Home › Cost Guides › Composite Decking Installation
Cost Guide

How Much Does a Composite Decking Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$12,000 – $24,000
Most homeowners pay around $18,000 · Composite decking installation typically costs $12,000 – $24,000 for about 300 square feet of full new build with a new substructure, with about $18,000 the figure most jobs land near — HomeGuide prices composite at $40–$80 per square foot installed including substructure, or $16,000–$32,000 for a 400-square-foot deck, while Angi, updated September 29, 2026, gives $5,400–$11,500 for a standard deck installation project with a national average of $8,500 and prices a pro build at $25–$54 per square foot; and EngineerFix prices a standard project at $25–$50 per square foot. EngineerFix's band is surface-only, excluding major structural changes, and Angi's is a lower-spec full build — the disagreement is published here as a scope split, not averaged away — and this page's typical band follows HomeGuide's full-build scope, with $18,000 the midpoint of that 300-square-foot band rather than a guide-stated average. The framing, boards, fasteners, labor, railing and permits below are all inside the total for a standard attached ground-level build, while demolition at $5–$15 per square foot in Angi and permits at $225–$500 are tiered and published separately.
typical
$12,000$24,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Lakeside deck with a wooden bench and metal chairs

Composite Decking Installation cost at a glance

  • Typical range: $12,000 – $24,000
  • Most homeowners pay: around $18,000
  • Prices vary most by: Installation labor (framing, laying, trimming) (30–45% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: Angi's composite decking cost guide, updated September 29, 2026 ($5,400–$11,500 for a standard deck installation project, national average $8,500; by type PVC $5–$15, mineral-based $6–$15, wood-plastic $10–$18 per square foot; demolition $5–$15 per square foot; permits $225–$500; demolition plus new installation $20–$47 per square foot; other Angi composite pages give materials $4–$12 per square foot with a pro build $25–$54, a 144 sq ft deck averaging $5,700 and a 360 sq ft deck averaging $8,500 with installation $15–$32 per square foot — different scopes, published separately, not conflated), HomeGuide's composite decking prices ($40–$80 per square foot installed including substructure; 20×20 ft / 400 sq ft $16,000–$32,000; materials $16–$32, labor $24–$48 per square foot; boards alone $4–$16 per square foot; ground-level/attached $40–$50, detached/floating $30–$40, elevated/attached $50–$80, second-story/attached $80–$100, multi-level $90–$130 per square foot installed; Trex $45–$70 installed — Enhance $45–$50, Select $55–$60, Transcend $65–$70, Trex boards $5–$15, Trex labor $27–$42 per square foot) and EngineerFix's composite decking per-square-foot guide (total installed $25–$50 per square foot for a standard project, excluding major structural changes; boards budget $3–$7, standard capped $5–$9 per square foot; board-installation labor $6–$12 per square foot; hidden fasteners add $1–$2 per square foot; its boards page gives basic $4–$9, mid-range capped $10–$16, premium $16–$32 per square foot for material alone, substructure $2–$5, board labor $10–$14, total $25–$45 per square foot) — EngineerFix's band is surface-only and Angi's $25–$54 is a lower-spec full build, published here as the scope disagreement, not averaged away; the page's typical band follows HomeGuide's full-build scope, and its $18,000 most-pay figure is the midpoint of that band, not a guide-stated average. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Composite Decking Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Detached or floating platform, about 200 square feet$6,000 – $8,000The cheap end: HomeGuide prices detached and floating decks at $30–$40 per square foot installed, or $6,000–$8,000 for 200 square feet — no house attachment, no tall structure, no stairs to price
Standard attached ground-level deck, about 300 square feet — the typical job$12,000 – $24,000The shared band itself: HomeGuide's $40–$80 per square foot installed including substructure, with its ground-level attached rate of $40–$50 inside it
Elevated, second-story or multi-level, about 300 square feet — the top end$15,000 – $30,000The expensive end: HomeGuide prices elevated attached decks at $50–$80 per square foot, or $15,000–$24,000 for 300 square feet, and second-story attached at $80–$100, or $24,000–$30,000 — height, structure and stairs are what push a deck here

