Home › Cost Guides › Vinyl Siding Installation
Cost Guide

How Much Does a Vinyl Siding Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$6,400 – $18,400
Most homeowners pay around $12,300 · Vinyl siding installation typically costs $6,400 – $18,400 for a full house in standard vinyl, with about $12,300 the figure most jobs land near — Angi averages $12,303 with most at $6,368–$18,377 at $3–$12 per square foot installed across 5,282 verified projects, HomeGuide prices vinyl at $4–$12 per square foot installed or $10,000–$30,000 for a 2,500-square-foot house, and This Old House prices vinyl at $3–$12 per square foot with an average vinyl project on a 2,000-square-foot home at $12,252. The panels, trim, house wrap and labor below are all inside the total for a full-house job, while removing old siding and repairing sheathing underneath — Angi names removal and structural repairs as the main spread drivers — is priced on the condition found, not assumed away.
typical
$6,400$18,400
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Suburban home with light lap siding, front porch and lawn

Vinyl Siding Installation cost at a glance

  • Typical range: $6,400 – $18,400
  • Most homeowners pay: around $12,300
  • Prices vary most by: Installation labor (40–55% of the budget)

Cross-checked against four published sources for this project. Sources used for this page: Angi's vinyl siding installation cost guide, updated September 9, 2026 (national average $12,303 across 5,282 verified projects, most $6,368–$18,377; $3–$12 per square foot installed; standard residential grade $4.50–$6 per square foot, premium grade $8–$12; labor $1–$4 per square foot for siding generally, $2–$5 for vinyl in NerdWallet's Angi-based summary), HomeGuide's house siding cost guide (vinyl $4–$12 per square foot installed, $10,000–$30,000 for a 2,500-square-foot house; overall siding $4–$13 per square foot) and This Old House's siding replacement cost guide (vinyl $3–$12 per square foot installed, average vinyl project on a 2,000-square-foot home $12,252; vinyl material $3.16 and installed $6.13 per square foot on average in its material table). Sources last checked: October 2026 — This Old House, NerdWallet, HomeGuide, Angi. How we calculate these costs

Cost by scope

Vinyl Siding Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Small home or front-only, builder grade$3,000 – $7,000The cheap end: Angi's $3 per square foot floor and the economy grade in its grade ladder — a smaller wall area or a front-only job in thin builder panels, not a full-house standard job
Standard full house — the typical job$6,400 – $18,400The shared band itself: Angi averages $12,303 for this scope at $3–$12 per square foot, HomeGuide's $4–$12 band contains it, and This Old House's $12,252 average for a 2,000-square-foot home sits inside it
Premium or insulated panels, large or complex house — the top end$18,000 – $30,000+The expensive end: HomeGuide runs a 2,500-square-foot house to $30,000 at $4–$12 per square foot, and premium and insulated panels sit at $6–$10 per square foot in the grade ladder against $4.50–$7 for standard residential grade

Where the money goes

Part of the jobShareNote
Vinyl panels (grade and thickness)35–50% of totalThe panels: Angi prices installed vinyl at $3–$12 per square foot overall, with standard residential grade at $4.50–$6 and premium at $8–$12 — thickness and profile are the ladder inside this line
Installation labor40–55% of totalThe fitting: NerdWallet's Angi-based summary prices vinyl labor at $2–$5 per square foot and up to half the total, and Angi prices siding labor generally at $1–$4 per square foot — stories, gables and corners move this line most
Trim, soffit, fascia and accessories10–20% of totalThe finishing: corner posts, J-channels, soffit and fascia are priced with the panels in a complete quote, and skipping them from the comparison is how two quotes for the same walls stop matching
House wrap, prep and old-siding removal5–15% of totalThe prep: house wrap goes on before the first panel, and Angi names old-siding removal and structural repairs as a main spread driver — a quote that assumes sound sheathing underneath is not yet a complete quote
Vinyl panels (grade and thickness) · 35–50%Installation labor · 40–55%Trim, soffit, fascia and accessories · 10–20%House wrap, prep and old-siding removal · 5–15%
Estimator’s note: on a vinyl siding installation, installation labor is usually where quotes swing most (40–55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A lap-sided house from below: siding is priced per square foot of wall, so stories, gables and corners move the total more than floor area does
A lap-sided house from below: siding is priced per square foot of wall, so stories, gables and corners move the total more than floor area does

