a derived midpoint. Professional installation runs $710–$2,840 (Angi); per square foot $0.10–$1.00 installed for foil. A barrier reflects radiant heat — it adds no R-value and does not replace insulation; it complements adequate insulation. A 1,500 sq ft attic runs about $1,050–$3,000 installed (Angi).

Technician servicing an outdoor air conditioning unit with manifold gauges and hand tools

HVAC Replacement Cost

$5,000 – $12,500

Typical full furnace and central AC change-out using existing ductwork in good condition

Technician servicing a wall-mounted tankless water heater with its cover open

Water Heater Replacement Cost

$900 – $1,900

Typical like-for-like replacement of a standard 40–50 gallon tank water heater, installed

Solar panels on tiled roofs with brick chimneys

Solar Water Heater Installation Cost

$3,000 – $6,000

A solar water heater installation typically costs $3,000 – $6,000 for a standard active system for a family home, with about $3,700 the figure most jobs land near — Angi averages $3,700 in its guide and $1,780–$5,722 across 2026 projects, while HomeGuide averages $6,000 inside its $3,000–$9,000 installed band. The guides agree on the band and differ on the average because they weight system sizes differently; passive systems sit below this band and large evacuated-tube systems above it.

Technician positioning a solar panel on a house roof

Solar Battery Installation Cost

$9,000 – $16,000

A solar battery installation typically costs $9,000 – $16,000 for a standard single battery of about 10–13.5 kWh installed, with about $12,000 the figure most jobs land near — Angi averages $10,000 inside its $6,000–$12,000 band for smaller and add-on systems, EnergySage averages $15,647 for a 13.5 kWh system at $1,159 per kWh, and the Simple Solar Guide puts a typical total at $8,000–$15,000+. The guides disagree on the average because they price different sizes: Angi's band is the smaller-battery case, EnergySage's point is one full-size battery, and this page's typical band spans both. Panels are not in this price: it is the battery, inverter and electrical work only, before any state or local incentive.