Where the money goes

Part of the jobShareNote
Framing and substructure (joists, beams, footings)25–35% of totalThe structure: HomeGuide prices materials at $16–$32 per square foot with labor at $24–$48, and EngineerFix prices substructure alone at $2–$5 per square foot — a deck that needs new framing is a different job from a board swap, and the guides price it that way
Decking boards and hidden fasteners25–35% of totalThe surface: HomeGuide prices boards alone at $4–$16 per square foot, while EngineerFix prices basic boards at $4–$9, mid-range capped boards at $10–$16 and premium at $16–$32, with hidden fasteners adding $1–$2 per square foot — board tier alone can triple this line
Installation labor (framing, laying, trimming)30–45% of totalThe work: HomeGuide prices labor at $24–$48 per square foot and Trex labor at $27–$42, while EngineerFix prices board-installation labor at $6–$12 per square foot for the surface work alone — full-build labor is the bigger number because it includes the framing
Railing, stairs and permits10–20% of totalThe finish and the paperwork: Angi prices permits at $225–$500 and demolition at $5–$15 per square foot, and railing and stairs are priced with the build — a deck with long railing runs and wide stairs carries a visibly larger finish line
Framing and substructure (joists, beams, footings) · 25–35%Decking boards and hidden fasteners · 25–35%Installation labor (framing, laying, trimming) · 30–45%Railing, stairs and permits · 10–20%
Estimator’s note: on a composite decking installation, installation labor (framing, laying, trimming) is usually where quotes swing most (30–45% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A covered deck with railing and a swing: railing, stairs and permits sit in the 10–20% line of this guide's breakdown, on top of boards and framing
A covered deck with railing and a swing: railing, stairs and permits sit in the 10–20% line of this guide's breakdown, on top of boards and framing

What moves the price most

Board tier is the first fork. Budget boards at $3–$7 per square foot, standard capped boards at $5–$9 and premium at $16–$32 in EngineerFix are not the same product: capping is what resists fading and staining, and the guides tie price directly to how the board is finished. Structure scope is the second fork: EngineerFix's $25–$50 band excludes major structural changes, while HomeGuide's $40–$80 band includes a new substructure — a quote that reuses old framing and a quote that rebuilds it are not comparable totals. Height and levels are the third fork: HomeGuide prices ground-level attached decks at $40–$50, elevated at $50–$80, second-story at $80–$100 and multi-level at $90–$130 per square foot installed. Finally, brand tier matters inside the band: HomeGuide prices Trex at $45–$70 installed — Enhance $45–$50, Select $55–$60, Transcend $65–$70 — so two composite quotes for the same deck can differ by brand alone.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A covered deck with a hanging swing: an attached ground-level deck is the standard tier here — about 300 square feet at $12,000–$24,000 in this guide's typical band
A covered deck with a hanging swing: an attached ground-level deck is the standard tier here — about 300 square feet at $12,000–$24,000 in this guide's typical band

Frequently asked questions

How long does composite decking last?

Around 25 years per Angi's composite-versus-PVC guide — the planning figure the guides use, with capped boards at the longer end of the range and fading and staining, not rot, as the usual reason a board is replaced.

Does composite decking need staining or sealing?

No annual staining or sealing like wood — that is the material's main selling point in the guides. Capped boards resist fading and staining better than uncapped ones, which is part of what the board-tier price gap buys.

Why do composite quotes range from $25 to $80 per square foot?

Because they price different scopes: EngineerFix's $25–$50 band is surface work excluding major structural changes, Angi's $25–$54 is a lower-spec full build, and HomeGuide's $40–$80 includes a new substructure. Ask every bidder whether new framing is in the total before comparing rates.

Does composite decking get hot in the sun?

