Driveway Gate Installation cost at a glance
- Typical range: $2,400 – $8,000
- Most homeowners pay: around $4,000
- Prices vary most by: Gate panel, posts and hardware (30–45% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: Angi's automatic gate installation guide (updated September 17, 2026: national average $4,000, most $2,380–$8,000; standard gates 10–16 ft wide $500–$6,000; 10 ft $500–$3,000, 12 ft $1,000–$4,000, 16 ft $1,500–$6,000; permit fees $150–$300) and Angi's gate installation guide (updated October 1, 2026: national average $2,322, most $877–$3,814; automatic driveway gates $1,900–$6,000, up to $12,000 with advanced security; manual driveway gates $300–$1,200), HomeGuide's automatic driveway gate guide (automatic gates $1,600–$13,000 installed, most people spending about $7,000; electric gate $500–$5,000, opener $300–$5,000+, labor $800–$3,000 at $50–$100 per hour; automating an existing gate $400–$5,500; wrought iron gate materials $200–$650, single-car automatic swing with keypad $4,000–$6,000; brick pillars $500–$1,800, stone pillars $1,300–$3,000) and Fixr's driveway gate guide (national average $4,000 for an installed 12-by-6-foot automatic double wooden swinging gate, average range $1,000–$6,000; manual $700–$3,000, automatic $2,500–$5,000; custom automatic 16-by-8-foot aluminum gate with keypad and intercom up to $12,000; materials $200–$9,000 by size). Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Manual driveway gate — the budget route | $300 – $3,000 | The cheap end: Angi prices manual driveway gates at $300–$1,200 and Fixr prices manual gates at $700–$3,000 installed, against $200–$9,000 for gate materials alone by size — a hinged or sliding gate you open by hand, with posts and hardware but no motor, wiring or access controls, which is why it prices well below an automatic gate |
| Standard automatic driveway gate — the typical job | $2,400 – $8,000 | The shared band itself: Angi prices automatic gate installation at $2,380–$8,000 with a $4,000 average, Fixr prices automatic gates at $2,500–$5,000 installed, and HomeGuide prices an automatic driveway gate at $1,600–$13,000 with most people spending about $7,000 for gate, opener and installation — a standard 10–16-foot swing or sliding gate with a motor, remote or keypad entry and professional installation, which is the common job and the band this page is built on |
| Custom or security gate — the top end | $8,000 – $13,000 | The expensive end: HomeGuide prices automatic driveway gates up to $13,000 installed, Angi prices automatic driveway gates with advanced security features up to $12,000, and Fixr prices a custom automatic 16-by-8-foot aluminum swinging gate with keypad and intercom at up to $12,000 — a wide, heavy or ornamental gate with intercom, cameras, sensors and masonry pillars, where the automation and the pillars, not the gate panel alone, set the price |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Gate panel, posts and hardware | 30–45% of total | The gate itself: HomeGuide prices an electric gate at $500–$5,000 before the opener or installation, Fixr prices gate materials at $200–$9,000 by size, and HomeGuide prices brick pillars at $500–$1,800 each and natural stone pillars at $1,300–$3,000 — width, material and pillars move this line more than any other |
| Opener and automation — motor, keypad, sensors | 20–35% of total | The automation layer that separates an automatic gate from a manual one: HomeGuide prices a gate opener at $300–$5,000+, Fixr notes that automatic gates add a power source, motor and entry type with sensors, remotes or keypads, and Angi prices permit fees for automatic gates at $150–$300 — a basic remote opener sits at the bottom of that band, while intercoms, cameras and solar power sit at the top |
| Installation labor — concrete, wiring, alignment | 25–40% of total | HomeGuide prices installation labor at $800–$3,000+ at $50–$100 per hour, noting that a heavy gate, double swing or sliding panels, or advanced features take longer than a simple one-panel gate — concrete footings for the posts, electrical wiring and mechanical alignment are the skilled part of the job |
| Electrical, permits and extras | 5–15% of total | The paperwork and power layer: Angi prices permit fees at $150–$300 for automatic gates, HomeGuide notes that automating an existing gate alone costs $400–$5,500 for materials and installation, and Fixr prices a solar power package at $260–$800 — a gate far from the house panel or one needing a new circuit pushes this share up |

What moves the price most
Automation is the first driver: it is the single biggest fork in the price — Angi prices manual driveway gates at $300–$1,200 against $2,380–$8,000 for automatic installation, and Fixr prices manual gates at $700–$3,000 against $2,500–$5,000 for automatic, because a motor, power supply and access controls are a second system bolted onto the gate. Width is second: Angi prices standard residential gates at 10–16 feet wide, with a 10-foot gate at $500–$3,000, a 12-foot gate at $1,000–$4,000 and a 16-foot gate at $1,500–$6,000, and Fixr prices a 16-foot automatic gate at $1,100–$9,000 against $600–$7,000 for a 10-foot one — wider means heavier, which means a stronger motor and deeper footings. Swing versus sliding is third: Angi notes that swing gates need clear space to open while sliding gates suit limited driveways, and a sliding gate's track and frame usually add cost over a comparable swing gate. Finally, material and pillars decide the finish: HomeGuide prices wrought iron gate materials at $200–$650 and a single-car automatic swing gate with keypad at $4,000–$6,000, while brick pillars run $500–$1,800 each and stone pillars $1,300–$3,000 — pillars are the line most quotes bury, and they can add thousands before the gate itself is counted.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does it cost to install a driveway gate?
Most standard automatic driveway gates land in the $2,400–$8,000 band on this page, with a common middle around $4,000 — the average both Angi and Fixr publish. A manual gate can come in below that band, and a custom or security gate with intercoms and cameras usually lands above it.
How much more does an automatic gate cost than a manual gate?
Roughly three to eight times as much installed: Angi prices manual driveway gates at $300–$1,200 against $2,380–$8,000 for automatic installation, and Fixr prices manual gates at $700–$3,000 against $2,500–$5,000 for automatic. The motor, power supply, safety sensors and access controls are the difference — the gate panel itself is often the same.
Should I choose a swing gate or a sliding gate?
It depends on the driveway, not the budget alone: Angi notes that swing gates need clear space to open while sliding gates roll along the fence line and suit tight, sloping or short driveways. A sliding gate's track and heavier frame usually add cost over a comparable swing gate, and a sliding gate needs a clear run of fence line at least as long as the gate itself.
Do I need a permit for a driveway gate?
Often for an automatic gate, rarely for a simple manual one: Angi prices permit fees at $150–$300 for automatic gates, and notes that taller gates and gates over 6 feet can trigger fence-height rules. An automatic gate's electrical work is the part most jurisdictions want permitted and inspected.
How wide should a driveway gate be?
Angi prices standard residential gates at 10–16 feet wide: a 10-foot gate suits a single car, a 12-foot gate is the common driveway width, and a 14–16-foot gate suits two cars, trucks or RVs. Measure the widest vehicle that will use it, then add clearance — a gate that just fits the car is a gate you will scrape.






