Home › Cost Guides › Tennis Court Installation
Cost Guide

How Much Does a Tennis Court Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$45,000 – $80,000
Most homeowners pay around $65,000 · Building a full-size outdoor tennis court — a levelled 120 × 60 ft footprint with a concrete or asphalt base, an acrylic finish, fencing, a net and lighting — typically costs $45,000–$80,000, with most homeowners paying around $65,000.
typical
$45,000$80,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
An empty outdoor tennis court with seating and floodlights, seen through the fence

Tennis Court Installation cost at a glance

  • Typical range: $45,000 – $80,000
  • Most homeowners pay: around $65,000

Cross-checked against three published sources for this project. Sources used for this page: HomeGuide, How Much Does It Cost to Build a Tennis Court? (2026) (published May 4, 2023, updated Oct 31, 2025 — typical $40,000-$100,000 for a 120 x 60 ft court area; $5-$14 per sq ft installed; clay cheapest, from $25,000, concrete/rubber most expensive; backyard install $25,000 clay to $115,000 concrete; fencing $4,300-$10,800, chain-link $10-$40 per lin ft, 360 ft for a 60x120 ft area; lighting $1,500-$6,000 residential, $15,000-$30,000 stadium; resurfacing $4,000-$10,800 every 4-10 years, resealing $1,200-$1,700, repainting $4,000-$9,000; permits $100-$750; indoor $85,000-$300,000 incl. housing; build time 1-2 months concrete/asphalt, clay under a week; component $/sq ft: gravel base $1-$3, clay/Har-Tru $2.50-$9.50, asphalt $5-$12+, concrete slab $5-$10, acrylic $1-$3 (up to $8 with rubberized layers), artificial grass $10-$25, sod $1-$2); Angi, How Much Does It Cost to Build a Tennis Court? [2026 Data] (published Nov 3, 2022, updated Oct 16, 2026 — national average $14,889, most $5,776-$24,002, LINES-ONLY scope: doubles 78x36 ft = 2,808 sq ft x $5-$14 = $14,040-$39,312; site prep $5,000-$15,000, surfacing $2,500-$50,000, fencing $5,000-$12,000, lighting $1,500-$6,000, accessories $1,500-$5,000; $5-$14/sq ft; doubles $14,000-$39,300, singles $10,500-$29,500, half-size $3,500-$9,800, mini/youth $3,240-$9,000; GC 10-20%, landscape architect $70-$150/hr, surveyor $400-$800, electrician $50-$130/hr; clearing $1,000-$4,000, tree removal $200-$2,000/tree, grading $1,000-$10,000; permits $200-$2,000, 2 weeks to several months; DIY materials $10,000-$50,000; pro build 4-8 weeks; renovation $3,000-$20,000, remodel $20,000-$60,000+; ROI 30-50%, lower than pools); Fixr, Tennis Court Installation Cost (updated Jan 31, 2025 — national average $65,000, average range $45,000-$80,000, low $25,000 / high $150,000; surface totals grass $20,000-$75,000, synthetic grass $25,000-$80,000, asphalt $40,000-$80,000, concrete $45,000-$80,000, clay $60,000-$90,000, acrylic $65,000-$100,000, rubber $75,000-$100,000; singles $45,000-$80,000, doubles $65,000-$90,000; labor $30,000-$35,000 alone, materials $10,000-$50,000; fencing $5,000-$12,000; lighting $2,000-$5,000; maintenance ~$1,800/year; indoor $70,000-$150,000; hard courts cure 30-60 days before acrylic coating). Disagreements flagged, not averaged away: national average Angi $14,889 (lines-only scope) vs Fixr $65,000 vs HomeGuide $40,000-$100,000 range — this page uses the HomeGuide/Fixr full-footprint scope and explains the arithmetic; clay cheapest (HomeGuide, from $25,000) vs one of the most expensive (Fixr, $60,000-$90,000); concrete HomeGuide $60,000-$115,000 (via secondary quote) vs Fixr $45,000-$80,000; fencing $4,300-$10,800 (HomeGuide) vs $5,000-$12,000 (Angi/Fixr); permits $100-$750 vs $200-$2,000; resurfacing $4,000-$10,800 vs $2,500-$12,600. No source publishes a single labor % share or explicit budget/mid/premium tiers — tiers are derived synthesis. Worked example and shares are derived from the source ranges, not published percentages. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Tennis Court Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — smaller singles or half-size court, basic surface, minimal fencing$25,000 – $40,000A smaller singles court or a half-size practice court (Angi prices half-size 39×18 ft at $3,500–$9,800 and mini/youth 36×18 ft at $3,240–$9,000) with a basic clay, gravel or asphalt surface and minimal fencing, no lighting, on a flat site needing little grading. Fixr's low end is $25,000 for a smaller singles court with minimal room for side runs and mid-grade materials; HomeGuide's clay range starts at $25,000 too.
Mid-range — full-size singles or doubles court, acrylic finish, standard fencing$45,000 – $80,000The typical project on this page: a full-size singles (130×55 ft) or doubles court with a concrete or asphalt base and an acrylic or resilient finish, standard 8–10 ft fencing, a net and posts, with basic lighting optional. Fixr's average range is $45,000–$80,000 with a $65,000 national average; HomeGuide's range is $40,000–$100,000.
Premium — cushioned acrylic or rubber, pro lighting, seating, or an indoor court$80,000 – $150,000+A post-tensioned concrete or cushioned acrylic/rubber surface (Fixr: acrylic $65,000–$100,000, rubber $75,000–$100,000), full fencing with windscreens, professional stadium lighting ($15,000–$30,000, HomeGuide), seating, a backboard and storage, extensive grading and drainage — or an indoor court, which Fixr prices at $70,000–$150,000 and HomeGuide at $85,000–$300,000 including the housing.

Where the money goes

Part of the jobShareNote
Site preparation & grading15% of total$9,750 — inside Angi's $5,000–$15,000 site-preparation band (clearing $1,000–$4,000, grading and soil stabilization $1,000–$10,000). Share derived from the worked example below, not a published percentage.
Base & acrylic surfacing (singles court, 130 × 55 ft)55% of total$35,750 — exactly 7,150 sq ft at $5 per sq ft, the low end of the $5–$14 per sq ft band both HomeGuide and Angi publish; inside Angi's $2,500–$50,000 surfacing band. Share derived from the worked example below, not a published percentage.
Fencing (10 ft chain-link, about 360 lin ft)12% of total$7,800 — inside the $4,300–$12,000 combined fencing band (HomeGuide $4,300–$10,800; Angi and Fixr $5,000–$12,000) and inside HomeGuide's $10–$40 per linear foot for chain-link. Share derived from the worked example below, not a published percentage.
Lighting, net, posts & accessories11% of total$7,150 — lighting inside the $1,500–$6,000 band (HomeGuide/Angi) and accessories inside Angi's $1,500–$5,000 band; the two published bands together span $3,000–$11,000. Share derived from the worked example below, not a published percentage.
Permits, survey & drainage7% of total$4,550 — permits inside the $100–$2,000 combined band (HomeGuide $100–$750; Angi $200–$2,000), a land survey at $400–$800 (Angi), and a French drain at $10–$35 per linear foot (HomeGuide). Share derived from the worked example below, not a published percentage.
Site preparation & grading · 15%Base & acrylic surfacing (singles court, 130 × 55 ft) · 55%Fencing (10 ft chain-link, about 360 lin ft) · 12%Lighting, net, posts & accessories · 11%Permits, survey & drainage · 7%
Estimator’s note: on a tennis court installation, base & acrylic surfacing (singles court, 130 × 55 ft) is usually where quotes swing most (55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
An empty court with nets and a sheltered bench area — a full-size singles court (130 × 55 ft) at $5–$14 per sq ft is the $35,750 surfacing line in the worked example below
An empty court with nets and a sheltered bench area — a full-size singles court (130 × 55 ft) at $5–$14 per sq ft is the $35,750 surfacing line in the worked example below

