Home › Cost Guides › Fireplace Insert Installation
Cost Guide

How Much Does a Fireplace Insert Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$2,000 – $5,500
Most homeowners pay around $3,600 · Fitting a sealed insert into an existing fireplace — gas or wood, unit and installation included; a new fireplace built from scratch priced separately
typical
$2,000$5,500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Living room with a lit black firebox insert under a white mantel

Fireplace Insert Installation cost at a glance

  • Typical range: $2,000 – $5,500
  • Most homeowners pay: around $3,600
  • Prices vary most by: Insert unit (45–60% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: Angi's fireplace insert cost guide, updated October 11, 2026 (national average $3,600, most $700–$6,500; gas $700–$1,000, electric $500–$2,000 and wood $1,000–$1,500 in its type table; labor $2,200 wood, $1,500 gas, $200 electric; gas or electric line connection and firebox repair $200–$1,000), HomeGuide's gas fireplace insert cost guide (standard gas insert $2,000–$5,000 installed, unit $1,500–$3,500 plus labor $500–$1,500; wood-burning insert $2,000–$5,500 installed; gas log insert $300–$2,000; new gas line $350–$2,000; electric fireplace insert $200–$2,000) and Bob Vila's gas fireplace insert cost guide (typical $700–$6,500, average $3,600; labor and materials $500–$1,500; direct-vent models $4,300–$11,200; unvented $1,500–$4,600). Synthesized typical = the gas/wood installed overlap, $2,000–$5,500, with Angi's $3,600 average as most-pay. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Fireplace Insert Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Electric insert$500 – $2,000A plug-in insert for an existing opening, with no vent or gas line. HomeGuide prices electric fireplace inserts at $200–$2,000 for the unit, with installation at the low end of the scale.
Standard gas or wood insert$2,000 – $5,500The typical project on this page. HomeGuide prices a standard gas insert at $2,000–$5,000 installed and a wood insert at $2,000–$5,500 installed; Angi's all-insert band is $700–$6,500 with a $3,600 average.
Premium direct-vent / large$5,500 – $11,200A large direct-vent gas insert or a premium unit with a new liner and surround work. Bob Vila prices direct-vent models at $4,300–$11,200.

Where the money goes

Part of the jobShareNote
Insert unit45–60% of totalThe sealed firebox, burner or grate, surround and trim. HomeGuide prices a standard gas unit at $1,500–$3,500 before installation.
Installation labor20–35% of totalFitting, sealing and testing the insert in the existing opening. HomeGuide prices gas-insert installation labor and materials at $500–$1,500, and Angi prices wood-insert labor at $2,200 against $1,500 for gas.
Venting / chimney liner10–25% of totalA liner for wood inserts and venting for direct-vent gas. Angi puts gas or electric line connection and firebox repair at $200–$1,000 on top of the insert itself.
Gas line / electrical work5–20% of totalOnly where the fuel needs it: a new gas run for gas inserts, a circuit or outlet for electric and pellet models. HomeGuide prices a new gas line at $350–$2,000.
Insert unit · 45–60%Installation labor · 20–35%Venting / chimney liner · 10–25%Gas line / electrical work · 5–20%
Estimator’s note: on a fireplace insert installation, insert unit is usually where quotes swing most (45–60% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Fire behind a sealed glass door — the sealed-box design that separates an insert from an open fireplace, and the reason a liner and proper venting sit in the breakdown.
Fire behind a sealed glass door — the sealed-box design that separates an insert from an open fireplace, and the reason a liner and proper venting sit in the breakdown.