What moves the price most

Wall area is the first driver: siding is priced per square foot of wall, not floor area — HomeGuide's 2,500-square-foot-house table ($10,000–$30,000) and This Old House's 2,000-square-foot-home average ($12,252) are different wall areas, which is why the totals differ. Grade is second: Angi's ladder runs from builder grade near $3 per square foot to premium and insulated panels at $8–$12, and insulated panels add rigidity and a small insulation value for that premium. House shape is third: two stories, gables, dormers and many corners add cutting and scaffold time per square foot, and Angi lists home size and complexity as the main spread drivers. Finally, what comes off matters: removal and sheathing repair are condition-priced, so the cheapest quote on sound walls and the cheapest quote on rotten walls are not the same job.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Lap siding with corner boards and a downspout: trim and accessories are a separate line in every vinyl quote, and corners take more fitting time than flat wall
Lap siding with corner boards and a downspout: trim and accessories are a separate line in every vinyl quote, and corners take more fitting time than flat wall

Frequently asked questions

How much does vinyl siding cost per square foot installed?

Typically $3–$12 per square foot installed — Angi prices vinyl at $3–$12, HomeGuide at $4–$12, and This Old House at $3–$12, with most mid-grade work at $4–$8 per square foot.

How much does it cost to put vinyl siding on a whole house?

Typically $6,400–$18,400 for a full house, most near $12,300 — Angi averages $12,303 with most at $6,368–$18,377, and This Old House averages $12,252 for a 2,000-square-foot home.

How long does vinyl siding last?

Angi's material table gives vinyl a 20–40-year lifespan, and HomeGuide's table gives 30–40 years — the spread is grade and exposure, with premium panels at the long end.

Does vinyl siding ever need painting?

No — vinyl is coloured through the panel and never needs repainting, which This Old House notes as its maintenance advantage over wood; fading and cracking in extreme cold are its wear modes instead.

Is insulated vinyl siding worth the extra cost?

Insulated panels sit at the top of the grade ladder at $6–$10 per square foot against $4.50–$7 for standard residential grade, so the premium buys rigidity and a small insulation value — on a flat, single-story wall the standard panel usually wins on value.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Vinyl Siding Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Modern house with dark panel cladding and a bay window

Fiber Cement Siding Installation Cost

$6,600 – $23,200

Fiber cement siding installation typically costs $6,600 – $23,200 for a full house in standard lap boards, with about $14,900 the figure most jobs land near — Angi averages $14,901 with most at $6,583–$23,219 at $7–$18 per square foot installed across 2,297 verified projects, HomeGuide prices fiber cement at $6–$15 per square foot installed or $15,000–$37,500 for a 2,500-square-foot house, and Fixr averages $15,000 with most at $8,000–$26,600 at $5–$14 per square foot. The boards, trim, house wrap, flashing and labor below are all inside the total for a standard lap job, while panel and shingle styles — Angi prices panels at $6–$18 and shingles at $5–$14 per square foot — and factory-finished color are tiered separately, not averaged into the lap band.

Modern house with warm wood cladding at sunset

Wood Siding Installation Cost

$8,500 – $18,700

Wood siding installation typically costs $8,500 – $18,700 for natural wood or cedar siding on a 2,000-square-foot home, with about $13,600 the figure most jobs land near — Angi averages $13,600 with most at $8,500–$18,700 at $5–$11 per square foot installed for cedar, HomeGuide prices cedar at $6–$16 per square foot installed or $15,000–$40,000 for a 2,500-square-foot house, and This Old House averages about $29,250 at roughly $11.70 per square foot. This Old House's higher average is published as its larger, all-in scope rather than averaged away — this page's typical band follows Angi's 2,000-square-foot-home band. The boards, trim, stain or seal, house wrap and labor below are all inside the total for a standard clapboard or shiplap job, while premium species and shake styles — Angi prices shakes at $7–$11 per square foot — and the recurring restaining are tiered and published separately.

