Home › Cost Guides › Metal Siding Installation
Cost Guide

How Much Does a Metal Siding Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$9,000 – $19,500
Most homeowners pay around $11,341 · $11,341 is Angi's published national average (updated Oct 16, 2026, 194 verified projects) — NOT a derived midpoint. Most homeowners pay $9,000–$19,500; at $4–$16 per sq ft installed for steel and aluminum. Fixr publishes a higher $17,000 editorial average with no stated methodology — carried as a note, never as the average. Prices are per square foot of exterior WALL area, not floor area.
typical
$9,000$19,500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Houses in Reykjavik clad in corrugated metal siding in black and green, with scaffolding in front of one house

Metal Siding Installation cost at a glance

  • Typical range: $9,000 – $19,500
  • Most homeowners pay: around $11,341
  • Per square foot: $4–$16 per sq ft
  • Prices vary most by: Installation labour (30–60% of the budget)

Cross-checked against five published sources for this project. Sources used for this page: Fixr, 'How Much Does Metal Siding Cost in 2026?', 2026 edition (typical total $9,000–$28,000; national average $17,000 with NO stated methodology — carried as an editorial figure, never as the surveyed average; per sq ft installed $4–$16 of wall area; by material aluminium $3–$18, steel Galvalume $4–$12, steel coated/painted $7–$16, zinc $20–$45, copper $30–$50; by style corrugated $7–$12, Ag panel/PBR $7–$12, board and batten $9–$14, wood-grain/plank $9–$14, standing seam/T-groove $10–$16; house-size table 1,500 sq ft home ~1,600 sq ft wall $4,800–$28,800 aluminium / $6,400–$25,600 steel, 2,000 sq ft home ~2,000 wall $6,000–$36,000 / $8,000–$32,000; labour $2–$12 per sq ft, typically 30–60% of total; tear-off $1,000–$2,500; substrate repairs $2–$5 per sq ft; permits $150–$1,500, up to $3,000 in heavily regulated areas; insulation board +$1–$2.50 per sq ft; paint/custom colour $1–$3 per sq ft; 26-gauge ~20–25% more than 29-gauge; waste allowance ~10% simple, up to 20% complex; lifespan 40–70 years, zinc 80–100, copper 100+; DIY saves roughly 30–40%), Angi, 'How Much Does Metal Siding Cost to Install? [2026 Data]', updated Oct 16, 2026 (typical $3,958–$19,439; NATIONAL AVERAGE $11,341, 194 verified projects; per sq ft $1–$35 full span incl. tin/copper; by metal tin $1–$3, aluminium $3–$18, steel $4–$16, zinc $15–$25, copper $20–$35; 'most steel siding costs $4–$8 per sq ft installed'; corrugated steel $5–$8, seamless/concealed-fastener steel up to $16; labour 30–60% of total; old siding removal ~$1 per sq ft; residential most commonly 24- and 26-gauge; concealed-fastener panels 'twice as expensive' as exposed-fastener to install; finishes galvanized 26-gauge $1.50–$2, 24-gauge $2.50–$3, SMP $2–$2.50, PVDF standard $2.50–$3, PVDF specialty $3.75–$4.25, PVDF on aluminium $3.50–$6.50, PVDF 15–35% more than SMP; fasteners $0.10–$0.15 each; trim $1–$2.50 per linear foot exposed fastener, $2–$5 concealed; DIY saves $3,350–$6,700 on average; lifespan steel/aluminium ~50 years — its '86% ROI' claim has NO source and is NOT printed) and SidingQuotesNearMe, 'Metal Siding Cost: Price Per Sq Ft & Is It Worth It?', corrected Sep 11, 2026 (typical $5–$15 per sq ft installed; 2,000 sq ft home ~1,500 sq ft wall $7,500–$22,500; aluminium $4–$9, steel galvanized $5–$12, corrugated $4–$8, zinc $12–$20, Corten $10–$18, copper $15–$30+; aluminium material $2–$5 + installation $2–$4 per sq ft, 1,500 sq ft project ~$6,000–$13,500; steel 1,500 sq ft ~$7,500–$18,000; insulated panels +$1–$3 per sq ft; removal $1,000–$3,000; trim/flashing 15–25% of total; coastal/high-cost areas 20–30% above national averages; lifespan 40–70 years; comparison vinyl $4–$9, fiber cement $6–$13 per sq ft installed; Remodeling Magazine 2024 Cost vs. Value fiber-cement $20,619 avg, 88.4% recouped — metal siding is NOT tracked as a separate category). Corroboration only (same dataset as Angi, not a 4th independent source): HomeAdvisor, 'What Does Metal Siding Cost to Install? [2025 Data]' (identical $11,341 / $3,958–$19,439 figures; soffit and gutter repair $1,050–$3,300). Synthesized typical = the $9,000–$19,439 overlap of all three sources, rounded to $9,000–$19,500, with $11,341 most-pay at Angi's surveyed national average; the derived midpoint ~$14,200 is NOT printed as an average. Zinc/copper figures are premium/accent metals only, never the headline range. Checked November 2026.. Sources last checked: October 2026 — Remodeling Magazine, HomeAdvisor, Fixr, Angi, Cost vs. Value. How we calculate these costs

