Home › Cost Guides › Stone Veneer Installation
Cost Guide

How Much Does a Stone Veneer Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$13,000 – $22,000
Most homeowners pay around $16,000 · Stone veneer installation typically costs $13,000 – $22,000 for 1,000 square feet of manufactured stone veneer on a house exterior, with about $16,000 the figure most jobs land near — Angi averages $16,000 with most at $13,000–$22,000 at $13–$22 per square foot installed, HomeGuide prices cultured stone at $10–$35 per square foot installed or $10,000–$35,000 for a house, and This Old House puts stone veneer material at $5–$20 per square foot with labor at $3–$12. The veneer, lath, scratch coat, mortar, labor, moisture barrier and wall preparation below are all inside the total for the stated coverage, while full-thickness natural stone — Angi prices natural stone material alone at about $42 per square foot — is a different, dearer job, tiered separately.
typical
$13,000$22,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Large stone-faced house with gardens

Stone Veneer Installation cost at a glance

  • Typical range: $13,000 – $22,000
  • Most homeowners pay: around $16,000
  • Prices vary most by: Veneer materials (flats, corners, trim) (40–55% of the budget)

Cross-checked against four published sources for this project. Sources used for this page: Angi's stone veneer siding guide, updated October 12, 2026 (average $16,000, most $13,000–$22,000 for 1,000 square feet; $13–$22 per square foot installed; material $11–$18, labor $2–$4 per square foot; mortarless veneer $6–$10 per square foot; underlayment $440–$520 per 1,000 square feet; natural stone material alone about $42 per square foot), HomeGuide's cultured stone and stone veneer guides (cultured stone $10–$35 per square foot installed, $10,000–$35,000 for a house; natural thin stone $15–$45 installed; 200-square-foot front $2,000–$9,000; manufactured-stone labor $6–$24 per square foot; old siding removal $0.70–$2.00+ per square foot) and This Old House's stone siding guide (stone veneer material $5–$20 per square foot, labor $3–$12; faux panels $3–$5 material; natural stone $5–$30 material; data sourced from Angi and Fixr as stated on that page). Sources last checked: October 2026 — This Old House, HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Stone Veneer Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Accent or partial front (about 200 square feet)$2,000 – $9,000The cheap end: HomeGuide prices a 200-square-foot front at $2,000–$9,000, and Angi prices mortarless veneer at $6–$10 per square foot — the entry, porch or gable accent rather than a full elevation
Manufactured veneer, 1,000 square feet — the typical job$13,000 – $22,000The shared band itself: Angi averages $16,000 for this scope at $13–$22 per square foot installed, and HomeGuide's cultured-stone band of $10–$35 per square foot contains it
Natural thin stone or full-front premium — the top end$20,000 – $45,000The expensive end: HomeGuide prices natural thin stone installed at $15–$45 per square foot, and full-front coverage in natural stone with corners, sills and trim is where the total leaves the manufactured band

Where the money goes

Part of the jobShareNote
Veneer materials (flats, corners, trim)40–55% of totalThe stone: Angi prices stone veneer material at $11–$18 per square foot, HomeGuide at $4–$20 for manufactured and $4–$21 for natural thin stone — corners and trim pieces cost more per piece than flats, and pattern complexity moves this line
Installation labor (setting, jointing)20–35% of totalThe setting: Angi prices siding-contractor labor at $2–$4 per square foot, while HomeGuide prices manufactured-stone labor at $6–$24 per square foot depending on flats versus panels — the spread is published, not averaged away
Lath, scratch coat, mortar and moisture barrier10–20% of totalThe system behind the stone: Angi prices underlayment at $440–$520 per 1,000 square feet plus a moisture barrier at $2–$4 per square foot, and veneer without its drainage plane is a failure waiting for rain
Wall preparation and old siding removal5–15% of totalThe prep: HomeGuide prices removing old siding at $0.70–$2.00+ per square foot, and uneven or damaged sheathing has to be corrected before the first stone is set
Veneer materials (flats, corners, trim) · 40–55%Installation labor (setting, jointing) · 20–35%Lath, scratch coat, mortar and moisture barrier · 10–20%Wall preparation and old siding removal · 5–15%
Estimator’s note: on a stone veneer installation, veneer materials (flats, corners, trim) is usually where quotes swing most (40–55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A stone corner and chimney: corners and openings take the most mason time — HomeGuide prices manufactured-stone labor at $6–$24 per square foot, flats against panels
A stone corner and chimney: corners and openings take the most mason time — HomeGuide prices manufactured-stone labor at $6–$24 per square foot, flats against panels

What moves the price most

Manufactured versus natural is the first driver: HomeGuide prices cultured stone installed at $10–$35 per square foot against $15–$45 for natural thin stone, and Angi's $13–$22 installed band is the manufactured middle. Coverage area is second: veneer is priced per square foot, so a full elevation costs multiples of a front accent — HomeGuide's 200-square-foot front at $2,000–$9,000 against its 1,000-square-foot full exterior at $15,000–$35,000 shows the scale. Corners, openings and height are third: corners, sills, lintels and second-story work take more mason time per square foot than flat wall, and Angi notes multi-story homes push labor rates higher. Finally, wall condition matters: removal, sheathing repair and the moisture barrier are priced before the stone, not after it.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A stacked stone wall in close view: the veneer look up close — Angi prices stone veneer material at $11–$18 per square foot before labor, and the wall prep underneath is priced separately
A stacked stone wall in close view: the veneer look up close — Angi prices stone veneer material at $11–$18 per square foot before labor, and the wall prep underneath is priced separately

Frequently asked questions

How much does stone veneer cost installed?

