Home › Cost Guides › Wood Siding Installation
Cost Guide

How Much Does a Wood Siding Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$8,500 – $18,700
Most homeowners pay around $13,600 · Wood siding installation typically costs $8,500 – $18,700 for natural wood or cedar siding on a 2,000-square-foot home, with about $13,600 the figure most jobs land near — Angi averages $13,600 with most at $8,500–$18,700 at $5–$11 per square foot installed for cedar, HomeGuide prices cedar at $6–$16 per square foot installed or $15,000–$40,000 for a 2,500-square-foot house, and This Old House averages about $29,250 at roughly $11.70 per square foot. This Old House's higher average is published as its larger, all-in scope rather than averaged away — this page's typical band follows Angi's 2,000-square-foot-home band. The boards, trim, stain or seal, house wrap and labor below are all inside the total for a standard clapboard or shiplap job, while premium species and shake styles — Angi prices shakes at $7–$11 per square foot — and the recurring restaining are tiered and published separately.
typical
$8,500$18,700
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Modern house with warm wood cladding at sunset

Wood Siding Installation cost at a glance

  • Typical range: $8,500 – $18,700
  • Most homeowners pay: around $13,600
  • Prices vary most by: Wood boards (species and grade) (35–50% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's cedar siding cost guide, updated October 26, 2026 (national average $13,600 for a 2,000-square-foot home, most $8,500–$18,700; $5–$11 per square foot; species western $3–$5, eastern $5–$8, Spanish $6–$10, Alaskan yellow $9–$11; styles clapboard $5–$7, shiplap $5–$6, tongue-and-groove $5–$7, board-and-batten $6–$10, shakes/shingles $7–$11), HomeGuide's house siding cost guide (cedar $6–$16 per square foot installed, $15,000–$40,000 for a 2,500-square-foot house; log/wood $5–$15) and This Old House's cedar siding cost guide (average about $29,250, roughly $11.70 per square foot, total range $1,170–$64,350; labor 25–50% of the total, $1,500–$7,500 for a 1,500-square-foot home). This Old House's higher average is published as its larger/all-in scope, not averaged away — this page's typical band follows Angi's 2,000-square-foot-home band. Sources last checked: October 2026 — This Old House, HomeGuide, Angi. How we calculate these costs

Cost by scope

Wood Siding Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Front-only or small home, western cedar clapboard$3,200 – $7,100The cheap end: Angi prices the front of a 2,000-square-foot home at $3,200–$7,100, and western cedar — its cheapest species at $3–$5 per square foot — is what that end is built from
Standard full home, cedar clapboard or shiplap — the typical job$8,500 – $18,700The shared band itself: Angi averages $13,600 for this scope at $5–$11 per square foot, and HomeGuide's $6–$16 cedar band overlaps it
Premium species, shakes or board-and-batten, large home — the top end$18,700 – $40,000The expensive end: Angi prices board-and-batten at $6–$10 and shakes at $7–$11 per square foot with Alaskan yellow cedar at $9–$11, and HomeGuide runs a 2,500-square-foot cedar house to $40,000

Where the money goes

Part of the jobShareNote
Wood boards (species and grade)35–50% of totalThe boards: Angi prices cedar species at $3–$5 per square foot for western, $5–$8 for eastern, $6–$10 for Spanish and $9–$11 for Alaskan yellow — species alone can triple the material line
Installation labor (fitting, nailing, detailing)25–50% of totalThe fitting: This Old House puts labor at 25–50% of a cedar job, $1,500–$7,500 for a 1,500-square-foot home — boards are fitted one by one, and corners, trim and window detailing are hand work
Trim, stain or seal, fasteners and house wrap10–20% of totalThe finish: trim boards, a stain or seal coat, stainless or coated fasteners and house wrap are priced with the boards, and the first stain coat is part of the install, not the maintenance cycle
Old-siding removal and wall preparation5–15% of totalThe prep: removal and sheathing repair are condition-priced, and wood goes on only over sound, dry sheathing — a quote that skips the wall check underneath is not yet a complete quote
Wood boards (species and grade) · 35–50%Installation labor (fitting, nailing, detailing) · 25–50%Trim, stain or seal, fasteners and house wrap · 10–20%Old-siding removal and wall preparation · 5–15%
Estimator’s note: on a wood siding installation, wood boards (species and grade) is usually where quotes swing most (35–50% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A wooden house with stone accents and a porch: species and style set the material line — Angi prices western cedar at $3–$5 per square foot against $9–$11 for Alaskan yellow
A wooden house with stone accents and a porch: species and style set the material line — Angi prices western cedar at $3–$5 per square foot against $9–$11 for Alaskan yellow