Yellow house with horizontal lap siding and teal shutters

Aluminum Siding Installation Cost

$6,000 – $14,500

Aluminum siding installation typically costs $6,000 – $14,500 for a standard job on a 2,000-square-foot home, with about $11,750 the figure most jobs land near — Angi's aluminum siding guide, updated July 9, 2026, averages about $11,750 with an overall range of $4,500–$19,000 and prices corrugated aluminum at $3–$7 per square foot against $14–$18 for longboard, and its size table puts a 2,000-square-foot home at $6,000–$14,500; HomeGuide prices aluminum at $6–$10 per sq ft installed, or $15,000–$25,000 for a 2,500-square-foot house; and This Old House, using Homewyse data, prices aluminum at $7.32 per sq ft installed with a 2,000-square-foot home averaging $14,649. HomeGuide's and This Old House's higher totals are published as their larger-house, all-in scope rather than averaged away — this page's typical band follows Angi's 2,000-square-foot-home band. The panels, trim, house wrap and labor below are all inside the total for a standard corrugated or horizontal job, while longboard profiles — Angi prices them at $14–$18 per square foot — and old-siding removal are tiered and published separately.

Houses in Reykjavik clad in corrugated metal siding in black and green, with scaffolding in front of one house

Metal Siding Installation Cost

$9,000 – $19,500

$11,341 is Angi's published national average (updated Oct 16, 2026, 194 verified projects) — NOT a derived midpoint. Most homeowners pay $9,000–$19,500; at $4–$16 per sq ft installed for steel and aluminum. Fixr publishes a higher $17,000 editorial average with no stated methodology — carried as a note, never as the average. Prices are per square foot of exterior WALL area, not floor area.

Row houses with pastel painted plaster facades

Stucco Siding Installation Cost

$2,200 – $9,100

Stucco siding installation typically costs $2,200 – $9,100 for a standard job, with about $5,700 the figure most jobs land near — Angi's stucco guide, updated July 9, 2026, averages about $5,700 with most homeowners paying $2,200–$9,100 at $7–$9 per sq ft installed, and prices traditional cement stucco at $6–$9 per square foot, synthetic EIFS at $7–$10 and one-coat systems at $5–$7; HomeGuide prices stucco at $7–$17 per sq ft installed, or $17,500–$42,500 for a 2,500-square-foot house; and This Old House, using Homewyse data, prices stucco at $9.66 per sq ft installed with a 2,000-square-foot home averaging $19,320. HomeGuide's and This Old House's higher totals are published as their larger-house, all-in scope rather than averaged away — this page's typical band follows Angi's band. The cement, lath, mesh, coats and labor below are all inside the total for a standard traditional job, while synthetic EIFS systems — Angi prices them at $7–$10 per square foot — and moisture-barrier work in wet climates are tiered and published separately.

Brick-faced house with a covered porch

Brick Veneer Installation Cost

$12,000 – $36,000

Brick veneer installation typically costs $12,000 – $36,000 for full-size veneer on a 2,000-square-foot home, with about $26,000 the figure most jobs land near — Angi's brick siding guide, updated October 23, 2026, averages $26,000 for a 2,000-square-foot home with most homeowners paying $22,500–$70,000 at $9–$28 per sq ft installed, and prices thin brick veneer strips at $3–$10 per square foot for materials, faux brick panels at $6–$11 and face brick at $4–$8; HomeGuide prices thin brick at $8–$18 per sq ft installed, full-size brick veneer at $12–$18 and faux panels at $14–$24, with the front of a house running $2,000–$18,000 for 250–750 square feet; and Fixr averages $26,000 with most at $22,500–$50,000, pricing thin veneer at $8–$18, brick veneer at $12–$18 and solid brick at $14–$30 per square foot, and a 2,000-square-foot home at $12,000–$36,000 by wall area. Angi's wider most-pay band is published as its premium and solid-brick scope rather than averaged away — this page's typical band follows Fixr's wall-area band for full-size veneer. The brick, mortar, ties, flashing and masonry labor below are all inside the total for a standard full-size veneer job, while thin-brick front-only work — HomeGuide prices it from $2,000 for 250 square feet — and foundation shelf modifications are tiered and published separately.