What moves the price most

Fuel type is the first choice: gas inserts are the convenience option at $2,000–$5,000 installed in HomeGuide's pricing, while wood inserts at $2,000–$5,500 need a liner and regular sweeping. Condition of the existing fireplace is second: a firebox or chimney that needs repair adds Angi's $200–$1,000 for line connection and firebox repair before the insert goes in. Fit is third: the insert must match the opening — a unit too large for the firebox is not a job a trim kit fixes. For a fireplace built new, see our fireplace installation guide, for the liner a wood insert needs, see our chimney liner replacement guide, and for the gas run a gas insert needs, see our gas line installation guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
An unlit open brick fireplace with a fire screen — the starting point for an insert job, which Angi prices at $700–$6,500 across fuel types with a $3,600 average.
An unlit open brick fireplace with a fire screen — the starting point for an insert job, which Angi prices at $700–$6,500 across fuel types with a $3,600 average.

Frequently asked questions

How much does a fireplace insert cost?

A standard gas or wood insert typically runs $2,000–$5,500 installed, with $3,600 the middle of the wider picture — Angi's all-insert band is $700–$6,500 with a $3,600 average.

Gas or wood insert — which is better?

Gas wins on convenience: HomeGuide prices a standard gas insert at $2,000–$5,000 installed, with no wood to haul and no ash. Wood wins on a real fire and independence from gas, at $2,000–$5,500 installed, but it needs a liner and regular chimney sweeping.

Does an insert need a chimney liner?

A wood insert normally does — the liner carries smoke safely up the old chimney. A direct-vent gas insert vents through the chimney with its own venting, which is why vent type, not just fuel, sets the price.

Can an insert fit any existing fireplace?

Only if the opening fits the unit and the firebox and chimney pass inspection. Some factory-built fireplaces cannot take an insert at all, so the inspection comes before the order, not after.

How much does an electric insert cost?

HomeGuide prices electric fireplace inserts at $200–$2,000 for the unit, with little installation beyond an outlet — the cheapest tier on this page, and the right choice where there is no vent and no gas.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Fireplace Insert Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Ornate carved white fireplace mantel surround with firewood in the firebox

Fireplace Mantel Installation Cost

$1,200 – $4,500

Installing a full mantel with shelf and surround on an existing fireplace — mantel, installation and finishing included; a new fireplace, firebox or gas line priced separately

Living room with a lit fireplace, white sofas and a large TV above the white mantel

Fireplace Repair Cost

$200 – $1,000

Fireplace repair typically costs $200 – $1,000 for a standard repair, with about $600 the figure most standard jobs land near — Angi's national average is $614 inside its $185–$1,051 most-pay band, and HomeGuide prices fireplace repair at $100–$2,000. This guide prices repairs to an existing fireplace, not a remodel and not a chimney rebuild.

Bright living room with a lit brick fireplace, white mantel and TV above it, sofas, coffee table and rug

Fireplace Remodel Cost

$400 – $2,000

A standard fireplace remodel — refacing the surround of an existing fireplace with new material, refreshing the mantel and hearth, with no structural rebuild

Living room with a vaulted wood-plank ceiling and built-in shelving

Skylight Installation Cost

$1,500 – $2,800

The typical project is one standard fixed skylight cut into a sloped shingle roof, deck- or curb-mounted with the flashing kit made for that roof covering. Work that must cross an attic inside a framed and finished chase, and large or venting units, price above the band.

Circular skylight framing blue sky and clouds

Solar Tube Installation Cost

$600 – $1,000

Solar tube installation typically costs $600 – $1,000 for one standard tube, professionally installed, with about $850 the figure most jobs land near — HomeGuide's national average is $850 inside its $600–$1,000 band, and Angi prices installation at $600–$1,000. A solar tube — also called a sun tunnel or tubular skylight — is a roof dome, a reflective tube and a ceiling diffuser that pipes daylight into a windowless room, for roughly a third of a full skylight's price.

Entry hall with hardwood floors, a staircase and white baseboards along every wall

Baseboard Installation Cost

$900 – $1,500

The typical project is about 150 linear feet of standard painted baseboard across a few rooms — about $6–$9 per linear foot installed. Tall profiles, hardwood species, lots of corners and a separate painting bill are what push a trim job above the band.