Home › Cost Guides › Security Camera Installation
Cost Guide

How Much Does a Security Camera Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$600 – $2,000
Most homeowners pay around $1,300 · Security camera installation typically costs $600 – $2,000 for a standard professionally installed system, with about $1,300 the figure most standard jobs land near — Angi prices professional installation at $590–$2,040 with a $1,288 average across 4,027 verified projects, and HomeGuide prices a 4-camera system at $500–$1,600 and an 8-camera system at $1,000–$2,500, while Wasserstein prices a single camera at $150–$500 and a 4–8 camera system at $600–$3,000. The $600–$2,000 typical band is the standard 4-camera overlap, and $1,300 is Angi's average rounded — a single wireless camera costs far less, and a large wired system with a recorder and long cable runs costs far more, while a monthly monitoring subscription is a recurring charge on top of the installation total, not inside it.
typical
$600$2,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Two outdoor bullet security cameras mounted on a pole against a clear blue sky

Security Camera Installation cost at a glance

  • Typical range: $600 – $2,000
  • Most homeowners pay: around $1,300
  • Prices vary most by: Installation labor (40–60% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: Angi's security camera installation cost guide (updated September 23, 2026: professional installation $590–$2,040, national average $1,288 across 4,027 verified projects; labor 50–70% of the total on wired installs; wired $150–$500 per camera; 4-camera CCTV $600–$1,600; add-ons like monitors and extra storage $150–$200), HomeGuide's security camera installation cost guide (4-camera system $500–$1,600, 8-camera system $1,000–$2,500; wired $150–$500 per camera, wireless $130–$400, wire-free $70–$350; labor $80–$200 per camera, wired $100–$200, wireless $80–$150; camera units $50–$350) and Wasserstein's security camera installation cost guide (wired $100–$500 per camera, wireless $50–$250; single camera $150–$500; 4–8 camera systems $600–$3,000; labor $50–$150 per hour or $80–$200 per camera). Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Security Camera Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Single camera or doorbell camera, wireless — the budget route$150 – $500The cheap end: Wasserstein prices a single installed camera at $150–$500, and HomeGuide prices wireless cameras at $130–$400 each installed — one camera over a door, on Wi-Fi, with app viewing and no recorder, which is why it prices far below a whole-home system
Standard 4-camera system — the typical job$600 – $2,000The shared band itself: Angi prices professional installation at $590–$2,040 with a $1,288 average, and HomeGuide prices a 4-camera system at $500–$1,600 — four cameras covering the main approaches, wired or wireless, with a recorder or cloud storage, which is the common job and the band this page is built on
Large wired system, 8 cameras and a recorder — the top end$2,000 – $3,500The expensive end: HomeGuide prices an 8-camera system at $1,000–$2,500 before premium cameras and long runs, and Wasserstein prices 4–8 camera systems up to $3,000 — a large home, wired PoE cameras, a network recorder with hard-drive storage and cameras at height or on outbuildings are what push a job past the standard band

Where the money goes

Part of the jobShareNote
Cameras30–45% of totalThe hardware you see: HomeGuide prices cameras at $50–$350 each, wired units at the higher end for resolution and weather sealing — resolution, night vision and pan-tilt-zoom are the features that move this line, and every extra camera adds a unit plus its install
Installation labor40–60% of totalThe largest line on a wired job: Angi puts labor at 50–70% of the total for wired installs, and HomeGuide prices labor at $80–$200 per camera — running cable through walls and attics, mounting at height and aiming each camera are the hours, and wireless cameras cut this line sharply
Recorder and storage10–20% of totalWhere the footage lives: a network or digital video recorder with a hard drive is bought once, while cloud storage is a monthly subscription — Angi budgets $150–$200 for add-ons like monitors and extra storage, and that choice decides whether this line is a purchase or a bill
Cabling, mounts and setup5–15% of totalThe small parts that add up: cable, connectors, mounts, a power supply or PoE switch and the configuration — aiming, motion zones, app setup and recording schedules — with long or difficult cable runs pushing this line toward the top of its band
Cameras · 30–45%Installation labor · 40–60%Recorder and storage · 10–20%Cabling, mounts and setup · 5–15%
Estimator’s note: on a security camera installation, installation labor is usually where quotes swing most (40–60% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Two cameras covering a building corner: HomeGuide prices a 4-camera system at $500–$1,600, and labor at $80–$200 per camera — camera count is the first price driver, before any feature upgrade
Two cameras covering a building corner: HomeGuide prices a 4-camera system at $500–$1,600, and labor at $80–$200 per camera — camera count is the first price driver, before any feature upgrade

