Hurricane Shutters Installation cost at a glance
- Typical range: $2,000 – $5,830
- Most homeowners pay: around $3,635
Cross-checked against three published sources for this project. Sources used for this page: Angi, 2026 Hurricane Shutters Cost Guide (updated Sep 3, 2026 — national avg $3,635, most $1,440-$5,830, 372 verified projects; low $255 / high $11,000; $2-$60/sq ft; accordion $15-$30, roll-down $25-$60, Bahama $20-$35, colonial $25-$35, plywood $2-$6, storm panels $10-$20, fabric temp $5-$15 / permanent $25-$50; per 7-sq-ft window panels $115-$240, fabric $80-$205, Bahama $185-$345, colonial $220-$345, roll-down $220-$520, plywood $15-$45; labor $45-$100/hr; permits $50-$200 body / $150-$200 summary box; hurricane season June-November, mid-winter cheapest); HomeGuide, How Much Do Hurricane Shutters Cost? (2026) (published Oct 11, 2022, updated Feb 5, 2026 — national avg $4,700, range $2,000-$8,000, min $400 / max $15,000; per-window $35-$350, electric roll-down $350-$1,225; accordion $15-$25, panels $5-$20, fabric $5-$30, Bahama/colonial $20-$50, roll-down manual $20-$50 / electric $50-$175; labor $50-$80/hr, electrician $40-$100/hr, ~1 hr per permanent shutter; permits $50-$200; patio doors $10-$55/sq ft; ROI 40-50% vs 80-86% impact windows; FEMA: all windows need protection; Florida HVHZ needs Miami-Dade NOA or Florida Product Approval); Eurex Shutters, Hurricane Shutters Cost Guide in Florida 2026 (Florida shutter vendor — a vendor source, not fully independent; no date shown — accordion $26-$30/sq ft, Bahama $52-$55, panels $12-$16, fabric $17, roll-down $30-$35 motors/electrical excluded; premium whole-home $20,000+; contractor panel put-up/take-down $250-$500 per storm). Disagreements flagged, not averaged away: average Angi $3,635 vs HomeGuide $4,700; top end Angi $11,000 vs HomeGuide $15,000 vs Eurex $20,000+; Bahama $20-$35 (Angi) vs $20-$50 (HomeGuide) vs $52-$55 (Eurex); Angi permits $150-$200 summary box vs $50-$200 body text. Homewyse's $63.96-$90.49/sq ft treated as an outlier and not used. Breakdown is modelled from published ranges (tracks/hardware and motorization lines have no published line-item equivalent). Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi, Homewyse. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Budget — storm panels or fabric, temporary | $400 – $2,000 | Removable aluminum or steel storm panels ($10–$20 per sq ft, Angi) or fabric screens ($5–$15 per sq ft) for a smaller home, put up before a storm and taken down after. HomeGuide's minimum job is $400; panels run $115–$240 per 7-sq-ft window (Angi). No permanent hardware beyond tracks and anchors — but someone has to store them and put them up every time. |
| Mid-range — permanent accordion shutters | $2,000 – $6,000 | The typical project on this page: permanently installed accordion shutters across a typical home, with tracks, hardware and professional installation — $15–$30 per sq ft (Angi) or $15–$25 (HomeGuide). Bahama or colonial shutters on some windows sit at the upper end of this tier. |
| Premium — electric roll-down, premium Bahama/colonial, large homes | $6,000 – $15,000 | Motorized roll-down shutters with remotes and battery backup ($50–$175 per sq ft, HomeGuide), premium Bahama or colonial shutters, and coverage of large openings and sliding glass doors, with electrical wiring and permits. HomeGuide caps this tier at $15,000; a large premium home can pass $20,000 (Eurex). |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Shutter materials — accordion panels + tracks, 12 windows ≈ 84 sq ft | 52% of total | $1,900 — about $22.60 per sq ft, inside Angi's $15–$30 and HomeGuide's $15–$25 per sq ft for accordion shutters (84 sq ft × $15–$25 = $1,260–$2,100). Share derived from the worked example below, not a published percentage. |
| Installation labor — about 12 hours, ~1 hour per window | 25% of total | $900 — about $75 per hour, inside Angi's $45–$100 and HomeGuide's $50–$80 per hour; HomeGuide allows about 1 hour per permanent shutter. Share derived from the worked example below, not a published percentage. |
| Tracks, fasteners & mounting hardware | 11% of total | $400 — modelled: no source prices tracks and fasteners as a separate line. Share derived from the worked example below, not a published percentage. |
| Building permit | 4% of total | $150 — inside Angi's and HomeGuide's $50–$200 permit band (Angi's summary box says $150–$200). Share derived from the worked example below, not a published percentage. |
| Motorization/electrical allowance + delivery & setup | 8% of total | $285 — modelled: no source prices motorization as a line item; HomeGuide puts electrician work at $40–$100 per hour, and Eurex notes motors and electrical are extra. Share derived from the worked example below, not a published percentage. |

What moves the price most
Shutter type is the single biggest driver. Per square foot (Angi): storm panels $10–$20, fabric $5–$15 temporary ($25–$50 permanent), accordion $15–$30, Bahama $20–$35, colonial $25–$35, roll-down $25–$60, plywood $2–$6. HomeGuide splits roll-down into manual $20–$50 and electric $50–$175, and Eurex prices Bahama far higher at $52–$55 — see the disagreement note below. Window count and size: the bill scales on total square feet, so a full window count before quoting matters; larger and custom windows and sliding-glass doors cost proportionally more, and HomeGuide prices patio-door shutters at $10–$55 per sq ft. Material: aluminum is light and the most common; steel is heavier and stronger (2.5–3 lbs per ft against aluminum's 1–1.5); clear polycarbonate runs $10–$30 per sq ft (Angi) and lets light in while it protects. Motorization: an electric roll-down costs roughly 2–3 times a manual one, and motors, wiring and battery backup are extra — Eurex states they are not included in roll-down pricing. Permits and code: most coastal states require a permit ($50–$200, Angi and HomeGuide), and Florida's High-Velocity Hurricane Zone (Miami-Dade/Broward) requires Miami-Dade NOA or Florida Product Approval (HomeGuide). Timing: prices rise as hurricane season (June–November) approaches; mid-winter installs are the cheapest (Angi, HomeGuide). Location and access: upper-floor installs need extra equipment and time (Angi, HomeGuide). Where the sources disagree: the average itself — Angi's $3,635 from 372 verified projects against HomeGuide's $4,700; the top end — Angi $11,000 against HomeGuide $15,000 and Eurex's $20,000+ for large premium homes; and Bahama shutters most sharply — Angi $20–$35, HomeGuide $20–$50, Eurex $52–$55, likely because Eurex sells impact-rated full-view aluminum Bahama units in South Florida. Angi also contradicts itself on permits: its summary box says $150–$200 while its body text says $50–$200; this page publishes $50–$200. Homewyse's $63.96–$90.49 per sq ft for a basic aluminum-panel job is treated as an outlier and not used. Worked example at the most-pay figure: a typical whole-home job, about 12 standard windows (≈84 sq ft) with permanent accordion shutters — shutter materials $1,900 + installation labor $900 + tracks, fasteners & mounting hardware $400 + building permit $150 + motorization/electrical allowance & delivery $285 = $3,635. The shares are whole-percent roundings of this worked example; the tracks/hardware and motorization lines are modelled — no source prices them as separate line items. For the windows they protect see our window replacement guide, for storm-rated windows see our storm window installation guide, for the door beside them see our storm door installation guide, for decorative exterior shutters see our exterior shutters installation guide, and for window tinting see our window tinting guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much do hurricane shutters cost?
Most homeowners pay $2,000–$5,830, averaging $3,635 (Angi, 372 verified projects); HomeGuide puts the national average at $4,700 within a $2,000–$8,000 range. The honest overlap is $2,000–$5,830.
How much do hurricane shutters cost per window?
$35–$350 per standard 24-inch by 42-inch window depending on type (HomeGuide); electric roll-down $350–$1,225 per window. Angi's per-window figures for a 7-sq-ft window: panels $115–$240, Bahama $185–$345, colonial $220–$345, roll-down $220–$520.
What is the cheapest hurricane shutter?
Plywood at $2–$6 per sq ft (Angi) — but it is boarding up, not a rated shutter. The cheapest real shutter is storm panels: $5–$20 per sq ft (HomeGuide), $10–$20 (Angi), $12–$16 (Eurex).
Do I need a permit for hurricane shutters?
Often yes — most coastal states require one (HomeGuide). Expect $50–$200 (Angi, HomeGuide — Angi's summary box says $150–$200). Florida's High-Velocity Hurricane Zone needs Miami-Dade NOA or Florida Product Approval.
Accordion or roll-down — which costs more?
Accordion: $15–$25 per sq ft (HomeGuide), $15–$30 (Angi), $26–$30 (Eurex). Manual roll-down: $20–$50 per sq ft (HomeGuide), $30–$35 (Eurex, motors excluded). Electric roll-down is the most expensive: $50–$175 per sq ft (HomeGuide).
Are hurricane shutters worth the money?
For protection, yes: one broken window can pressurize a home and destroy its interior (HomeGuide, citing FEMA). On resale they return 40–50%, against 80–86% for impact windows (HomeGuide) — shutters cost less up front ($35–$350 per window vs $280–$490) but return less at resale. Professionally installed, code-approved shutters may qualify for insurance discounts.






