Outdoor Security Lighting Installation cost at a glance
- Typical range: $250 – $500
- Most homeowners pay: around $425
- Prices vary most by: Electrician labor (40–55% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Angi's motion sensor light installation cost guide, updated October 29, 2026 (first-time installation $350–$500, national average $425; motion spotlight fixture $15–$65, about $200 installed; motion floodlight fixture $30–$400, $250–$600 installed; smart camera light fixture $100–$300, $200–$500 installed; electrician labor $50–$150 per hour; DIY battery or solar installation $150–$300; motion-sensor light replacement $75–$250), HomeGuide's landscape lighting cost guide (security and motion sensor lights $100–$500 per fixture installed) and Reolink's motion sensor security light guide (basic fixtures $20–$50 each, smart fixtures $50–$200 or more; professional electrician $50–$150 per hour). Synthesized typical = the hardwired motion-floodlight overlap at $250–$500, with $425 most-pay at Angi's published average. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Battery or solar motion light, no new wiring | $150 – $300 | Angi prices DIY battery-powered or solar-powered motion-sensor installation at $150–$300, saving roughly $50–$150 of labor against a pro job. |
| Standard hardwired motion floodlight | $350 – $500 | The typical project on this page. Angi prices first-time motion-sensor light installation at $350–$500 with a $425 average, and prices a motion floodlight at $250–$600 installed. |
| Smart camera light or two-light job | $500 – $1,000 | Angi prices a smart motion-sensor light with a built-in camera at $200–$500 installed per light, so a camera light plus a second fixture lands in this band by simple addition. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Fixture | 30–45% of total | Angi prices motion floodlight fixtures at $30–$400 and smart camera lights at $100–$300 before installation; HomeGuide prices security and motion lights at $100–$500 per fixture installed. |
| Electrician labor | 40–55% of total | Angi prices electrician labor at $50–$150 per hour for hardwired motion-sensor work, and Reolink gives the same $50–$150 per hour range. |
| Wiring, weatherproofing and sensor setup | 10–20% of total | The new cable run, weatherproof box and sensor aiming that separate a first-time install from a like-for-like swap — Angi flags fixture type, access and power source as the spread drivers. |

What moves the price most
Existing wiring is the first lever: Angi prices a motion-sensor light replacement at $75–$250 where the wiring already exists, against $350–$500 for a first-time installation — a new cable run is the line that moves a job between those bands. Fixture type is second: a motion spotlight comes out at roughly $200 installed in Angi's pricing, a floodlight at $250–$600, and a smart camera light at $200–$500. Worked example at the most-pay figure: a $150 fixture + $200 of electrician labor + $75 of wiring and weatherproofing = $425. For the wider exterior lighting plan around it, see our landscape lighting installation guide, for deck lighting on the same circuit, see our deck lighting installation guide, and for a camera on the same corner, see our security camera installation guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does outdoor security lighting installation cost?
Typically $250–$500 for one hardwired motion-sensor floodlight, with $425 the middle of that band; Angi's first-time installation average is $425 across its $350–$500 band.
Is a motion light cheaper than an always-on light?
To install, roughly the same fixture cost — but a motion light only runs when triggered, which is why Angi frames it as both a security and an energy-saving choice against a light left on all night.
Battery, solar or hardwired — which should I choose?
Battery or solar suits a spot with no nearby wiring at $150–$300 installed in Angi's DIY pricing; hardwired suits a permanent entry or driveway light, at $350–$500 first-time, because it never needs a battery swap or a solar charge.
Where should a security light go?
High enough to cover the approach and aimed down the path, not into a neighbour's windows — Angi flags access and mounting height as cost drivers, and a light aimed across a boundary is the commonest reason for a re-aim call-back.
Do I need an electrician for a motion-sensor light?
For any hardwired install, yes — Angi states that motion-sensor work involving electrical wiring should be handled by a licensed electrician, at $50–$150 per hour; battery and solar lights are the DIY end of the page.






