Fiber Cement Siding Installation cost at a glance
- Typical range: $6,600 – $23,200
- Most homeowners pay: around $14,900
- Prices vary most by: Installation labor (heavy boards, special cutting) (20–70% of the budget)
Cross-checked against four published sources for this project. Sources used for this page: Angi's fiber cement siding cost guide, updated September 14, 2026 (national average $14,901 across 2,297 verified projects, most $6,583–$23,219; $7–$18 per square foot installed, average $12.50; lap $4–$14, shingles $5–$14, panels $6–$18 per square foot; labor $2–$8 per square foot, 20–70% of the total), HomeGuide's house siding cost guide (fiber cement $6–$15 per square foot installed, $15,000–$37,500 for a 2,500-square-foot house; fiber cement repair $4–$12 per square foot) and Fixr's fiber cement siding installation cost guide (national average $15,000, most $8,000–$26,600; $5–$14 per square foot installed; 1,500-square-foot home typically $8,000–$25,200). The 2025 Cost vs. Value report's factory-finished fiber cement figure ($21,485 for 1,250 square feet, trim included, as reported in the Ledger and Lumber siding guide) is published as a prefinished benchmark, not averaged into the field-painted bands. Sources last checked: October 2026 — HomeGuide, Fixr, Angi, Cost vs. Value. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Small home or partial re-side, lap style | $1,500 – $8,000 | The cheap end: Angi prices lap-style fiber cement on a small 800-square-foot home from $1,500, and Fixr's band starts at $8,000 for a small full job — one or two elevations rather than a whole house |
| Standard full house, lap boards — the typical job | $6,600 – $23,200 | The shared band itself: Angi averages $14,901 for this scope at $7–$18 per square foot, Fixr averages $15,000 with most at $8,000–$26,600, and HomeGuide's $6–$15 band overlaps it |
| Panels or prefinished, large or complex house — the top end | $20,000 – $40,000 | The expensive end: Angi prices panel-style fiber cement up to $40,000 on a larger house, HomeGuide runs a 2,500-square-foot house to $37,500, and the 2025 Cost vs. Value report prices 1,250 square feet factory-finished at $21,485 with trim |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Fiber cement boards, panels or shingles | 35–50% of total | The material: Angi prices lap at $4–$14, shingles at $5–$14 and panels at $6–$18 per square foot installed — style is the ladder inside this line, and panels cost more per square foot than lap before labor |
| Installation labor (heavy boards, special cutting) | 20–70% of total | The fitting: Angi prices fiber cement labor at $2–$8 per square foot and 20–70% of the total depending on style — the boards are heavy, need two-person handling and diamond-blade cutting, which is why labor's share swings wider here than for vinyl |
| Trim, flashing, house wrap and caulk or paint | 10–20% of total | The system: trim, flashing and house wrap are priced with the boards, and field-painted jobs add a paint step — Angi's city guides price siding painting around $2.26–$4.19 per square foot, which prefinished boards avoid |
| Old-siding removal and wall preparation | 5–15% of total | The prep: Angi's city guides price fiber cement removal around $0.50–$1.25 per square foot, and sheathing repair underneath is condition-priced before the first board goes on |

What moves the price most
Style is the first driver: Angi prices lap at $4–$14, shingles at $5–$14 and panels at $6–$18 per square foot installed — the same walls in panels cost roughly twice what they cost in lap. Prefinished versus field-painted is second: factory-finished boards cost more per square foot but skip the paint step, and the 2025 Cost vs. Value report's $21,485 for 1,250 square feet factory-finished with trim is the prefinished benchmark. Weight and handling are third: fiber cement is far heavier than vinyl, so two-person crews, special blades and slower cutting are built into Angi's $2–$8 per square foot labor band. Finally, house size and height matter as usual: wall area times style rate is the total, and second-story work adds setup time per square foot.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does fiber cement siding cost per square foot installed?
Typically $7–$18 per square foot installed in Angi's national guide (average $12.50), $6–$15 in HomeGuide's guide and $5–$14 in Fixr's — the overlap band of $7–$15 is the planning figure for standard lap.
How much does a full fiber cement siding job cost?
Typically $6,600–$23,200, most near $14,900 — Angi averages $14,901 with most at $6,583–$23,219, and Fixr averages $15,000 with most at $8,000–$26,600.
Is fiber cement siding lap, panels or shingles — which costs most?
Panels cost most: Angi prices panels at $6–$18 per square foot installed, shingles at $5–$14 and lap at $4–$14 — lap is the standard, lowest-cost profile.
Does fiber cement siding need painting?
Field-painted boards do, and repainting is a recurring cost — Angi's city guides price siding painting around $2.26–$4.19 per square foot; factory-finished boards arrive coloured and skip that step.
How long does fiber cement siding last?
HomeGuide's material table gives fiber cement a 50–75-year lifespan, the longest of the common sidings — its weight and fire resistance are what the premium over vinyl buys.






