Swim Spa Installation cost at a glance
- Typical range: $20,000 – $40,000
- Most homeowners pay: around $22,500
Cross-checked against three published sources for this project. Sources used for this page: Angi, How Much Does a Swim Spa Cost? [2026 Data] (published Jan 30, 2024, updated Oct 25, 2026 — national average $22,500, most $20,000-$40,000, range $7,000-$70,000; quality tiers unit-centred: standard $7,000-$15,000, midrange $15,000-$25,000, high-end $25,000-$50,000+; 10-21 ft long, at least 8 ft wide; contractor $50-$150/hr; aboveground install from $300, in-ground to $7,000; leveling $3-$6/sq ft, concrete base $2-$6/sq ft, excavation $100/hr; crane $800-$1,500+; permits $200-$1,000; decking $3,000-$12,000, landscaping $4-$10/sq ft; electricity $20-$50/month small spa; water ~$0.004/gallon, 1,500-2,500 gallons, refill ~4x/year; saltwater $200-$700 extra (to $1,500); maintenance/repairs $110-$350, pool services $25-$100/hr; pro install $300-$7,000; lifespan 5-20 years; NAR 2023 report — pools lowest ROI, highest satisfaction); HomeGuide, How Much Does a Swim Spa Cost? (2026 Guide) (published Sep 19, 2023, updated Oct 13, 2023 — page titled 2026 but metadata 2023, the oldest source here; $20,000-$40,000 on average INCLUDING delivery and installation; range $10,000-$65,000+; installed tiers low-budget $10,000-$20,000 (12-15 ft), mid-range $20,000-$40,000 (15-20 ft), high-end $40,000-$65,000+ (15-20+ ft); 5-10 ft wide, 10-21 ft long; delivery $100-$1,500+; concrete pad $6-$12/sq ft; electrical $800-$1,600 (220V GFCI), subpanel $400-$600 (50A) / $500-$1,500 (100A), dedicated circuit $250-$900, underground wiring $10-$25/lin ft; yard levelling $0.40-$2.00/sq ft or $500-$1,000 avg; excavation $2.50-$15.00/cu yd or $100-$300/hr; deck $25-$50/sq ft, patio $5-$35/sq ft; cover $200-$1,500+, rolling cover $2,490-$4,390, automated cover ~$18,000-$20,000; steps $200-$1,000+; rowing kit $300-$400+, treadmill/swim bike $1,500-$10,000+; water 1,300-2,500 gallons, delivery $200-$600/truckload; maintenance $50-$300+/month all-in; lifespan 8-15 years avg (5 to 20+); depth 3.5-5 ft; in-ground pool $28,000-$55,000, above-ground pool $1,800-$5,000; filled weight 20,000+ lbs); Engineer Fix, How Much Are Swim Spa Pools? A Full Cost Breakdown (no date shown; index last-updated ~Dec 2025 — entry $15,000-$20,000 (12-14 ft), mid-range $25,000-$35,000 (16-18 ft), premium $40,000-$60,000+; crane $500-$3,000; concrete pad $5-$10/sq ft, typically $2,500-$4,000 total; electrical $800-$1,600 (240V, 50-60 amp, GFCI), panel upgrade can exceed $2,800; electricity $50-$100/month, 150-500 kWh/month, current draws 4,000-6,000 watts/hr; chemicals $300-$800/year (salt under $100/year, salt cell $200-$700 every 3-7 years); heater replacement $1,500-$5,000, pump $400-$1,200, major components last 8-10 years); Epic Hot Tubs (North Carolina dealer — vendor source, used only as corroboration), How Much Does a Swim Spa Cost in 2026? (updated Oct 2026 — real sales $19,500-$37,000 before tax incl. delivery, standard cover, steps, chemical kit; by length 12-14 ft $19,490-$24,990, 15-17 ft $19,500-$30,990, 18 ft+ $25,980-$36,990; pad + electrical $2,000-$4,000 more; in-ground/semi-in-ground adds ~$10,000-$15,000 plus permits). Disagreements flagged, not averaged away: same $20,000-$40,000 band, different scopes (Angi unit-centred vs HomeGuide installed); low end $7,000 (Angi) vs $10,000 (HomeGuide) vs $15,000 (Engineer Fix) vs ~$19,500 dealer floor; concrete pad $2-$6/sq ft (Angi) vs $6-$12 (HomeGuide/Epic) vs $5-$10 (Engineer Fix); yard levelling $3-$6/sq ft (Angi) vs $0.40-$2.00 (HomeGuide); crane $800-$1,500+ (Angi) vs $500-$3,000 (Engineer Fix); electricity $20-$50/month (Angi) vs $50-$100 (Engineer Fix); lifespan 5-20 years (Angi) vs 8-15 avg (HomeGuide). No source publishes a labor % share for swim spas. Worked example and shares are derived from the source ranges, not published percentages. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi, Engineer Fix. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Budget — basic swim-in-place unit, 12–15 ft | $10,000 – $20,000 | A basic swim-in-place unit, 12–15 ft long, with basic jets and no energy-efficient insulation (HomeGuide, installed including delivery). Angi's unit-only standard tier is lower, $7,000–$15,000 — the difference is delivery and installation, which HomeGuide's tier includes and Angi's does not. |
| Mid-range — 15–20 ft, better jets, dual temperature | $20,000 – $40,000 | The typical project on this page: a 15–20 ft unit with more and better jets, extra exercise options and dual-temperature zones (HomeGuide, installed). Most homeowners choose this tier, and a 15–17 ft unit sold for $19,500–$30,990 before tax at one North Carolina dealer (Epic Hot Tubs, October 2026). |
| Premium — 15–20+ ft, high-end hydrotherapy, smart controls | $40,000 – $65,000+ | The largest units with maximum space, high-end hydromassage, propeller swim systems, underwater treadmills and smart controls (HomeGuide $40,000–$65,000+ installed; Engineer Fix $40,000–$60,000+ unit price). An automated cover alone adds about $18,000–$20,000 (HomeGuide). |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Swim spa unit — mid-range, 15–17 ft | 80% of total | $18,000 — inside Angi's $15,000–$25,000 midrange unit band (dealer sales for this size started near $19,500 before tax, Epic Hot Tubs). Share derived from the worked example below, not a published percentage. |
| Delivery, crane & pro installation | 5% of total | $1,125 — inside HomeGuide's $100–$1,500+ delivery band and Angi's $300–$7,000 pro-installation band (a simple aboveground install starts at $300; a crane runs $500–$3,000 combined). Share derived from the worked example below, not a published percentage. |
| Concrete pad — 200 sq ft reinforced slab | 8% of total | $1,800 — exactly 200 sq ft at $9 per sq ft, inside HomeGuide's $6–$12 per sq ft band (Epic's own maths: a 200 sq ft pad is about $1,200–$2,400). Share derived from the worked example below, not a published percentage. |
| Electrical — dedicated 220V circuit & subpanel | 6% of total | $1,350 — inside HomeGuide's $800–$1,600 band for a dedicated 220V circuit with GFCI (Engineer Fix agrees exactly); a subpanel adds $400–$600 (50-amp) or $500–$1,500 (100-amp). Share derived from the worked example below, not a published percentage. |
| Permits | 1% of total | $225 — inside Angi's $200–$1,000 permit band. Share derived from the worked example below, not a published percentage. |

What moves the price most
Size and length: swim spas are at least 8 ft wide and 10–21 ft long (Angi) — bigger than a hot tub, smaller than a pool. One dealer's real sales (Epic Hot Tubs, October 2026): 12–14 ft $19,490–$24,990, 15–17 ft $19,500–$30,990, 18 ft and up $25,980–$36,990 before tax, including delivery, a standard cover, steps and a chemical kit. In-ground vs above-ground is the single biggest driver (Angi): a pro installation runs $300 for a simple above-ground job to $7,000 for in-ground, and going in-ground or semi-in-ground adds about $10,000–$15,000 plus permits (Epic) for excavation, drainage, concrete and permits. Swim-current system: jet propulsion is cheapest, propeller systems cost more with a stronger swim, and paddlewheel systems cost the most with the smoothest, most stable current (HomeGuide). Decking and enclosure: pool decking runs $3,000–$12,000 (Angi) or $25–$50 per sq ft (HomeGuide), and a patio $5–$35 per sq ft. Electrical: a swim spa needs a dedicated 220V/240V circuit ($800–$1,600, HomeGuide and Engineer Fix agree), a subpanel ($400–$600 for 50-amp, $500–$1,500 for 100-amp), and possibly a main-panel upgrade, which can exceed $2,800 (Engineer Fix). Access and crane: a difficult backyard needs a crane at $500–$3,000 combined (Angi $800–$1,500+; Engineer Fix $500–$3,000). Insulation and energy efficiency: fully insulated cabinets cost more up front and less to run; wood-framed cabinets are cheaper but less durable than steel (HomeGuide). Features and upgrades: dual-temperature/dual-zone sections, hydrotherapy