What moves the price most

Species is the first driver: Angi prices western cedar at $3–$5 per square foot against $9–$11 for Alaskan yellow — the same walls in a premium species cost roughly three times the material. Style is second: Angi prices clapboard at $5–$7, shiplap at $5–$6, tongue-and-groove at $5–$7, board-and-batten at $6–$10 and shakes at $7–$11 per square foot installed. Maintenance is the third, recurring driver: cedar needs restaining or repainting every 5–10 years depending on exposure — This Old House notes cedar clapboards may need repainting every 7–10 years — so the install price is not the lifetime price. Finally, grade and exposure matter: clear-grade boards and harsh sun or wet exposures push both the install grade and the maintenance interval.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Wood lap boards in close view: boards, not sheets, are what a wood quote counts — and the finish on them is recurring cost, with restaining every 5–10 years
Wood lap boards in close view: boards, not sheets, are what a wood quote counts — and the finish on them is recurring cost, with restaining every 5–10 years

Frequently asked questions

How much does wood siding cost per square foot installed?

Typically $5–$11 per square foot installed for cedar in Angi's guide, $6–$16 in HomeGuide's and about $11.70 on average in This Old House's — the planning band for standard cedar clapboard is $5–$11.

How much does wood siding cost for a whole house?

Typically $8,500–$18,700 for a 2,000-square-foot home, most near $13,600 — Angi averages $13,600 with most at $8,500–$18,700; HomeGuide runs a 2,500-square-foot cedar house at $15,000–$40,000.

Which wood species is cheapest for siding?

Western cedar, at $3–$5 per square foot in Angi's species table, against $5–$8 for eastern cedar, $6–$10 for Spanish cedar and $9–$11 for Alaskan yellow.

How long does wood siding last?

Angi's and HomeGuide's material tables both give cedar a 20–40-year lifespan — but only with its maintenance cycle kept up; neglected wood fails far sooner.

How often does wood siding need repainting or restaining?

Every 5–10 years depending on exposure: one guide puts cedar restaining at every 5–7 years, and This Old House notes cedar clapboards may need repainting every 7–10 years with some sanding.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Wood Siding Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Yellow house with horizontal lap siding and teal shutters

Aluminum Siding Installation Cost

$6,000 – $14,500

Aluminum siding installation typically costs $6,000 – $14,500 for a standard job on a 2,000-square-foot home, with about $11,750 the figure most jobs land near — Angi's aluminum siding guide, updated July 9, 2026, averages about $11,750 with an overall range of $4,500–$19,000 and prices corrugated aluminum at $3–$7 per square foot against $14–$18 for longboard, and its size table puts a 2,000-square-foot home at $6,000–$14,500; HomeGuide prices aluminum at $6–$10 per sq ft installed, or $15,000–$25,000 for a 2,500-square-foot house; and This Old House, using Homewyse data, prices aluminum at $7.32 per sq ft installed with a 2,000-square-foot home averaging $14,649. HomeGuide's and This Old House's higher totals are published as their larger-house, all-in scope rather than averaged away — this page's typical band follows Angi's 2,000-square-foot-home band. The panels, trim, house wrap and labor below are all inside the total for a standard corrugated or horizontal job, while longboard profiles — Angi prices them at $14–$18 per square foot — and old-siding removal are tiered and published separately.

