Storm Door Installation cost at a glance
- Typical range: $350 – $700
- Most homeowners pay: around $450
- Prices vary most by: Storm door unit (45–55% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: Angi's storm door installation cost guide, HomeGuide's storm door installation cost guide and HomeAdvisor's storm door installation cost data. Sources last checked: October 2026 — HomeAdvisor, HomeGuide, Angi. Last updated October 2026 · How we calculate these costs
Cost by scope
| Scope | Typical cost | What it includes |
|---|---|---|
| Basic high-view or mid-view door | $250 – $500 | The simple end: a mostly-solid door with a smaller glass panel, in vinyl or aluminum. Angi's installed band starts at $185 with an average of $400 across storm doors, its high-view units run $150–$325 and mid-view $160–$300 before labor, and HomeGuide prices mid-view doors installed from $350. |
| Standard full-view or self-storing door | $350 – $700 | The typical project on this page: a full-glass or screen-swapping door fitted to the existing frame. HomeGuide prices full-view doors installed at $425–$950 and self-storing models at $375–$700, and HomeAdvisor's national average for a storm door installation is $435. |
| Security or double storm door | $700 – $1,800 | A steel security door with a locking frame, or a double door over a wide entry. HomeGuide prices security storm doors installed at $475–$1,150 and double storm doors at $800–$1,800; Angi's unit prices run $350–$750 for security models and $600–$1,100 for doubles before labor. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Storm door unit | 45–55% | The door itself: HomeGuide puts the door at $175–$600 of an installed job, and Angi's material table runs from vinyl at $100–$500 and aluminum at $150–$500 to steel at $150–$1,000 and wood at $275–$1,500 |
| Installation labor | 30–40% | Fitting, hanging and adjusting the door: HomeGuide prices storm door labor at $175–$350 and HomeAdvisor at $250–$450, for a job HomeGuide puts at 2–4 hours in a sound opening |
| Closer, handle & glass options | 5–10% | The hardware and pane choices: a pneumatic closer and handle set come with most doors, while HomeAdvisor prices low-E glass at $25–$50 extra per pane and tempered or beveled glass at $50–$80 extra per pane |
| Old door removal & disposal | 5–10% | On replacement jobs: removing and disposing of the old storm door adds $50–$100 in both HomeGuide and HomeAdvisor |
What moves the price most
Door type sets the unit price. In Angi's table the glass share drives it: high-view doors at $150–$325, mid-view $160–$300, full-view $200–$525, retractable-screen models $250–$600, security doors $350–$750 and doubles $600–$1,100 — and HomeGuide's installed prices keep the same order, from mid-view at $350–$700 to doubles at $800–$1,800. Material is the second lever: vinyl and aluminum frames sit at $100–$500 in Angi, composite at $150–$600, steel up to $1,000 and wood up to $1,500, with steel the standard pick for high-wind areas and vinyl the one that can warp in extreme heat. The frame is the third — and the budget-breaker: a storm door hangs on the existing entry frame, so a sound, square opening is a 2–4 hour job in HomeGuide; an opening that needs reframing averages $1,220 in HomeAdvisor, more than the door itself. Finally, timing: HomeAdvisor notes off-season installation can save 10–30%, because storm doors are a seasonal rush purchase every autumn.
Worked example: how a typical storm door installation budget breaks down
A typical job: one standard full-view aluminum storm door fitted to an existing sound entry frame — old storm door removed and hauled away, new door hung, closer and handle fitted and adjusted. The budget below totals $450 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.
| Line item | Example budget |
|---|---|
| Standard full-view storm door unit | $225 |
| Installation labor | $150 |
| Closer, handle set and hardware | $25 |
| Old door removal and disposal | $50 |
| Total | $450 |
What most people get wrong
- Measuring the opening once, in one place — entry frames settle out of square, and Angi's installer guidance is to measure at the top, middle and bottom; a door ordered from a single measurement binds or gaps from day one.
- Ordering a custom size before checking whether the frame can be built out to a standard one — standard sizes are the stock, returnable end of every price table on this page, and custom sizes are neither.
- Blaming the door for a frame problem — a racked or rotted entry frame makes any storm door leak and rattle; HomeAdvisor puts reframing at $1,220 on average, and finding that out after the door is bought is the expensive order to do it in.
- Leaving the closer unadjusted — a storm door that slams or fails to latch is usually a closer setting, not a defect, and the adjustment belongs in the installer's visit, not in a second call-out.
Costs in your city
Storm door pricing follows local handyman and door-installer labor: HomeGuide puts installation labor at $175–$350 and HomeAdvisor at $250–$450, so the same door prices noticeably higher in high-rate metros. Climate travels with the city — steel doors earn their premium in high-wind and storm-prone regions, vinyl can warp in sustained extreme heat, and northern entries gain the most from the insulation a full-view door adds. The door itself is a stock retail item priced much the same everywhere, which is why quotes differ mostly on the labor and frame lines. Ask each bidder whether the price assumes a sound existing frame, whether old-door disposal is included, and what a non-standard opening would add before they start.
Frequently asked questions
How much does it cost to install a storm door?
For a standard single door, budget $350–$700 installed. Angi's band is $185–$700 with an average of $400, HomeGuide's installed range is $350–$950 with most standard styles between $350 and $700, and HomeAdvisor's national average is $435 — the three guides land in the same place for a standard door on a sound frame.
How long does it take to install a storm door?
HomeGuide puts a professional installation at 2–4 hours for a standard pre-hung door in a good opening. HomeAdvisor suggests a DIYer allow 3–5 hours for the same job. Custom sizes, out-of-square frames and frame repairs are what stretch it past that.
What is the difference between a storm door and a screen door?
A screen door is mesh only — Angi averages about $300 for one — and it ventilates without insulating. A storm door adds a glass panel (fixed, swapping or self-storing) over or instead of the screen, which is what protects the entry door from weather and cuts drafts; that glass is also most of the price difference.
How long does a storm door last?
HomeGuide puts the lifespan at 15–30 years depending on material, climate and use. Aluminum and composite frames sit at the durable, low-maintenance end; wood needs regular refinishing to reach the same span, and closers and handles are wear parts that may be replaced once or twice in the door's life.
Do I need a permit to install a storm door?
A like-for-like storm door on an existing frame is a minor job that rarely needs a permit. The exception is changing the opening itself — widening or reframing is structural work, it is where HomeAdvisor's $1,220 average reframing cost comes from, and it can require approval. Check before ordering a custom size.