jets, Wi-Fi/app control, lighting, speakers, a saltwater system ($200–$700 extra equipment, up to $1,500, Angi) and an automated cover (about $18,000–$20,000, HomeGuide). Weight: a filled swim spa weighs 20,000+ lbs (HomeGuide) and needs a reinforced pad — a deck must be checked by a licensed builder before placement. Where the sources disagree: the $20,000–$40,000 typical band is the same number at Angi and HomeGuide but covers different scopes (Angi unit-centred, HomeGuide installed including delivery); the concrete pad (Angi $2–$6 per sq ft vs HomeGuide/Epic $6–$12 — this page uses $6–$12 as the planning figure for a reinforced pad); yard levelling (Angi $3–$6 per sq ft vs HomeGuide $0.40–$2.00, or $500–$1,000 on average); and running costs (Angi $20–$50 a month for electricity on a small spa vs Engineer Fix $50–$100; HomeGuide puts all-in maintenance at $50–$300+ a month). Worked example at the most-pay figure: an above-ground mid-range swim spa, 15–17 ft — unit $18,000 + delivery, crane & pro installation $1,125 + concrete pad $1,800 + electrical $1,350 + permits $225 = $22,500. The shares are whole-percent roundings of this worked example. An in-ground install, decking, a cover ($200–$1,500+) and the first water fill ($200–$600 a truckload) are not in this example. For the hot tub it resembles see our hot tub installation guide, for a full pool instead see our pool installation guide, for the deck around it see our deck building guide, for the concrete pad see our concrete driveway guide, and for the electrical work see our electrical panel upgrade guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
Swim spa vs hot tub — what is the difference, and which costs more?
A swim spa is a hybrid: hot-tub heating and jets plus a continuous current to swim against, like a water treadmill. A hot tub costs $2,000–$11,000; a swim spa $7,000–$50,000, averaging about $22,500 (Angi). A swim spa is 10–21 ft long against a hot tub's few feet, and installation takes a similar 6–8 hours for an above-ground unit (Angi).
Swim spa vs pool — which costs more?
A swim spa costs less than an in-ground pool but more than an above-ground pool (HomeGuide). An in-ground pool runs $28,000–$55,000 total on average and an above-ground pool $1,800–$5,000 installed (HomeGuide); Angi prices in-ground pool installation higher, at $40,000–$100,000 excluding chemicals, electricity, fencing and insurance.
Does a swim spa add home value?
It is unlikely you will get the full investment back (Angi). A 2023 National Association of Realtors report cited by Angi gives pools some of the lowest ROIs of outdoor remodels but some of the highest satisfaction levels — and a basic swim spa is a much smaller investment than a fibreglass or concrete pool. The best return comes from incorporating it into the landscape design; landscape upgrades typically have a 100% ROI per that report.
How much does it cost to run a swim spa?
Electricity runs $20–$100 a month — Angi says $20–$50 for a small swim spa, Engineer Fix $50–$100 on average (150–500 kWh a month; the swim current can draw 4,000–6,000 watts an hour). All-in maintenance, electricity plus chemicals plus filtration, runs $50–$300+ a month (HomeGuide). Chemicals alone run $300–$800 a year with chlorine or bromine, under $100 a year with a saltwater system (Engineer Fix).
How long does installation take?
A professional install of an above-ground unit typically takes 6–8 hours — usually less than a day to get a swim spa up and running (Angi). An in-ground install takes longer for excavation, concrete and permits; no source gives a day count for it, so none is published here.
Do I need a permit for a swim spa?
Most local regulations require a permit, particularly for in-ground models (Angi), and permit fees run $200–$1,000 depending on the municipality. For an in-ground install you typically cannot get a permit unless a licensed contractor is on board (Angi); permits are set by the town or county and arranged by the buyer (Epic Hot Tubs).