Cost by scope

Metal Siding Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — corrugated / exposed-fastener steel or aluminum$7,000 – $12,000Corrugated or Ag/R-panel steel or aluminum panels, exposed fasteners, standard galvanized or SMP paint finish, 29-gauge steel, basic J-channel and corner trim, installation on a simple single-story wall. No insulation backing, no tear-off of old siding. (Fixr corrugated $7–$12 per sq ft; Angi corrugated steel $5–$8; SidingQuotesNearMe corrugated $4–$8.)
Mid-range — painted steel or aluminum lap / board-and-batten$12,000 – $20,000Factory-painted (SMP or PVDF) steel or aluminum lap, board-and-batten or wood-grain panels, concealed or semi-concealed fasteners, 26-gauge steel, custom-bent trim around windows, doors and corners, house wrap, old-siding tear-off and disposal, permit. (Fixr board-and-batten / wood-grain $9–$14 per sq ft; SidingQuotesNearMe steel $5–$12 and aluminum $4–$9; Angi steel $4–$16.)
Premium — standing-seam steel / aluminum, PVDF (Kynar) finish$20,000 – $32,000+Standing-seam panels with fully concealed fasteners, 26-gauge (or thicker) steel or premium aluminum, PVDF/Kynar factory finish with a 30–40-year paint warranty, insulated foam-backed panels, full custom trim and flashing package, tear-off, substrate repair allowance, permit. Large or two-story homes go higher. (Fixr standing seam $10–$16 per sq ft; Angi seamless steel up to $16; Fixr 2,000 sq ft home steel up to $32,000.)