Typically $13,000–$22,000 for 1,000 square feet of manufactured stone veneer, most near $16,000 — Angi averages $16,000 at $13–$22 per square foot installed, and HomeGuide prices cultured stone at $10–$35 per square foot installed.

What is the difference between manufactured and natural stone veneer?

Manufactured veneer is concrete cast and colored to look like stone; natural veneer is real stone cut thin. HomeGuide prices manufactured installed at $10–$35 per square foot against $15–$45 for natural thin stone — natural costs more to source, cut and set, and weighs more per piece.

Is stone veneer the same as full stone siding?

No: veneer is a thin facing applied over sheathing with lath, scratch coat and a moisture barrier, while full stone is structural thickness. Angi prices natural stone material alone at about $42 per square foot, which is why full stone totals run far above veneer totals.

Does stone veneer need maintenance?

Little, but not none: joints and sealants should be inspected, and the drainage plane behind the veneer matters more than the face — water trapped behind veneer damages sheathing, so flashing and weeps are part of a good install, not extras.

Can stone veneer go over existing siding?

Sometimes, but the wall has to be prepared: HomeGuide prices old-siding removal at $0.70–$2.00+ per square foot, and veneer needs sound sheathing, lath and a moisture barrier underneath — a quote that skips prep is not yet a complete quote.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Stone Veneer Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

House with a spacious wooden deck and railing in the backyard

Deck Building Cost

$7,500 – $16,000

Typical professionally built deck of about 300 sq ft with railing and stairs — about $25 – $50 per sq ft installed

Covered boardwalk deck at night with recessed lights in the deck surface

Deck Lighting Installation Cost

$1,200 – $3,000

A professionally installed low-voltage system of about 10 fixtures on a standard deck — solar and string options priced separately below

Lakeside deck with a wooden bench and metal chairs

Composite Decking Installation Cost

$12,000 – $24,000

Composite decking installation typically costs $12,000 – $24,000 for about 300 square feet of full new build with a new substructure, with about $18,000 the figure most jobs land near — HomeGuide prices composite at $40–$80 per square foot installed including substructure, or $16,000–$32,000 for a 400-square-foot deck, while Angi, updated September 29, 2026, gives $5,400–$11,500 for a standard deck installation project with a national average of $8,500 and prices a pro build at $25–$54 per square foot; and EngineerFix prices a standard project at $25–$50 per square foot. EngineerFix's band is surface-only, excluding major structural changes, and Angi's is a lower-spec full build — the disagreement is published here as a scope split, not averaged away — and this page's typical band follows HomeGuide's full-build scope, with $18,000 the midpoint of that 300-square-foot band rather than a guide-stated average. The framing, boards, fasteners, labor, railing and permits below are all inside the total for a standard attached ground-level build, while demolition at $5–$15 per square foot in Angi and permits at $225–$500 are tiered and published separately.

Two-story house with white railings on its porch and upper balcony

Deck Railing Installation Cost

$1,500 – $3,500

Deck railing installation typically costs $1,500 – $3,500 for about 50 linear feet of standard wood, vinyl or composite railing on an existing sound deck, with about $2,500 the figure most jobs land near — Angi averages $2,500 inside its $400–$4,800 band, and HomeGuide prices wood at $20–$50, vinyl at $25–$60 and composite at $25–$60 per linear foot installed. Length is the multiplier and material is the ladder: the same 50 feet can cost $1,000 in wood or several times that in glass, which is published separately below rather than averaged in.

A wood-deck rooftop walkway with black metal railings and a glass canopy, overlooking hills

Rooftop Deck Installation Cost

$10,000 – $18,600

$11,250 is Angi's published national average (updated Oct 29, 2026) and $10,000–$18,600 is its 'most homeowners pay' band — the only published single average for rooftop decks. The headline band describes a standard small-to-medium deck (about 200 sq ft) on a roof already fit to carry it: Angi's own size table averages $12,000 for 200 sq ft but $23,000 for 400 sq ft and $35,000 for 600 sq ft, so bigger decks and roofs needing reinforcement cost more — the tiers below carry those jobs. A rooftop deck costs roughly 2–3× a ground-level deck of the same size: the premium is structural work, waterproofing, engineering and permits, not the boards (see our ground-level deck building guide for the contrast). Cost per square foot runs $25–$80 per sq ft installed by material (HomeGuide/Angi).

White picket fence with an arched gate in front of a two-story house

Fence Installation Cost

$2,800 – $5,500

Typical backyard fence of about 150 linear feet in wood or vinyl, installed — about $15 – $45 per linear foot installed