Radiant Barrier Installation cost at a glance
- Typical range: $710 – $2,840
- Most homeowners pay: around $1,700
- Prices vary most by: Professional installation labour (45–55% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: Angi, 'How Much Does a Radiant Barrier Cost to Install? [2026 Data]', updated Oct 14, 2026 (professional install $710–$2,840, national average $1,700; all-in $0.10–$1.00 per sq ft; one-sided foil material $0.10–$0.25 per sq ft, high-quality up to $0.50; two-sided foil $0.50–$0.90; spray-on coating material $0.65–$1.00 per sq ft in 5-gal buckets; labour $0.60–$1.00 per sq ft, $30–$80/hr, roughly half the project cost; by attic size 500 sq ft $350–$1,000, 1,000 $700–$2,000, 1,500 $1,050–$3,000, 2,000 $1,400–$4,000; attic insulation add-on ~$2,500 average, attic fan ~$625; savings citing DOE 5–10% cooling-cost reduction, $6.85–$13.70/month on a $137/month bill; pro install 1–2 days, larger homes 2–3 days — its own 'Is a Radiant Barrier Worth It' page (Jul 9, 2026) says $1,070–$2,635 / $1,850 average; the newer cost page is used as the headline), HomeGuide, 'How Much Does Insulation Cost? (2026)', updated Dec 19, 2025 (radiant barrier installed $0.30–$2.00 per sq ft; material $0.20–$1.40, labour $0.20–$1.40 per sq ft; garage-context reflective barrier $500–$3,200 installed; 'a radiant barrier blocks only radiant heat, while reflective insulation is a radiant barrier with an insulation layer that adds an R-value of R-3 to R-21' — HomeGuide publishes NO total-project range or national average for radiant barrier alone), Fixr, 'How Much Does Insulation Installation Cost? [2026 Data]', 2026 (radiant barrier $0.10–$0.95 per sq ft, aluminium + paper over studs/rafters/joists; general insulation labour 30–50% of total, $30–$80/hr; old-insulation removal $1–$3 per sq ft general — Fixr does NOT state whether its $0.10–$0.95 is material-only or installed, and publishes NO total-project range or average) and Attic Too Hot, 'Radiant Barriers: The Honest Assessment', accessed 2026-11-11 (professional install, full attic $500–$1,500; DIY draped foil materials $200–$400 for a 1,500 sq ft attic, foil $0.10–$0.20 per sq ft; foil-faced roof sheathing during a reroof $0.15–$0.30 per sq ft premium, $300–$600 added to a typical 2,000 sq ft reroof, no separate labour; spray-on $0.50–$1.00 per sq ft installed; emittance foil 0.03–0.05, spray-on 0.15–0.25; FSEC field research 8–12% cooling-cost reduction, attic air 10–15°F cooler at peak; payback Gulf Coast pro foil 3–7 years, spray-on 5–10 years — a single-author Gulf Coast niche site, used for reroof/sheathing and DIY figures, not as the headline range). Savings framing: U.S. Department of Energy, 'Radiant Barriers' (5–10% cooling-cost reduction in warm, sunny climates) and ORNL Radiant Barrier Fact Sheet DOE/CE-0335P (ceiling heat gain cut 16–42% in R-19 attics — explicitly NOT a bill reduction; ORNL estimates 2–10% of the cooling portion of summer bills). Synthesized typical = Angi's published most-pay band at $710–$2,840, with $1,700 most-pay at Angi's published national average; the derived midpoint $1,775 is NOT printed as an average. RemodelingExpense's $1.50–$4.00 per sq ft installed (roughly double every other source) and its '25–55% cost recovery' claim are not printed. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| DIY — draped foil retrofit | $150 – $500 | Perforated reflective foil rolls, staples and fasteners, stapled to the underside of the rafters and draped slightly between bays, facing an air gap. No labour. Materials $150–$400 for a 1,500 sq ft attic (Attic Too Hot; InsulationRValues); the upper end allows for larger attics and tape/sealant. 4–8 hours for a 1,500 sq ft attic. DIY only for accessible attics — hot, tight attics and spray-on work belong to a pro (Angi). |
| Professional — foil retrofit, stapled / draped | $710 – $2,840 | One- or two-sided foil, staples and fasteners, professional labour ($0.60–$1.00 per sq ft, $30–$80 per hour), full attic coverage, 1–2 day install. The band most professional jobs land in; the $1,700 published average sits inside it. By size (Angi): 500 sq ft $350–$1,000; 1,000 sq ft $700–$2,000; 1,500 sq ft $1,050–$3,000; 2,000 sq ft $1,400–$4,000. Two-sided foil costs more ($0.50–$0.90 per sq ft material vs $0.10–$0.50 one-sided) and reflects heat both ways. Smaller or simpler attics can come in around $500–$1,500 (Attic Too Hot, Gulf Coast). |
| Professional — spray-on radiant coating | $1,875 – $3,000 | A spray-applied metallic coating on the underside of the roof deck, professionally applied, best for hard-to-reach or irregular attics (hips, valleys, penetrations). DERIVED total for a 1,500 sq ft attic: material $0.65–$1.00 per sq ft + labour $0.60–$1.00 per sq ft (Angi) = $1.25–$2.00 per sq ft all-in. No source publishes a spray-on total directly — Attic Too Hot lists spray-on at $0.50–$1.00 per sq ft installed, which would imply $750–$1,500 for the same attic; the gap is flagged here, not smoothed over. Spray-on reflects less heat than foil (emittance 0.15–0.25 vs 0.03–0.05). |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| One-sided foil barrier, material | No published share | $0.10–$0.50 per sq ft (Angi; high-quality material up to $0.50). |
| Two-sided foil barrier, material | No published share | $0.50–$0.90 per sq ft (Angi). Reflects heat both ways. |
| Spray-on radiant coating, material | No published share | $0.65–$1.00 per sq ft (Angi); sold in 5-gallon buckets. |
| Professional installation labour | 45–55% of total | $0.60–$1.00 per sq ft; $30–$80 per hour (Angi). DERIVED share: Angi says labour is roughly half the project cost — no source publishes an exact labour %. It drives the estimator's note and the 'Prices vary most by' glance row. |
| DIY foil materials, 1,500 sq ft attic | No published share | $150–$400 total (Attic Too Hot; InsulationRValues). |
| Foil-faced sheathing premium (during a reroof) | No published share | $300–$600 total on a 2,000 sq ft roof; $0.15–$0.30 per sq ft over standard OSB, no extra labour (Attic Too Hot). The cheapest way to get a barrier — but only possible when the roof deck is already exposed. |
| Typical project by attic size, installed | No published share | 500 sq ft $350–$1,000; 1,000 sq ft $700–$2,000; 1,500 sq ft $1,050–$3,000; 2,000 sq ft $1,400–$4,000 (Angi). |
| Attic insulation add-on (if paired) | No published share | About $2,500 average (Angi). A barrier complements insulation — it never replaces it. |
| Attic fan / ventilation add-on | No published share | About $625 average (Angi). |
| Old insulation removal (if needed) | No published share | $1–$3 per sq ft (Fixr, general insulation work — not barrier-specific). |

What moves the price most
Worked example — illustrative arithmetic from published bands (not a published quote): a 1,500 sq ft attic: one-sided foil $0.25 per sq ft x 1,500 = $375 + labour $0.90 per sq ft x 1,500 = $1,350, total $1,725 — within 2% of Angi's $1,700 published average. Each line is picked INSIDE its published band; do NOT present the $1,725 as a contractor quote. Barrier type: one-sided foil is cheapest; two-sided foil costs roughly 2–4x more per sq ft in material but reflects heat both ways; spray-on costs more per sq ft than foil and needs pro application, but reaches irregular areas foil cannot. Attic size is the single biggest driver — totals scale almost linearly with square footage (Angi's size table: $350–$1,000 at 500 sq ft up to $1,400–$4,000 at 2,000 sq ft). Access and geometry: steep pitches, low clearances, hips, valleys and many penetrations slow stapling and push labour up; spray-on is faster in complex attics but costs more per sq ft. New vs retrofit: adding foil-faced sheathing during a reroof or new build adds only $300–$600 with no extra labour; retrofitting an existing attic is a standalone job with full labour. Climate: barriers pay back in hot, sunny climates (DOE 5–10% cooling savings; Florida field studies 8–12%); in cool climates adding insulation is usually the better spend, and a barrier may never pay for itself. Existing insulation level: returns diminish above R-30/R-38 — the barrier matters most where insulation is adequate (R-19 or better) but ducts run through a hot attic. Ventilation and add-ons: a barrier works best with a ventilated attic; pairing it with new insulation (about $2,500) or an attic fan (about $625) raises the ticket but is often the point of the job. Perforated vs non-perforated foil: in humid climates foil MUST be perforated so moisture vapour can pass; non-perforated foil can trap moisture and cause condensation and mould (Attic Too Hot). Labour rates and region: $30–$80 per hour (Angi); hot-climate markets with more barrier installers (Texas, Florida, Arizona) tend to price at the lower end. Where sources disagree: Angi contradicts itself — its cost page (Oct 14, 2026) says $710–$2,840 with a $1,700 average; its 'Is a Radiant Barrier Worth It' page (Jul 9, 2026) says $1,070–$2,635 with a $1,850 average. This page uses the newer cost page as the headline. And the savings figures are NOT interchangeable: the DOE reports 5–10% cooling-cost reduction in warm, sunny climates; Florida field studies found 8–12%; the 16–42% figure is the reduction in ceiling HEAT GAIN in Oak Ridge lab tests, not a bill reduction (ORNL: 2–10% of the cooling portion of the bill). Never print '16–42% savings on your bill'. Methodology: figures cross-checked across three independent data families — Angi (updated Oct 14, 2026), HomeGuide (updated Dec 19, 2025) and Fixr (2026) — plus Attic Too Hot for reroof/sheathing and DIY figures and the DOE/ORNL for savings framing, read in full on 2026-11-11. RemodelingExpense's $1.50–$4.00 per sq ft installed is an outlier at roughly double every other source and is not printed. Spray-foam prices are a different product and are listed only as an add-on. Related costs: attic insulation (pairs with a barrier — never replaced by one), roof replacement, attic fan installation, spray foam insulation, home energy audit, wall insulation installation and whole house fan installation.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does radiant barrier installation cost?
$710–$2,840 for a professional install, with most homeowners paying around $1,700 (Angi, updated Oct 2026). Per square foot, foil runs $0.10–$1.00 installed and spray-on coating $0.65–$1.00 in material alone. Smaller or simpler attics can come in around $500–$1,500.
Is a radiant barrier worth it?
In a hot, sunny climate, yes — the Department of Energy reports 5–10% cooling-cost savings, and Florida field studies found 8–12%. In cool climates, adding insulation is usually a better use of the money, and payback stretches to 5–10 years (spray-on) or never.
Does a radiant barrier add R-value or replace insulation?
No. A radiant barrier reflects radiant heat; it has no R-value and does not replace insulation. It works as a complement to adequate insulation (R-19 or better) — and a reflective insulation product (barrier + thermal layer) is a different, pricier product that does add R-3 to R-21.
Can I install a radiant barrier myself?
Yes, for draped foil in an accessible attic: materials run $150–$400 for a 1,500 sq ft attic and take 4–8 hours. Professionals finish a full attic in 1–2 days. Spray-on coating is a pro job (volatile compounds, specialised equipment). Never lay foil flat on top of insulation — it needs an air gap on at least one side to work.
Foil or spray-on — which is better?
Foil is cheaper and reflects more heat (emittance 0.03–0.05, reflects 95–97% of radiant heat). Spray-on ($0.65–$1.00 per sq ft material) is easier in hard-to-reach or irregular attics but reflects less (emittance 0.15–0.25) and has less field-study backing. For a standard attic, foil delivers more reflective benefit per dollar.
How much can a radiant barrier save on energy bills?
About 5–10% of cooling costs in warm, sunny climates (DOE) — roughly $7–$14 a month on a $137 average US electric bill, or $82–$164 a year; up to $164–$326 a year in hot states like Florida. Do not confuse this with the 16–42% figure, which is the reduction in ceiling heat gain in lab tests, not a bill reduction.