Where the money goes

Part of the jobShareNote
Steel panels, installedNo published share$5–$12 per sq ft (SidingQuotesNearMe); $8,000–$19,200 for a typical 1,600 sq ft wall area (derived). Fixr Galvalume $4–$12, coated $7–$16; Angi $4–$16. Choose one metal: the steel and aluminium panel rows are alternatives, never additive.
Aluminium panels, installedNo published share$4–$9 per sq ft (SidingQuotesNearMe); $6,400–$14,400 for a typical 1,600 sq ft wall area (derived). Angi and Fixr $3–$18 is the full span including premium thick-gauge aluminium.
Installation labour30–60% of total$2–$12 per sq ft (Fixr); labour is 30–60% of total project cost (Angi and Fixr agree). Concealed-fastener panels cost roughly twice as much to install as exposed-fastener panels (Angi).
Old siding removal & disposalNo published share$1,000–$3,000 (Fixr $1,000–$2,500; SidingQuotesNearMe $1,000–$3,000; Angi about $1 per sq ft). Installing over sound existing siding on furring strips can avoid this line entirely.
Trim, flashing & custom brake work15–25% of total15–25% of total project cost (SidingQuotesNearMe); trim $1–$2.50 per linear foot (exposed fastener) or $2–$5 (concealed fastener) (Angi).
Insulated foam backingNo published share+$1–$2.50 per sq ft (Fixr); +$1–$3 per sq ft (SidingQuotesNearMe).
Building permitNo published share$150–$1,500 typical, up to $3,000 in heavily regulated areas (Fixr).
Substrate / wall repairs after tear-offNo published share$2–$5 per sq ft of damaged area only (Fixr) — budget a contingency, not a fixed line.
Soffit & gutter repair / replacementNo published share$1,050–$3,300 (HomeAdvisor) — often needed when siding comes off.
Fasteners & accessoriesNo published share$0.10–$0.15 per fastener (Angi).
Estimator’s note: on a metal siding installation, installation labour is usually where quotes swing most (30–60% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A corrugated metal facade with a door and roller shutter in warm sunlight. Installation labour is 30–60% of the total on most metal siding jobs (Angi and Fixr agree), so the crew's time — not just the panels — drives the quote.
A corrugated metal facade with a door and roller shutter in warm sunlight. Installation labour is 30–60% of the total on most metal siding jobs (Angi and Fixr agree), so the crew's time — not just the panels — drives the quote.

What moves the price most

Worked example — illustrative arithmetic from published bands (not a published quote): a mid-range steel job on a 1,600 sq ft wall area: panels $8,000 (1,600 sq ft x $5 per sq ft, SidingQuotesNearMe steel low end) + labour $3,200 (1,600 x $2 per sq ft, Fixr labour floor) + removal $1,500 (inside Fixr's $1,000–$2,500) + trim $2,400 (16% of the example total, inside SidingQuotesNearMe's 15–25% band) + permit $500 (inside Fixr's $150–$1,500) = $15,600, inside the $9,000–$19,500 typical band. Each line is picked INSIDE its published band; do NOT present the $15,600 as a contractor quote. Metal type: aluminum is lighter, naturally rust-proof and cheaper to install; steel is stronger and more dent-resistant but can rust where scratched. Zinc and copper are premium metals ($12–$50 per sq ft) and belong on accent walls or architect-designed homes, not in the headline range for this page. Panel profile and fastener system: exposed-fastener corrugated/Ag panels install fastest and cheapest; concealed-fastener standing seam and board-and-batten need precision alignment and cost roughly twice as much to install (Angi). Gauge: thicker steel (26-gauge vs 29-gauge) costs about 20–25% more but resists hail, wind and oil-canning better (Fixr). Finish: bare Galvalume is cheapest; SMP paint is the economy painted finish; PVDF/Kynar costs 15–35% more than SMP with a 30–40-year paint warranty (Angi, Fixr). Home size and complexity: cost is priced per square foot of WALL area, not floor area; two-story walls, dormers, bay windows and many openings add cutting, waste (up to 20%) and labour hours (Fixr). Labour market: 30–60% of the total; coastal and high-cost-of-living areas run 20–30% above national averages (SidingQuotesNearMe). Old siding: tear-off $1,000–$3,000; installing over sound existing siding on furring strips can avoid it (Fixr, SidingQuotesNearMe). Insulation: foam-backed panels add $1–$3 per sq ft but cut rain noise and can reduce HVAC costs (Fixr, SidingQuotesNearMe). Climate: aluminum is the pick for coastal salt air (it will not rust); steel is the pick for hail and impact resistance; metal is non-combustible and Class A fire-rated, a real factor in wildfire zones (all three sources). Where sources disagree: the national average — Angi $11,341 (194 verified projects, surveyed) vs Fixr $17,000 (no stated methodology). This page prints Angi's as the surveyed average and notes Fixr's higher figure as an editorial average. The top of the range differs the same way: Fixr $28,000 vs Angi $19,439 vs SidingQuotesNearMe $22,500 — the difference is house size and premium profiles (standing seam, zinc), and the $9,000–$19,500 overlap band covers the common case. Aluminium's top end is $18 per sq ft in Angi/Fixr vs $9 in SidingQuotesNearMe — the $18 figure is premium thick-gauge aluminium; $4–$9 is standard residential aluminium. Methodology: figures cross-checked across three independent data families — Fixr (2026 edition), Angi (updated Oct 16, 2026) and SidingQuotesNearMe (corrected Sep 11, 2026) — read in full on 2026-11-11. HomeAdvisor publishes Angi's identical figures (same company, same dataset) and is corroboration only, not a fourth independent source. Angi's '86% ROI' claim has no source and is not printed; Remodeling Magazine's Cost vs. Value Report does not track metal siding as a category. Lifespan: 40–70 years (Fixr, SidingQuotesNearMe); Angi puts steel and aluminum at around 50 years. Related costs: aluminum siding installation (the aluminum-only page), vinyl siding installation, fiber cement siding installation, wood siding installation, siding replacement, house painting exterior, gutter installation and soffit and fascia installation.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Vertical blue corrugated metal siding above white horizontal metal siding on one facade. Corrugated is the cheapest profile at $5–$12 per sq ft installed; standing seam is the premium profile at $10–$16 (Fixr, Angi).
Vertical blue corrugated metal siding above white horizontal metal siding on one facade. Corrugated is the cheapest profile at $5–$12 per sq ft installed; standing seam is the premium profile at $10–$16 (Fixr, Angi).

Frequently asked questions

How much does metal siding cost per square foot?

$4–$16 per square foot installed for steel and aluminum (Fixr). Aluminum typically $4–$9 and steel $5–$12 (SidingQuotesNearMe); corrugated is cheapest at $5–$12 and standing seam is the premium profile at $10–$16 (Fixr, Angi).

How much does it cost to put metal siding on a house?

Most homeowners pay $9,000–$19,500, with a national average of $11,341 from Angi's survey of 194 verified projects. Premium standing-seam jobs on larger homes can reach $28,000–$32,000 (Fixr).

Is steel or aluminum siding better?

Steel is stronger and more dent- and impact-resistant; aluminum is lighter, naturally rust-proof and easier to install, so it is the better choice in coastal areas with salt air. Prices are similar — aluminum $4–$9 per sq ft, steel $5–$12 per sq ft installed (SidingQuotesNearMe). Both last 40–70 years (Fixr, SidingQuotesNearMe).

How long does metal siding last?

40–70 years with minimal maintenance (Fixr, SidingQuotesNearMe); Angi puts steel and aluminum at around 50 years. Factory PVDF paint warranties run 30–40 years. Zinc lasts 80–100 years and copper 100+ (Fixr, Angi).

Can metal siding go over existing siding?

Yes — if the existing siding is sound, metal can be installed over it on furring strips, which avoids the $1,000–$3,000 tear-off cost (Fixr, SidingQuotesNearMe). Rotted or water-damaged siding must come off first, and hidden rot repairs run $2–$5 per sq ft (Fixr).

Is metal siding fireproof?

Not fireproof, but non-combustible and Class A fire-rated — it will not ignite or feed a fire, though it can soften and deform at extreme temperatures (Fixr, SidingQuotesNearMe). That makes it a strong choice in wildfire-prone areas.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Metal Siding Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Row houses with pastel painted plaster facades

Stucco Siding Installation Cost

$2,200 – $9,100

Stucco siding installation typically costs $2,200 – $9,100 for a standard job, with about $5,700 the figure most jobs land near — Angi's stucco guide, updated July 9, 2026, averages about $5,700 with most homeowners paying $2,200–$9,100 at $7–$9 per sq ft installed, and prices traditional cement stucco at $6–$9 per square foot, synthetic EIFS at $7–$10 and one-coat systems at $5–$7; HomeGuide prices stucco at $7–$17 per sq ft installed, or $17,500–$42,500 for a 2,500-square-foot house; and This Old House, using Homewyse data, prices stucco at $9.66 per sq ft installed with a 2,000-square-foot home averaging $19,320. HomeGuide's and This Old House's higher totals are published as their larger-house, all-in scope rather than averaged away — this page's typical band follows Angi's band. The cement, lath, mesh, coats and labor below are all inside the total for a standard traditional job, while synthetic EIFS systems — Angi prices them at $7–$10 per square foot — and moisture-barrier work in wet climates are tiered and published separately.

Brick-faced house with a covered porch

Brick Veneer Installation Cost

$12,000 – $36,000

Brick veneer installation typically costs $12,000 – $36,000 for full-size veneer on a 2,000-square-foot home, with about $26,000 the figure most jobs land near — Angi's brick siding guide, updated October 23, 2026, averages $26,000 for a 2,000-square-foot home with most homeowners paying $22,500–$70,000 at $9–$28 per sq ft installed, and prices thin brick veneer strips at $3–$10 per square foot for materials, faux brick panels at $6–$11 and face brick at $4–$8; HomeGuide prices thin brick at $8–$18 per sq ft installed, full-size brick veneer at $12–$18 and faux panels at $14–$24, with the front of a house running $2,000–$18,000 for 250–750 square feet; and Fixr averages $26,000 with most at $22,500–$50,000, pricing thin veneer at $8–$18, brick veneer at $12–$18 and solid brick at $14–$30 per square foot, and a 2,000-square-foot home at $12,000–$36,000 by wall area. Angi's wider most-pay band is published as its premium and solid-brick scope rather than averaged away — this page's typical band follows Fixr's wall-area band for full-size veneer. The brick, mortar, ties, flashing and masonry labor below are all inside the total for a standard full-size veneer job, while thin-brick front-only work — HomeGuide prices it from $2,000 for 250 square feet — and foundation shelf modifications are tiered and published separately.

Large stone-faced house with gardens

Stone Veneer Installation Cost

$13,000 – $22,000

Stone veneer installation typically costs $13,000 – $22,000 for 1,000 square feet of manufactured stone veneer on a house exterior, with about $16,000 the figure most jobs land near — Angi averages $16,000 with most at $13,000–$22,000 at $13–$22 per square foot installed, HomeGuide prices cultured stone at $10–$35 per square foot installed or $10,000–$35,000 for a house, and This Old House puts stone veneer material at $5–$20 per square foot with labor at $3–$12. The veneer, lath, scratch coat, mortar, labor, moisture barrier and wall preparation below are all inside the total for the stated coverage, while full-thickness natural stone — Angi prices natural stone material alone at about $42 per square foot — is a different, dearer job, tiered separately.

House with a spacious wooden deck and railing in the backyard

Deck Building Cost

$7,500 – $16,000

Typical professionally built deck of about 300 sq ft with railing and stairs — about $25 – $50 per sq ft installed

Covered boardwalk deck at night with recessed lights in the deck surface

Deck Lighting Installation Cost

$1,200 – $3,000

A professionally installed low-voltage system of about 10 fixtures on a standard deck — solar and string options priced separately below

Lakeside deck with a wooden bench and metal chairs

Composite Decking Installation Cost

$12,000 – $24,000

Composite decking installation typically costs $12,000 – $24,000 for about 300 square feet of full new build with a new substructure, with about $18,000 the figure most jobs land near — HomeGuide prices composite at $40–$80 per square foot installed including substructure, or $16,000–$32,000 for a 400-square-foot deck, while Angi, updated September 29, 2026, gives $5,400–$11,500 for a standard deck installation project with a national average of $8,500 and prices a pro build at $25–$54 per square foot; and EngineerFix prices a standard project at $25–$50 per square foot. EngineerFix's band is surface-only, excluding major structural changes, and Angi's is a lower-spec full build — the disagreement is published here as a scope split, not averaged away — and this page's typical band follows HomeGuide's full-build scope, with $18,000 the midpoint of that 300-square-foot band rather than a guide-stated average. The framing, boards, fasteners, labor, railing and permits below are all inside the total for a standard attached ground-level build, while demolition at $5–$15 per square foot in Angi and permits at $225–$500 are tiered and published separately.