Home › Cost Guides › Window Tinting
Cost Guide

How Much Does Window Tinting Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$300 – $950
Most homeowners pay around $615 · Home window tinting typically costs $300 – $950 for a standard residential project, with about $615 the figure most jobs land near — Angi averages $614 inside its $317–$944 band from 4,586 verified projects, and This Old House averages $611 inside its $316–$941 band, so the two national guides agree almost exactly. The price is per project, not per window: Angi prices film installed at $5–$20 per square foot, and This Old House prices installer labor at $5–$10 per square foot, so glass area and film type move the bill more than window count.
typical
$300$950
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Brick house with white-framed windows and a red door

Window Tinting cost at a glance

  • Typical range: $300 – $950
  • Most homeowners pay: around $615
  • Prices vary most by: Installation labor (40–55% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's home window tinting cost guide, updated October 30, 2026 (national average $614 across 4,586 verified projects, most $317–$944; installed $5–$20 per square foot, $7–$15 on average; standard window $300–$900, large/picture $400–$1,200, custom/arched $500–$1,500 as project classes; smart/switchable films $25–$200 per square foot; permits may be required in historic districts), This Old House's home window tinting guide (average $611, band $316–$941; installer labor $5–$10 per square foot; pricing from Angi and HomeAdvisor data plus a November 2025 survey of 1,000 homeowners) and HomeYou's window tint cost guide (typical $189–$736, average around $644; dyed $189–$580, metalized $276–$701, ceramic $385–$796 as project bands) — the page's typical band is the Angi/This Old House overlap, and its $615 most-pay figure is the two guides' near-identical averages rounded. Sources last checked: October 2026 — This Old House, HomeAdvisor, Angi. How we calculate these costs

Cost by scope

Window Tinting cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Basic dyed film, a few windows$300 – $600The cheap end: dyed film is the entry film in the guides, and Angi's band starts at $317 — a small room or the sunniest side of the house
Standard solar/UV film — the typical job$300 – $950The shared band itself: Angi $317–$944 averaging $614, This Old House $316–$941 averaging $611 — standard film on a typical set of windows
Ceramic, security or smart film — the top end$950 – $2,000+The expensive end: Angi prices smart/switchable films at $25–$200 per square foot, and ceramic and security films sit above standard solar film per square foot — large picture windows and premium films push a job here

Where the money goes

Part of the jobShareNote
Window film (material)35–50% of totalThe film ladder: Angi prices installed film at $5–$20 per square foot by type, from basic dyed to ceramic and smart films
Installation labor40–55% of totalThe fitting: This Old House prices installer labor at $5–$10 per square foot, and Angi prices the installed total at $7–$15 per square foot on average
Prep, access and old-film removal5–15% of totalThe rest: cleaning, cutting around frames, high or hard-to-reach windows, and stripping old film where it exists — small jobs also carry minimum service fees in Angi
Window film (material) · 35–50%Installation labor · 40–55%Prep, access and old-film removal · 5–15%
Estimator’s note: on window tinting, installation labor is usually where quotes swing most (40–55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A worker on a large glass window: labor is the 40–55% line in this guide's breakdown — This Old House prices installer labor at $5–$10 per square foot
A worker on a large glass window: labor is the 40–55% line in this guide's breakdown — This Old House prices installer labor at $5–$10 per square foot

What moves the price most

Glass area is the first driver, not window count. Angi prices film installed at $5–$20 per square foot and $7–$15 per square foot on average, so a house with large picture windows costs more than a house with the same number of small windows. Film type is second: dyed film is the budget choice, standard solar film is the typical job, and Angi prices smart/switchable films at $25–$200 per square foot — the film is the price ladder. Window size and shape are third: Angi prices large and custom-shaped windows above standard windows, because cutting and fitting them takes longer. Finally, access and old film bite: high windows, skylights and stripping an existing film add labor, and Angi notes permits may be required in historic districts.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Blue-tinted windows in close view: the film is the price ladder — from basic dyed film up to ceramic and smart films at $25–$200 per square foot in Angi
Blue-tinted windows in close view: the film is the price ladder — from basic dyed film up to ceramic and smart films at $25–$200 per square foot in Angi

Frequently asked questions

How much does home window tinting cost?

Typically $300–$950 for a standard residential project, with about $615 the figure most jobs land near — Angi averages $614 and This Old House averages $611, inside near-identical bands.

Is window tinting priced per window or per square foot?

Per square foot is the honest measure: Angi prices installed film at $5–$20 per square foot, $7–$15 on average. A per-window figure misleads where sizes differ — a picture window carries several times the glass of a small bathroom window.

Dyed, ceramic or smart film — which should I choose?

Dyed is cheapest and mainly cuts glare and adds privacy. Ceramic costs more per square foot and rejects more heat without interfering with phone or radio signals. Smart/switchable film, at $25–$200 per square foot in Angi, changes opacity on demand — a specialty product, not a standard tint.

Can I tint my windows myself?

Kits exist, but this page prices professional installation: the guides' bands are installed prices, and the DIY risk is bubbles, creases and a film that peels early, with no installer warranty behind it.

Does window film replace new windows?

No: film cuts glare, heat and UV on existing glass. It does not fix failed seals, drafts or rotted frames — a window that fogs between panes needs the glass or the window, not a film.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Window Tinting cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Historic corner townhouse with projecting bay windows on several floors

Bay Window Installation Cost

$2,000 – $4,000

Bay window installation typically costs $2,000 – $4,000 for a standard three-panel bay in a vinyl or fiberglass frame, with about $2,500 the figure most jobs land near — Angi's national average is $2,500 inside its $2,000–$4,000 most-pay band, and HomeGuide's midrange band is $2,000–$6,000. This guide covers a new bay window project; replacing an existing bay in its current opening is cheaper, and is covered in our window replacement guide.

Single-story house at dusk with a shingle roof, gutters and downspouts, and a wet driveway after rain

Gutter Installation Cost

$1,050 – $1,800

Typical cost for about 150 linear feet of seamless aluminum gutters, installed — standard aluminum runs about $7 – $12 per linear foot installed across the published guides

Modern house with a downspout running down its side wall

Downspout Installation Cost

$315 – $625

Installing or replacing 4–5 standard aluminum or vinyl downspouts on a one- or two-story home — the vertical pipes that carry gutter water away from the foundation

Brick house with a wooden front door with sidelights and a transom

Exterior Door Replacement Cost

$500 – $1,900

Typical cost for one standard single front door, pre-hung and installed — a standard entry runs about $500 – $1,900 installed across the published guides

Stone-look paver patio around a pool with shade sails and loungers

Patio Installation Cost

$2,500 – $6,000

The typical project is a ground-level patio of about 300 square feet in poured concrete or pavers — about $8 – $20 per sq ft installed. Natural stone, raised construction, steps and poor drainage are what move a patio into five figures.

Worker guiding a concrete pump hose over wet concrete

Concrete Patio Installation Cost

$2,000 – $5,000

Concrete patio installation typically costs $2,000 – $5,000 for about 400 square feet (20 by 20 feet) of plain or broom-finished concrete, with about $3,600 the figure most jobs land near — Angi, updated September 23, 2026, puts the national average at $3,557 with most homeowners paying $1,919–$5,393 at $4–$30 per square foot, while HomeGuide prices a 20-by-20 plain patio at $1,600–$4,800 at $4–$12 per square foot and EngineerFix prices a standard broom-finished patio at $6–$13 per square foot. The guides agree on the plain-concrete band; the page's band is the rounded synthesis of the plain and broom bands, and decorative finishes are a separate tier, not part of the typical figure.