What moves the price most

Surface type is the single biggest cost decision. Fixr's installed totals by surface: grass $20,000–$75,000, synthetic grass $25,000–$80,000, asphalt $40,000–$80,000, concrete $45,000–$80,000, clay $60,000–$90,000, acrylic $65,000–$100,000, rubber $75,000–$100,000. HomeGuide disagrees on clay — it calls clay the cheapest surface, with its range starting at $25,000 — so this page publishes clay as $25,000–$90,000 and flags the dispute rather than picking a side; clay also carries the highest upkeep in any case. Court size: a doubles playing area is 78×36 ft and a singles area 78×27 ft, but the full build footprint including run-backs is about 120×60 ft (HomeGuide) or 130×55 ft for singles and 130×70 ft for doubles (Fixr). Both HomeGuide and Angi price the work at $5–$14 per square foot — the same band, but applied to different areas, which is why their headline averages look so different. Read Angi's average with care: Angi's $14,889 national average and $5,776–$24,002 most-pay band price the lines-only area (78×36 ft = 2,808 sq ft × $5–$14 = $14,040–$39,312), while HomeGuide's $40,000–$100,000 prices the full footprint (120×60 ft = 7,200 sq ft × $5–$14 = $36,000–$100,800). Angi's figure excludes much of the run-back area, fencing and full site work that HomeGuide and Fixr include — it is not the cost of a full court. Site slope, soil and drainage: grading, excavation, French drains ($10–$35 per linear foot, HomeGuide) and retaining work push costs up sharply on steep, rocky or poorly draining sites; Angi puts grading at $1,000–$10,000. Fencing and lighting: fencing $4,300–$12,000 combined, residential lighting $1,500–$6,000, professional stadium lighting $15,000–$30,000. Location and labor: California and New York cost more than the Midwest or South (Angi); a general contractor runs 10–20% of the project total. Fixr prices labor alone at $30,000–$35,000 with materials at $10,000–$50,000 — a different accounting from Angi's per-component installed prices, so the two should not be added together. Climate: heavy rainfall or freeze-thaw cycles need extra drainage or more durable surfaces. Add-ons: a backboard ($1,800–$10,000 across sources), seating, storage, windscreens, a bubble enclosure ($10,000–$30,000) and landscaping ($500–$2,500). Permits: $100–$2,000 combined (HomeGuide $100–$750; Angi $200–$2,000), and the process can take two weeks to several months. Maintenance is a running cost: about $1,800 a year on average (Fixr), with resurfacing at $4,000–$10,800 every 4–10 years (HomeGuide); grass is the highest-maintenance surface and acrylic the lowest. Worked example at the most-pay figure: a full-size singles court, 130×55 ft including run-backs — site preparation & grading $9,750 + base & acrylic surfacing $35,750 + fencing $7,800 + lighting, net, posts & accessories $7,150 + permits, survey & drainage $4,550 = $65,000. The shares are whole-percent roundings of this worked example. For the pool beside it see our pool installation guide, for the fence around it see our fence installation guide, for the patio next to it see our patio installation guide, for the planting around it see our landscaping installation guide, and for the deck beside it see our deck building guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A clay court line close-up — clay is the disputed surface: HomeGuide prices clay courts from $25,000, Fixr at $60,000–$90,000, and clay needs the most upkeep of any surface
A clay court line close-up — clay is the disputed surface: HomeGuide prices clay courts from $25,000, Fixr at $60,000–$90,000, and clay needs the most upkeep of any surface

Frequently asked questions

How much does it cost to build a tennis court?

Most homeowners pay $45,000–$80,000, with a $65,000 national average (Fixr); HomeGuide's range is $40,000–$100,000. Angi's $14,889 average is much lower because it prices the lines-only playing area, not the full 120×60 ft footprint with fencing and site work — the honest planning range for a full outdoor residential court is $45,000–$80,000, with $25,000–$150,000+ possible by surface and site.

What is the cheapest surface for a tennis court?

The sources disagree, so there is no single answer. HomeGuide calls clay the cheapest surface, with its range starting at $25,000; Fixr prices clay at $60,000–$90,000 and calls grass ($20,000–$75,000) its cheapest installed surface. The cheapest route is a basic clay/gravel or grass court at roughly $20,000–$25,000 at the low end — and clay carries the highest upkeep either way.

