Chimney Rebuild cost at a glance
- Typical range: $1,500 – $3,500
- Most homeowners pay: around $2,200
- Prices vary most by: Mason labor (45–60% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Angi's chimney replacement cost guide, updated October 2, 2026 (national average $9,300, most $3,100–$15,400; partial rebuild $1,500–$4,000; brick $60–$200 per linear foot; $40–$250 per linear foot overall), Angi's chimney repair cost guide, updated October 6, 2026 (stack rebuilding about $150 per linear foot for the sections actually rebuilt; section rebuild $1,000–$5,000; full replacement $10,000–$15,000) and HomeGuide's chimney rebuild cost guide (partial rebuild $600–$1,000; complete stack rebuild above the roofline $1,000–$3,500 at $100–$300 per linear foot; full replacement $4,000–$15,000; national average $2,200; average range $1,000–$5,000). Synthesized typical = the Angi partial band overlapped with HomeGuide's above-roofline band, with $2,200 most-pay at HomeGuide's national average. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Partial rebuild — top few feet or a small chimney | $600 – $1,000 | HomeGuide’s partial band: the damaged top courses only, where the rest of the stack is sound. |
| Standard above-roofline rebuild | $1,500 – $3,500 | The typical project on this page: Angi’s $1,500–$4,000 partial-rebuild band overlapped with HomeGuide’s $1,000–$3,500 above-roofline band. |
| Full chimney replacement | $4,000 – $15,000 | HomeGuide’s full-replacement band, inside Angi’s most-pay band of $3,100–$15,400: above and below the roofline, firebox included where it is rebuilt too. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Masonry materials (brick, mortar, crown) | 25–40% of total | Angi prices brick at $60–$200 per linear foot on average, and the mortar, crown mix and flashing sit in this share |
| Mason labor | 45–60% of total | Teardown, scaffolding and relaying brick by brick is crew time, and it is the largest share on most rebuilds |
| Crown, cap and flashing | 10–20% of total | A proper rebuild finishes with a new crown, cap and flashing — built into the job, not added as a later repair |
| Permits, scaffolding and disposal | 5–15% of total | Access equipment, debris removal and any permit the local code requires for structural masonry work |

What moves the price most
Height in linear feet is the first lever: HomeGuide prices a complete stack rebuild at $100–$300 per linear foot from the roof to the crown, and Angi prices rebuilding the stack at about $150 per linear foot for the sections actually rebuilt — a tall stack is more courses, more scaffolding and more days. Scope is second: a partial rebuild of the top few feet is HomeGuide’s $600–$1,000, while a full replacement runs $4,000–$15,000, and the line between them is how far the damage runs down the stack. Material is third: Angi prices brick at $60–$200 per linear foot on average, and a stone or specialty-brick stack prices above common brick. Access and condition are fourth: a steep roof, a chimney that leans, and a firebox that must be rebuilt with the stack all push a job toward the full-replacement tier. Worked example at the most-pay figure: materials $700 + mason labor $1,200 + crown, flashing and permits $300 = $2,200. For the smaller jobs around a rebuild, see our chimney repair guide and our brick repointing guide, and for the top of the stack see our chimney cap installation guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does a chimney rebuild cost?
Typically $1,500–$3,500 for a standard above-roofline rebuild, with $2,200 HomeGuide’s national average for a rebuild.
What is the difference between a partial and a full rebuild?
A partial rebuild redoes the top few feet or a small chimney at HomeGuide’s $600–$1,000; a full replacement rebuilds above and below the roofline at $4,000–$15,000.
How much does a chimney rebuild cost per linear foot?
HomeGuide prices a complete stack rebuild at $100–$300 per linear foot, and Angi prices rebuilding the stack at about $150 per linear foot for the sections actually rebuilt.
When does a chimney need rebuilding instead of repointing?
When the damage goes past the mortar: a leaning stack, structural cracks or widespread spalling mean courses of brick must come down and go back up, while repointing only renews the mortar joints between sound bricks.
Does a rebuild include a new chimney liner?
Not automatically — the liner is a separate line, priced on its own page, and a rebuild is the right time to ask whether the existing liner is still sound.