Yes — HomeGuide's rooftop-deck comparison names heat in direct sun as composite's drawback, and darker boards run hotter. Color choice and shade are practical decisions on a sun-exposed deck, not cosmetic ones.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Composite Decking Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Two-story house with white railings on its porch and upper balcony

Deck Railing Installation Cost

$1,500 – $3,500

Deck railing installation typically costs $1,500 – $3,500 for about 50 linear feet of standard wood, vinyl or composite railing on an existing sound deck, with about $2,500 the figure most jobs land near — Angi averages $2,500 inside its $400–$4,800 band, and HomeGuide prices wood at $20–$50, vinyl at $25–$60 and composite at $25–$60 per linear foot installed. Length is the multiplier and material is the ladder: the same 50 feet can cost $1,000 in wood or several times that in glass, which is published separately below rather than averaged in.

A wood-deck rooftop walkway with black metal railings and a glass canopy, overlooking hills

Rooftop Deck Installation Cost

$10,000 – $18,600

$11,250 is Angi's published national average (updated Oct 29, 2026) and $10,000–$18,600 is its 'most homeowners pay' band — the only published single average for rooftop decks. The headline band describes a standard small-to-medium deck (about 200 sq ft) on a roof already fit to carry it: Angi's own size table averages $12,000 for 200 sq ft but $23,000 for 400 sq ft and $35,000 for 600 sq ft, so bigger decks and roofs needing reinforcement cost more — the tiers below carry those jobs. A rooftop deck costs roughly 2–3× a ground-level deck of the same size: the premium is structural work, waterproofing, engineering and permits, not the boards (see our ground-level deck building guide for the contrast). Cost per square foot runs $25–$80 per sq ft installed by material (HomeGuide/Angi).

White picket fence with an arched gate in front of a two-story house

Fence Installation Cost

$2,800 – $5,500

Typical backyard fence of about 150 linear feet in wood or vinyl, installed — about $15 – $45 per linear foot installed

A white solid-panel backyard fence with climbing plants

Vinyl Fence Installation Cost

$3,500 – $7,500

Vinyl fence installation typically costs $3,500 – $7,500 for 150 linear feet of 6-foot privacy fence, installed, at about $30–$60 per linear foot, with about $5,000 the figure most jobs land near — Fixr prices most jobs at $5,000 for 150 linear feet of 6-foot fencing, HomeGuide prices 200 linear feet at $6,000–$12,000, and Angi averages $4,164 across 5,504 verified projects with most at $2,340–$6,000. A picket or 3-rail vinyl fence lands below the band, and an 8-foot or premium privacy fence with gates runs above it, while the panels, labor, posts, hardware and permits below are all inside the total.

Close-up of a chain-link fence against a clear blue sky

Chain-Link Fence Installation Cost

$1,300 – $3,600

Chain-link fence installation typically costs $1,300 – $3,600 for a standard residential run of about 150 linear feet, at about $10–$25 per linear foot installed, with about $2,400 the figure most jobs land near — Angi averages $2,420 across 3,993 verified projects with most at $1,297–$3,588, HomeGuide prices 150 feet at $1,500–$6,000 at $10–$40 per linear foot, and Fixr prices 100 linear feet of 11-gauge galvanized fence at $1,489–$2,771. A short 4-foot galvanized run lands below the band, and a taller vinyl-coated fence with gates runs above it, while the mesh, posts, rails, labor, gates and permits below are all inside the total.

Tall vertical-board wooden fence with pointed tops

Wood Fence Installation Cost

$3,750 – $5,500

Wood fence installation typically costs $3,750 – $5,500 for 150 linear feet of 6-foot wood privacy fence, at about $25–$37 per linear foot installed, with about $4,500 the figure most jobs land near — HomeGuide prices a 6-foot wood privacy fence at $25–$50 per linear foot, Fixr prices a wood privacy fence at $17–$37 installed with an average job of $4,500, and Angi averages $3,312 across all wood fence styles with most at $1,919–$4,948. A picket or split-rail fence lands below the band, and cedar or redwood with gates and stain runs above it, while the lumber, posts, labor, gates and finish below are all inside the total.