What moves the price most

Camera count is the first driver: every guide prices by the camera, so a 4-camera system and an 8-camera system are different jobs, not the same job with extras — HomeGuide prices a 4-camera system at $500–$1,600 against $1,000–$2,500 for 8 cameras. Wired versus wireless is second: HomeGuide prices wired cameras at $150–$500 each installed against $130–$400 for wireless, because wired runs need cable pulled through walls and attics while wireless needs a strong Wi-Fi signal and power or batteries instead. Camera grade is third: resolution, night vision, weather sealing and pan-tilt-zoom move the per-camera price inside every guide's type tables, and outdoor cameras cost more than indoor ones in HomeGuide. Finally, height, access and storage decide the top end: cameras mounted high or on outbuildings need ladders and longer runs, and a local recorder is a one-time purchase while cloud storage is a monthly bill that Angi's add-on budget does not include.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
An indoor camera mounted high on a wall: HomeGuide prices wireless cameras at $130–$400 each installed against $150–$500 for wired, which is why a wireless indoor unit is the cheap end of this page's tiers
An indoor camera mounted high on a wall: HomeGuide prices wireless cameras at $130–$400 each installed against $150–$500 for wired, which is why a wireless indoor unit is the cheap end of this page's tiers

Frequently asked questions

How much does it cost to install security cameras?

Most standard professionally installed systems land in the $600–$2,000 band on this page, with a common middle around $1,300 — Angi's average. A single wireless camera can come in below that band, and a large wired system with a recorder usually lands above it.

How much does security camera installation cost per camera?

HomeGuide prices wired cameras at $150–$500 each installed and wireless cameras at $130–$400 each, with labor alone at $80–$200 per camera — so the per-camera figure already includes the mounting and setup, and the system total is roughly the per-camera figure times the camera count plus the recorder.

Are wired security cameras more expensive to install than wireless?

Yes, on installation: wired and PoE cameras need cable runs through walls, ceilings or attics, which is skilled, time-consuming work, while wireless cameras mount faster but depend on Wi-Fi strength and need power or regular battery charging — cheaper to install, less reliable where the signal is weak.

Do I need a recorder or a subscription?

One or the other, and the choice is a cost decision: a network or digital video recorder with a hard drive is bought once and keeps footage local, while cloud storage is a monthly subscription per camera — Angi budgets $150–$200 for add-ons like monitors and extra storage, on top of the installation total.

Can I install security cameras myself?

Wireless cameras, usually yes — mounting, Wi-Fi setup and app configuration are the standard DIY scope, and the saving is roughly HomeGuide's $80–$200 of labor per camera. Wired PoE cameras at height, long cable runs and recorder configuration are the work most owners hand to a professional, because a badly run cable is hard to fix after the walls are closed.

Is security camera installation different from a monitored security system?

Yes — this page prices cameras and their recording only. A monitored security system, priced on its own page, adds door and window sensors, a control panel and a monitoring centre that responds to alarms, and its monthly monitoring fee is a separate charge from anything on this page.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Security Camera Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Open-plan living room and kitchen joined by a wide cased opening, with wood floors

Load-Bearing Wall Removal Cost

$3,000 – $8,000

Removing a load-bearing wall typically costs $3,000 – $8,000 for a standard opening, with about $5,700 the figure most standard jobs land near — Angi prices removal at $5,700 on average with most homeowners spending $1,400–$10,000, EngineerFix prices removing the wall and installing a replacement beam at $1,300–$5,000 at roughly $450 per linear foot, and HomeAdvisor prices the same job at $500–$15,000 with a $3,000 average. The $3,000–$8,000 typical band is the standard single-opening overlap, and $5,700 is Angi's average — HomeAdvisor's lower average reflects smaller-scope jobs and is published here as the disagreement, not blended, while a multi-storey wall or a long steel span costs far more, and the engineer and permit fees below are mandatory on every job, not optional extras.