Does a tennis court add value to your home?

It can, with conditions. A well-built court can recoup 30% to 50% of construction costs, especially in upscale neighborhoods (Angi), but the return is typically lower than for pools, and a neglected or poorly built court may deter buyers. HomeGuide adds that it helps where there is high demand for outdoor courts and the court is well maintained.

How long does it take to build a tennis court?

A professional build typically takes 4–8 weeks (Angi); HomeGuide says 1–2 months on average for concrete or asphalt, while a clay court takes less than a week for deliveries, grading, leveling and compacting. Hard courts must then cure 30–60 days before an acrylic coating can be applied (Fixr), so the full timeline to first use is longer than the build itself.

Do I need a permit to build a tennis court?

Yes, typically. Most areas require zoning, construction and sometimes environmental permits (Angi); HomeGuide puts permit fees at $100–$750 and Angi at $200–$2,000, so this page publishes the combined $100–$2,000 band. The process can take two weeks to several months, and the installer usually obtains the permits — confirm with the local authority first.

How much does tennis court maintenance cost?

About $1,800 a year on average (Fixr); grass is the highest-maintenance surface and acrylic the lowest. Resurfacing runs $4,000–$10,800 every 4–10 years (HomeGuide), resealing asphalt $1,200–$1,700 and repainting $4,000–$9,000. Clay needs regular raking and brushing; grass needs daily mowing and watering and cannot be used on damp or rainy days.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Tennis Court Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

A large hot tub on a covered terrace overlooking a lake

Swim Spa Installation Cost

$20,000 – $40,000

Installing a swim spa — a self-contained swim-current pool, 10–21 ft long, delivered and set on a reinforced pad with a 220V hookup — typically costs $20,000–$40,000, with most homeowners paying around $22,500.

An empty pickleball court with blue and green acrylic surfaces and a net

Pickleball Court Installation Cost

$20,000 – $50,000

Building a pickleball court — a new outdoor court on a 30' x 60' concrete pad with a colored acrylic surface, a permanent net and basic fencing — typically costs $20,000–$50,000, with most homeowners paying around $34,000, the national average named by both HomeGuide and Angi.

A rectangular inground swimming pool in a sunny garden

Pool Liner Replacement Cost

$3,000 – $5,500

Replacing an inground vinyl pool liner — a standard rectangular pool, professionally installed with a new 20/27-mil liner, the pool drained, the old liner removed and the pool refilled with city water — typically costs $3,000–$5,500, with most homeowners paying around $4,250, the midpoint of the overlap band published by HomeGuide, Swimply and Pool Warehouse.

Aerial view of a deserted outdoor basketball court with painted lines and a floodlight pole

Basketball Court Installation Cost

$15,000 – $60,000

Building a backyard basketball court — a finished outdoor court with an engineered base, a multi-coat acrylic surface, painted lines and an in-ground hoop — typically costs $15,000–$60,000, with most homeowners paying around $39,400, the national average Angi names for a standard full-size court. A basic 30' x 30' half court starts much lower, at $3,600–$14,400 (HomeGuide; Angi) — the gap is build standard, not a pricing error.

A bright sunroom with floor-to-ceiling windows and a light wood floor

Three-Season Porch Installation Cost

$10,000 – $40,000

Enclosing a porch as a three-season room — glass windows in place of screens, a solid roof, finished flooring and electrical, with no insulation and no heating — typically costs $10,000–$40,000, with most 200 sq ft conversions landing around $23,000, the midpoint of the band the published guides agree on. Large or custom builds can reach $55,000 (Angi).

A quiet rectangular backyard pool with a deck, a lounger and a hedge

Saltwater Pool Conversion Cost

$1,000 – $2,500

Converting a chlorine pool to saltwater — a salt chlorine generator (control panel + cell) plumbed into the pool's return line, professionally installed, plus the initial load of pool-grade salt — typically costs $1,000–$2,500, with Angi's 2026 national average at $1,000. No draining is needed, and the pool still uses chlorine — the generator makes it on site from the salt.