Deck Lighting Installation cost at a glance
- Typical range: $1,200 – $3,000
- Most homeowners pay: around $2,000
- Prices vary most by: Installation labor (30–45% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Angi's landscape lighting cost guide, updated October 29, 2026 (deck/patio fixtures $125–$300 installed; full landscape system $2,000–$6,000; labor $50–$100 an hour; permits $150–$300), Homewyse's low-voltage deck lighting cost data, May 2026 ($298–$481 per light installed; fixture $26–$63; labor 1.1 hours, $104–$162) and DecksDirect's deck lighting cost guide (low-voltage fixture materials $30–$150 each; professional labor $400–$1,800; mid-range professional install about $1,500; small deck in solar $300–$900). Synthesized typical = Angi's 10-fixture math overlapped with DecksDirect's professional install band, with $2,000 most-pay inside that overlap; Homewyse's per-light band is published as the premium tier evidence. Checked November 2026.. Sources last checked: October 2026 — Angi, Homewyse. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Solar / string lights, DIY | $300 – $900 | The budget tier: solar post caps and string lights with no wiring and no electrician. DecksDirect prices a small deck in solar at $300–$900, and Arte Verde prices a DIY 10-fixture setup at $100–$1,500. |
| Standard low-voltage wired system, ~10 fixtures | $1,200 – $3,000 | The typical project on this page. Angi prices deck/patio fixtures at $125–$300 installed, which puts 10 fixtures at $1,250–$3,000, and DecksDirect prices a mid-range professional install at about $1,500 before materials. |
| Premium / line-voltage + smart controls | $3,000 – $6,000 | Recessed and line-voltage fixtures with dimmers, zones and smart controls across a large deck. Homewyse prices low-voltage deck lights at $298–$481 per light installed, which puts 10 lights at $2,980–$4,810, and Angi's full landscape system band tops out at $6,000. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Fixtures | 25–40% of total | Post caps, step lights, recessed deck lights and rail lights. Angi prices deck/patio fixtures at $125–$300 installed; DecksDirect prices low-voltage fixture materials at $30–$150 each, with premium brass and smart fixtures above that. |
| Installation labor | 30–45% of total | Layout, cutting in recessed and step fixtures, running and concealing wire. DecksDirect prices professional labor at $400–$1,800 depending on size and complexity, and Angi prices landscape lighting labor at $50–$100 an hour. |
| Transformer + wiring + controls | 20–30% of total | The low-voltage transformer, wire runs, connectors and timer or smart controls. Larger decks need a bigger transformer and longer runs, and voltage drop on long runs is why pros upsize wire gauge. |
| Electrical work + permit (line-voltage jobs) | 5–15% of total | Low-voltage deck systems usually need no permit; line-voltage work does, and Angi prices landscape lighting permits at $150–$300. A new outdoor circuit or GFCI protection belongs in this share, not in the fixture count. |

What moves the price most
Fixture count is the first driver: deck lighting is priced per light, so a 6-light step-and-rail job and a 20-light full-deck system are different projects even on the same deck — count the posts, steps and rails before comparing quotes. Fixture type is second: solar caps and string lights are the budget tier, while recessed and line-voltage fixtures cost more in both hardware and cutting-in labor. Voltage is third: low-voltage systems are the standard wired choice and usually permit-free, while line-voltage work needs an electrician and a permit. This page prices deck-only systems; for a whole-yard system, see our landscape lighting guide, for the deck itself, see our deck building guide, and for the rails the lights mount on, see our deck railing guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does deck lighting cost per light?
Angi prices deck/patio fixtures at $125–$300 installed, and Homewyse prices a low-voltage deck light at $298–$481 per light installed including its share of labor and materials. The gap is fixture grade and scope: basic post caps sit low, recessed and line-voltage fixtures sit high.
How many lights does a deck need?
A standard deck typically takes about 10 fixtures — post caps, step lights and a few rail or recessed lights — which is the count behind this page's typical band. Small decks can be done with 4–6, large multi-level decks with 20+.
Do deck lights need an electrician?
Low-voltage systems are often installed by a lighting or deck contractor without an electrician, while line-voltage work and any new outdoor circuit need a licensed electrician and usually a permit — Angi prices those permits at $150–$300.
What is the cheapest way to light a deck?
Solar post caps and string lights, at $300–$900 for a small deck in DecksDirect's pricing, with no wiring and no labor bill. They are dimmer and shorter-lived than wired lights, which is the trade for the price.
Solar or wired deck lights — which is better?
Wired low-voltage wins on brightness, consistency and lifespan, and it is the system this page's typical band prices. Solar wins on price and simplicity, and suits a deck you light occasionally rather than nightly.