Pale blue sliding barn door with a black pull handle, partly open to a sitting room

Barn Door Installation Cost

$400 – $1,500

Barn door installation typically costs $400 – $1,500 for a standard single interior door, with about $1,000 the figure most standard jobs land near — HomeGuide prices a single installed barn door at $400–$1,400 and a double at $800–$2,800 with labor at $100–$1,000, Angi averages an interior barn door at $1,500 within $200–$2,500 and prices professional installation at $1,350–$5,000 per door including exterior work, and EngineerFix prices a mid-range installed door at $700–$1,700. The $400–$1,500 typical band is the standard single-door overlap, and $1,000 is its middle — Angi's higher professional band covers exterior and custom doors, published here as the scope difference, not blended, while a double door or a custom hardwood door costs far more.

Wall of white built-in bookshelves fitted around a doorway, filled with books

Built-In Bookshelves Installation Cost

$1,500 – $4,500

Built-in bookshelves typically cost $1,500 – $4,500 for a standard medium unit, with about $3,000 the figure most standard jobs land near — Angi's hiring guide prices professionally installed built-in bookshelves at $1,400–$4,800 with most homeowners spending around $3,000, Bob Vila prices the same work at $1,290–$4,420 with a national average of $2,853, and HomeGuide prices custom bookshelves at $150–$400 per linear foot in MDF, $150–$600 in plywood and $500–$1,200 in hardwood. The $1,500–$4,500 typical band is the medium-unit overlap, and $3,000 is Angi's most-spent figure, corroborated by Bob Vila's average — Angi's 2026 bookcase data averages a smaller $1,400 within $1,000–$2,000, published here as the smaller-scope band, not blended, while a large wall-to-wall hardwood library wall costs far more.

Pull-down wall bed lowered from fitted cabinetry with side shelving, mattress on a metal frame

Murphy Bed Installation Cost

$1,500 – $4,000

A Murphy bed typically costs $1,500 – $4,000 for a standard queen unit installed, with about $3,000 the figure most standard jobs land near — Angi prices professional Murphy bed installation at $1,000–$7,500 with a $3,000 average, Renuity, citing Angi's 2025 data, prices most installations at $2,000–$4,000 with a queen at $1,500–$4,000, and Lori Beds prices a basic prefab unit plus installation at $1,000–$3,000 with custom cabinetry builds at $3,500–$15,000 or more. The $1,500–$4,000 typical band is the popular queen overlap, and $3,000 is Angi's average — a basic twin can come in below it, and a custom desk-integrated or king unit costs far more, while the unit, mechanism and anchoring labor below are all inside the total.

Kitchen with a lit strip under gray wall cabinets over the counter and sink

Under-Cabinet Lighting Installation Cost

$250 – $700

Under-cabinet lighting installation typically costs $250 – $700 for a standard kitchen run, with about $400 the figure most standard jobs land near — Angi prices professional installation at $200–$800 with a $400 national average, and its length table prices an average 10–20 linear foot kitchen at $250–$700. EngineerFix prices a professional hardwired 10–15 foot run higher, at $500–$1,200, because that band assumes a licensed electrician concealing wiring and fitting a wall switch — it is published here as the hardwired-scope difference, not blended into the typical band. The $250–$700 typical band is Angi's average-kitchen band, and $400 is Angi's average — a plug-in strip can come in below it, and a large multi-run or smart-controlled kitchen costs far more, while the fixtures, labor and controls below are all inside the total.

Blue Ethernet cables plugged into a network switch

Ethernet Wiring Installation Cost

$600 – $2,000

Wiring a retrofit home network of four to eight Ethernet drops — Cat6 cable, wall jacks and plates, switch and patch panel, and testing included; new-construction rough-in and whole-home systems of ten or more drops priced separately