Houses in Reykjavik clad in corrugated metal siding in black and green, with scaffolding in front of one house

Metal Siding Installation Cost

$9,000 – $19,500

$11,341 is Angi's published national average (updated Oct 16, 2026, 194 verified projects) — NOT a derived midpoint. Most homeowners pay $9,000–$19,500; at $4–$16 per sq ft installed for steel and aluminum. Fixr publishes a higher $17,000 editorial average with no stated methodology — carried as a note, never as the average. Prices are per square foot of exterior WALL area, not floor area.

Row houses with pastel painted plaster facades

Stucco Siding Installation Cost

$2,200 – $9,100

Stucco siding installation typically costs $2,200 – $9,100 for a standard job, with about $5,700 the figure most jobs land near — Angi's stucco guide, updated July 9, 2026, averages about $5,700 with most homeowners paying $2,200–$9,100 at $7–$9 per sq ft installed, and prices traditional cement stucco at $6–$9 per square foot, synthetic EIFS at $7–$10 and one-coat systems at $5–$7; HomeGuide prices stucco at $7–$17 per sq ft installed, or $17,500–$42,500 for a 2,500-square-foot house; and This Old House, using Homewyse data, prices stucco at $9.66 per sq ft installed with a 2,000-square-foot home averaging $19,320. HomeGuide's and This Old House's higher totals are published as their larger-house, all-in scope rather than averaged away — this page's typical band follows Angi's band. The cement, lath, mesh, coats and labor below are all inside the total for a standard traditional job, while synthetic EIFS systems — Angi prices them at $7–$10 per square foot — and moisture-barrier work in wet climates are tiered and published separately.

Brick-faced house with a covered porch

Brick Veneer Installation Cost

$12,000 – $36,000

Brick veneer installation typically costs $12,000 – $36,000 for full-size veneer on a 2,000-square-foot home, with about $26,000 the figure most jobs land near — Angi's brick siding guide, updated October 23, 2026, averages $26,000 for a 2,000-square-foot home with most homeowners paying $22,500–$70,000 at $9–$28 per sq ft installed, and prices thin brick veneer strips at $3–$10 per square foot for materials, faux brick panels at $6–$11 and face brick at $4–$8; HomeGuide prices thin brick at $8–$18 per sq ft installed, full-size brick veneer at $12–$18 and faux panels at $14–$24, with the front of a house running $2,000–$18,000 for 250–750 square feet; and Fixr averages $26,000 with most at $22,500–$50,000, pricing thin veneer at $8–$18, brick veneer at $12–$18 and solid brick at $14–$30 per square foot, and a 2,000-square-foot home at $12,000–$36,000 by wall area. Angi's wider most-pay band is published as its premium and solid-brick scope rather than averaged away — this page's typical band follows Fixr's wall-area band for full-size veneer. The brick, mortar, ties, flashing and masonry labor below are all inside the total for a standard full-size veneer job, while thin-brick front-only work — HomeGuide prices it from $2,000 for 250 square feet — and foundation shelf modifications are tiered and published separately.

Large stone-faced house with gardens

Stone Veneer Installation Cost

$13,000 – $22,000

Stone veneer installation typically costs $13,000 – $22,000 for 1,000 square feet of manufactured stone veneer on a house exterior, with about $16,000 the figure most jobs land near — Angi averages $16,000 with most at $13,000–$22,000 at $13–$22 per square foot installed, HomeGuide prices cultured stone at $10–$35 per square foot installed or $10,000–$35,000 for a house, and This Old House puts stone veneer material at $5–$20 per square foot with labor at $3–$12. The veneer, lath, scratch coat, mortar, labor, moisture barrier and wall preparation below are all inside the total for the stated coverage, while full-thickness natural stone — Angi prices natural stone material alone at about $42 per square foot — is a different, dearer job, tiered separately.

House with a spacious wooden deck and railing in the backyard

Deck Building Cost

$7,500 – $16,000

Typical professionally built deck of about 300 sq ft with railing and stairs — about $25 – $50 per sq ft installed