Home › Cost Guides › Mailbox Installation
Cost Guide

How Much Does a Mailbox Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$150 – $350
Most homeowners pay around $250 · Standard post-mounted curbside mailbox, new wood or metal post set in concrete, box included, professionally installed; a box-only swap and a brick column priced separately
typical
$150$350
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Classic galvanized steel curbside mailbox with its red flag raised

Mailbox Installation cost at a glance

  • Typical range: $150 – $350
  • Most homeowners pay: around $250
  • Prices vary most by: Labor: digging, setting and levelling (40–55% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's brick mailbox cost guide, updated September 25, 2026 (professional brick mailbox installation $825–$1,275, national average $1,050; permits $45–$145; pre-built brick $600–$1,100) and Angi's mailbox DIY guide (professional standard mailbox installation about $210 for labor and materials; handyperson $60–$125 per hour), HomeGuide's mailbox installation cost guide (standard mailbox with a plain wood or metal post $150–$350 on average, premium decorative $400–$600; labor $100–$400 for a 2–4 hour job; post $25–$250 — wood $25–$75, metal $40–$250; box $20–$500+; brick or stone materials $300–$1,500 with masonry labor $500–$1,200; USPS height 41–45 inches) and Thumbtack's 2026 mailbox installation cost guide (national average range $113–$305, low $57, high $767). Synthesized typical = HomeGuide's standard band, corroborated by Thumbtack and Angi's roughly $210 standard figure. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi, Thumbtack. How we calculate these costs

Cost by scope

Mailbox Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Box swap on a sound post$75 – $200New box bolted to the existing post where it is plumb and solid — no digging, no concrete, the cheapest route in every guide.
Standard new post and box$150 – $350The typical project on this page. HomeGuide prices a standard mailbox with a plain wood or metal post at $150–$350 including materials and labor, and Thumbtack puts the national average range at $113–$305.
Premium decorative or locking box$400 – $600HomeGuide prices a premium mailbox with a decorative post at $400–$600 — cast aluminum or designer boxes, locking models and address-number packages sit here; a brick or stone column is a separate masonry job.

Where the money goes

Part of the jobShareNote
Mailbox unit20–35% of totalHomeGuide prices boxes at $20–$500+; basic steel $20–$40, mid-range $50–$150, premium $300–$500+
Post and concrete footing15–25% of totalHomeGuide prices posts at $25–$250 — wood $25–$75, metal $40–$250, vinyl or composite $50–$200 — plus a bag or two of concrete
Labor: digging, setting and levelling40–55% of totalHomeGuide prices installation labor at $100–$400 for a 2–4 hour job; difficult ground adds $50–$200 or more
Old box removal and extras5–15% of totalRemoval is often charged separately, and house numbers, locks, solar lights and planters are the usual add-ons
Mailbox unit · 20–35%Post and concrete footing · 15–25%Labor: digging, setting and levelling · 40–55%Old box removal and extras · 5–15%
Estimator’s note: on a mailbox installation, labor: digging, setting and levelling is usually where quotes swing most (40–55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A row of post-mounted boxes — where the post is sound and plumb, a box-only swap lands in the $75–$200 tier instead of the full $150–$350 new-post job.
A row of post-mounted boxes — where the post is sound and plumb, a box-only swap lands in the $75–$200 tier instead of the full $150–$350 new-post job.

What moves the price most

Post condition is the first lever: a sound, plumb post turns the job into a $75–$200 box swap, while a rotted or leaning post means digging it out — concrete and all — and starting over at the standard tier. Box and post material is second: HomeGuide's spread runs from a $20 steel box on a $25 wood post to a $500+ premium box on a $250 metal post, and that choice alone spans most of the typical band. Ground is third: rocky or clay-heavy soil adds $50–$200 or more in HomeGuide's pricing, and a slope makes levelling slower. Worked example at the most-pay figure: a $75 box + a $50 post and concrete + $125 of labor = $250. A brick or stone column is a different job entirely: Angi averages $825–$1,275 installed, and HomeGuide prices the masonry materials alone at $300–$1,500 with mason labor at $500–$1,200. For the approach around the box, see our fence installation guide, for the gate it often sits beside, see our driveway gate installation guide, and for lighting the same approach, see our landscape lighting installation guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Wooden posts are HomeGuide's cheapest post tier at $25–$75, against $40–$250 for metal — the post choice is a small line, but rot and leaning posts are what turn a swap into a full replacement.
Wooden posts are HomeGuide's cheapest post tier at $25–$75, against $40–$250 for metal — the post choice is a small line, but rot and leaning posts are what turn a swap into a full replacement.

Frequently asked questions

How much does it cost to install a mailbox?

Typically $150–$350 for a standard post-mounted box with a new wood or metal post, with $250 the middle of that band — HomeGuide's standard band, corroborated by Thumbtack's $113–$305 national average range and Angi's roughly $210 professional figure for a standard install.

How high should a mailbox be installed?

The U.S. Postal Service requires the bottom of the box to sit 41 to 45 inches above the road surface, measured from the street level — not from the curb or sidewalk — so the carrier can reach it from the vehicle. Set the post back from the curb edge and check any local rule before you dig.

Do I need a permit to install a mailbox?

Usually not for a standard post-mounted box, though rules vary by municipality. Masonry columns are the exception — HomeGuide's brick guide prices their permits at $50–$135 — so check with the local building department before building a column.

Can I install a mailbox myself?

Yes, for a standard post job: dig the hole, set the post plumb in concrete, let it cure a day or two, then mount and level the box. Call 811 to mark underground utilities before you dig, and keep the finished height inside the 41–45 inch USPS band.

How much does a brick mailbox cost?

Angi averages $825–$1,275 installed for a professional brick mailbox, with $1,050 the national average; HomeGuide prices brick or stone materials alone at $300–$1,500 and mason labor at $500–$1,200, over 8 to 16+ hours of work. A pre-built column installed on a new pad is the cheaper masonry route.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Mailbox Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides