Home › Cost Guides › Landscape Edging Installation
Cost Guide

How Much Does a Landscape Edging Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$650 – $1,600
Most homeowners pay around $1,100 · Professionally installed landscape edging for a typical home's beds — roughly 100–180 linear feet in standard materials, trench, base and finish included; premium stone and stamped concrete priced separately
typical
$650$1,600
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Curved bed of red and yellow tulips edged with grey stone blocks beside a paved walkway

Landscape Edging Installation cost at a glance

  • Typical range: $650 – $1,600
  • Most homeowners pay: around $1,100
  • Prices vary most by: Installation labor (40–55% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's landscape curbing cost guide, updated September 28, 2026 (national average $1,460 from 1,108 verified projects; most pay $784–$2,162; installed curbing $15–$20 per linear foot, premium to about $50; granite $20–$33 per linear foot installed; Belgian block $9–$11 per foot; project examples: 30 ft bed $540, 75 ft driveway edging $1,350), HomeGuide's landscape curbing cost guide (national average $1,500, average range $400–$2,200 for 75–150 ft; materials only: plastic $0.50–$3.00, poured concrete $2.00–$7.00, precast $2.00–$4.00, stone $3.00–$18.00, granite $11.00–$16.00 per linear foot; labor $1.50–$10.00 per linear foot; poured concrete installed $3.50–$17.00, driveway edging $5–$18 per linear foot) and LawnStarter's 2026 landscape edging cost guide (average $3.50–$8.80 per linear foot installed; 180 ft $630–$1,584 professionally installed vs $340–$960 DIY; plastic material $1–$3.50, concrete precast $3–$5.50, poured $3–$8 per linear foot; labor $1.50–$10 per linear foot). Synthesized typical = the LawnStarter 180-foot band overlapped with Angi's most-pay band; $1,100 most-pay sits inside all three project bands. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi, LawnStarter. How we calculate these costs

Cost by scope

Landscape Edging Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget plastic or steel edging$350 – $900LawnStarter's per-foot band applied to a smaller run: plastic and light steel strip, the cheapest installed border.
Standard stone, brick or concrete edging$650 – $1,600The typical project on this page: LawnStarter's 180-foot band, inside Angi's and HomeGuide's project bands.
Premium granite or stamped concrete curbing$1,500 – $2,500+Angi's granite at $20–$33 per linear foot installed, and its most-pay band topping at $2,162 for continuous curbing.

Where the money goes

Part of the jobShareNote
Edging materials35–50% of totalHomeGuide material-only prices: plastic $0.50–$3.00, poured concrete $2.00–$7.00, stone $3.00–$18.00 and granite $11.00–$16.00 per linear foot
Installation labor40–55% of totalHomeGuide and LawnStarter price labor at $1.50–$10.00 per linear foot; Angi's installed curbing rate is $15–$20 per linear foot for continuous concrete
Trenching, base and grading prep5–15% of totalShaping the bed line, base material and drainage — the work that keeps the edge from heaving or wandering
Sealing, stamping or finishing3–10% of totalHomeGuide prices stamping at $0.50–$1.00 per linear foot; sealing and color add here
Edging materials · 35–50%Installation labor · 40–55%Trenching, base and grading prep · 5–15%Sealing, stamping or finishing · 3–10%
Estimator’s note: on a landscape edging installation, installation labor is usually where quotes swing most (40–55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A curved dark metal strip separating a succulent bed from gravel — steel edging bends to curves that stone cannot follow, and at LawnStarter's $3.50–$8.80 per linear foot installed, curves add labor before they add material.
A curved dark metal strip separating a succulent bed from gravel — steel edging bends to curves that stone cannot follow, and at LawnStarter's $3.50–$8.80 per linear foot installed, curves add labor before they add material.

What moves the price most

Linear footage is the first lever: LawnStarter prices 180 feet at $630–$1,584, and Angi's examples scale the same way — a 30-foot bed at $540 against 75 feet of driveway edging at $1,350 at about $18 per foot. Material is second: HomeGuide's material-only spread runs from plastic at $0.50–$3.00 per foot to granite at $11.00–$16.00 — the same border in two materials is a different project price. Curves and complexity are third: a straight run is the cheapest shape to install, while tight curves, corners and slopes add cutting and fitting time, especially in stone. DIY versus pro is fourth: LawnStarter prices a 180-foot DIY job at $340–$960 against $630–$1,584 professionally installed — plastic and steel strip are the DIY-friendly materials, while stone setting and continuous concrete curbing are crew work. Worked example at the most-pay figure: materials $450 + labor $550 + prep and finishing $100 = $1,100. For the beds the edging protects, see our mulch installation guide and our sod installation guide, and for the watering inside them see our sprinkler system installation guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A narrow bed of red flowers between two long brick edging strips — brick is HomeGuide's low-cost hard material band, and a straight run like this one is the cheapest shape to install.
A narrow bed of red flowers between two long brick edging strips — brick is HomeGuide's low-cost hard material band, and a straight run like this one is the cheapest shape to install.

Frequently asked questions

How much does landscape edging installation cost?

Typically $650–$1,600 for a professionally installed standard-material job of roughly 100–180 linear feet, with $1,100 the middle of that band — LawnStarter's 180-foot band overlapped with Angi's most-pay band.

How much does landscape edging cost per linear foot?

LawnStarter prices standard installed edging at $3.50–$8.80 per linear foot; Angi prices continuous concrete curbing at $15–$20 per linear foot installed, and granite curbing at $20–$33.

What is the cheapest landscape edging?

Plastic strip, at $0.50–$3.00 per linear foot in material alone (HomeGuide) — the budget tier on this page at $350–$900 installed. The trade-off is durability: plastic can heave in frost and crack in cold, where stone and steel hold their line.

Does edging stop grass from growing into beds?

That is its job: a properly set edge, buried to its recommended depth with a clean lawn-side cut, blocks most grass runners and holds mulch in the bed. It will not stop all weeds or deep-rooted invaders, and an edge left proud of the soil gets hit by the mower.

Can I install landscape edging myself?

Plastic and steel strip, yes — LawnStarter prices a 180-foot DIY job at $340–$960 against $630–$1,584 professionally installed. Stone setting and poured concrete curbing are crew work: the trench, base and levelling decide whether the line stays straight.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Landscape Edging Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides