Gutter Installation cost at a glance
- Typical range: $1,050 – $1,800
- Most homeowners pay: around $1,400
- Prices vary most by: Gutter material, downspouts & fittings stock (40–50% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: the Angi gutter installation and aluminum gutter cost guides, HomeGuide's gutter installation cost guide and LendEdu's gutter installation cost guide. Sources last checked: October 2026 — HomeGuide, Angi. Last updated October 2026 · How we calculate these costs
Cost by scope
| Scope | Typical cost | What it includes |
|---|---|---|
| Vinyl or sectional aluminum, small home — about 100 linear feet | $500 – $1,200 | The budget formats: Angi prices vinyl at $5–$10 per linear foot installed and HomeGuide vinyl at $8–$12; sectional aluminum runs $4–$8 per linear foot in HomeGuide's aluminum guide — seams are the trade-off at this tier |
| Seamless aluminum, average home — about 150 linear feet | $1,050 – $1,800 | The typical band on this page, and Angi's own size table exactly: 150 linear feet of aluminum at $1,050–$1,800, at $7–$12 per linear foot; HomeGuide's seamless aluminum runs $6–$12 per linear foot |
| Premium metal, two-story or complex roofline — about 200 linear feet | $2,500 – $8,000 | Steel runs $10–$35 per linear foot and copper $25–$40 in HomeGuide (copper totals $5,000–$8,000 for 200 linear feet); two-story work adds $1–$3 per linear foot in HomeGuide for the height and access |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Gutter material, downspouts & fittings stock | 40–50% of total | The gutter run itself, downspouts ($30–$75 each installed in HomeGuide), elbows, end caps and splash blocks — aluminum is the mid-priced material in every guide's ladder, between vinyl below and steel and copper above |
| Installation labor | 35–45% | Forming seamless runs on site, pitching them correctly to the downspouts, hanging and sealing — Angi's general guide averages $1,180 across all project types, and height and roof complexity move this line most |
| Hangers, corners & sealant | 5–10% | Hidden hangers, mitered corners, sealant and fasteners — the small hardware that decides whether a run stays pitched and leak-free, priced inside the per-foot rate in the guides |
| Old gutter removal & disposal | 5–10% | HomeGuide prices removal and disposal of an existing system at $50–$200 flat and old-gutter removal at $1–$2 per linear foot on seamless work — a replacement quote should name it, a new-build quote should not carry it |
What moves the price most
Material is the gutter budget. HomeGuide's material ladder runs from vinyl at $8–$12 per linear foot installed through aluminum at $10–$20 and steel at $10–$35 to copper at $25–$40 and zinc at $35–$45 — the same roofline prices five ways. The standard seamless-aluminum overlap of Angi ($7–$12 per linear foot on its size tables), HomeGuide's seamless guide ($6–$12) and HomeGuide's aluminum guide ($4–$12 sectional, $6–$12 seamless) is the rate this page publishes as typical. Linear feet, not house size, is the measure: most homes carry 100–200 linear feet of gutter in HomeGuide, roughly a tenth of the home's square footage, and every guide prices by that foot. Height and roof complexity are the third lever: a second story adds $1–$3 per linear foot in HomeGuide, and steep or cut-up rooflines add 10–30% for access and safety. Finally, what is behind the gutter matters: rotted fascia must be repaired before new gutters go up — HomeGuide prices fascia replacement at $5–$12 per linear foot — and gutter guards, when they are in the scope, are a separate system at $15–$45 per linear foot, not a line to discover on the invoice.
Worked example: how a typical gutter installation budget breaks down
A typical job: about 150 linear feet of seamless aluminum K-style gutters on a single-story home, four downspouts, old gutters removed and hauled away. The budget below totals $1,400 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.
| Line item | Example budget |
|---|---|
| Gutter material, downspouts and fittings stock | $630 |
| Installation labor | $560 |
| Hangers, corners and sealant | $98 |
| Old gutter removal and disposal | $112 |
| Total | $1,400 |
What most people get wrong
- Comparing quotes by the total without the linear feet — two quotes for 'the house' can be measuring different rooflines; the per-foot rate and the measured length are the comparison.
- Replacing gutters over rotted fascia — new runs hung on soft boards sag and pull away, and the fascia repair ($5–$12 per linear foot in HomeGuide) is cheaper before the gutters go up.
- Pricing gutter guards inside the gutter quote — guards are a separate system at $15–$45 per linear foot in HomeGuide and can cost more than the gutters; keep the two scopes separate on paper.
- Undersizing to save money — a 6-inch gutter adds only $1–$2 per linear foot in HomeGuide, and an overflowing 5-inch run on a large or steep roof is the expensive outcome.
Costs in your city
Gutter pricing follows roof height and rainfall more than material: the same aluminum run costs more where two-story homes dominate and installers work from lifts, and heavy-rain regions size up to 6-inch gutters and extra downspouts as standard, which moves the per-foot rate before labour is counted. Snow-belt markets add ice-load hangers and closer hanger spacing. Ask each bidder for the measured linear feet, the gutter size they are pricing, and whether fascia condition was checked; on gutters, those answers separate a measured quote from a guessed one.
Frequently asked questions
How much does gutter installation cost for an average home?
About $1,050–$1,800 is the typical band on this page for about 150 linear feet of seamless aluminum, with most projects landing around $1,400. Angi's aluminum guide averages $2,400 across larger and more varied projects ($900–$3,300), its general guide averages $1,180, and HomeGuide puts an average home at $2,200–$5,000 across all materials at $12–$25 per linear foot.
How much do gutters cost per linear foot installed?
For standard aluminum, about $7–$12 per linear foot seamless — Angi's size tables and HomeGuide's seamless and aluminum guides agree on that band. Across all materials the guides run wider: vinyl $5–$12, steel $10–$35 and copper $25–$40 per linear foot in HomeGuide.
How many linear feet of gutters does a house need?
Most homes need 100–200 linear feet — HomeGuide puts it at roughly a tenth of the home's square footage, so a 1,500 sq ft home carries about 150 linear feet. Measure the eaves that actually shed water, add the downspout drops, and price that total, not the floor plan.
Are seamless gutters worth the extra cost?
On the guides' numbers, seamless aluminum at $6–$12 per linear foot in HomeGuide sits inside the sectional band ($4–$8) plus a small premium, and buys a run with joints only at the corners — the seams a sectional system carries every 10 feet are its leak and clog points. For a house you plan to keep, the premium is one of the smaller ones in this guide.
How long do new gutters last?
By material, in HomeGuide's lifespan table: vinyl 10–20 years, aluminum 20–30, steel 20–50, copper 50–100 and zinc 30–80+. Lifespan assumes the runs are cleaned and the pitch is checked — a sagging, overflowing gutter ages the fascia and siding behind it faster than the gutter itself ages.
