Pool Liner Replacement cost at a glance
- Typical range: $3,000 – $5,500
- Most homeowners pay: around $4,250
Cross-checked against five published sources for this project. Sources used for this page: Angi, How Much Does a Pool Liner Replacement Cost? [2026 Data] (updated Oct 29, 2026; 1,672 verified projects — national average $2,588, typical $1,245-$3,977, ALL pool types incl. above-ground; inground liner material $1,200-$2,100, above-ground $500-$900; ~$5/sq ft; liner by type beaded $500-$1,000, overlap $200-$600, uni-bead $400-$900; inground labor $1,000-$2,500, above-ground $250-$800; thicker liner +$300-$500; drain $500-$700, fill $90-$270, permits $150-$300, disposal $75-$150; repair $100-$500, avg ~$300; lifespan 10-15 years with proper maintenance, as little as 5-9 years neglected; job 1-4 days; do NOT install a new liner over an old one); HomeGuide, How Much Does Pool Liner Replacement Cost? (2026) (published Oct 14, 2022, updated Nov 28, 2023 — STALE despite the (2026) title, oldest data point; installed totals all pools to 800 sq ft $2,000-$7,500, inground $3,000-$7,500; size table installed 14x28 $2,500-$3,000, 16x28 $3,000-$3,200, 16x33 $3,700-$4,200, 18x36 $5,200-$6,000, 20x40 $7,500-$8,000; thickness upgrade +$700-$1,000; refill $30-$100 per 1,000 gal by truck, $4-$10 by hose; permits $100-$300 only if structural work; patch $150-$300 pro; lifespan 5-15 years; install 5-9 hours rectangular ideal, up to 4 days curved/structural; new-over-old allowed ONLY on a sand bottom); Pool Warehouse, The Ultimate Guide to Vinyl Inground Pool Liners: Cost, Lifespan, Patterns, and Maintenance (published Mar 11, 2026 — total pro replacement $4,000-$9,000; itemized 16x32 total $4,400-$10,700+: liner $1,500-$3,500, labor $2,000-$4,500, trucked refill $600-$1,200, extras $300-$1,500+; 27-mil upgrade +$800-$1,500; lifespan 10-15 years well maintained, up to 20 years meticulous; DIY high-risk — a 1-inch measurement error can ruin a $2,000 custom liner, manufacturers take no returns; 27-mil liner for a 20x40 pool weighs 400+ lbs, needs 3-5 people); Swimply, Pool Liner Replacement Cost: The 2026 Guide (no date shown — most projects $1,200-$7,500; inground standard rectangular $3,000-$5,500, large/custom $6,500-$9,000+; inground liner $1,200-$2,100 standard, to $4,000 premium 30-mil; labor inground $1,000-$2,500; total with refill $4,000-$6,500; custom fabrication +$500-$1,500; thickness upgrade +$200-$700; refill $60-$350 city / $400-$900 trucked; startup chemicals $80-$200; disposal $75-$200; spot repairs $150-$600, full floor rebuild $1,200-$3,000; ~$5/sq ft; lifespan inground 5-12 years; its $2,585 national average mirrors Angi's $2,588 and is almost certainly derived from it). Disagreements flagged, not averaged away: total price level (Angi's average is dragged down by above-ground jobs; Pool Warehouse runs ~$1,000-$2,000 higher, driven by its $2,000-$4,500 labor band vs $1,000-$2,500 elsewhere); refill hose vs trucked water are different prices, not blended; thickness upgrade +$200-$700 to +$800-$1,500 across sources; lifespan 10-15 years well maintained vs 5-12 years inground; job time 1-4 days total vs 5-9 hours install-only; new-over-old Angi never vs HomeGuide sand-bottom exception. No Fixr pool-liner page could be found; Forbes Home and CostHelper were not consulted. Most-pay $4,250 is the midpoint of the $3,000-$5,500 overlap band, labelled as such — NOT a published average. Worked example and shares are derived from the source ranges, not published percentages. Checked November 2026.. Sources last checked: October 2026 — Forbes Home, HomeGuide, Fixr, Angi, CostHelper. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Budget — small rectangular pool | $2,500 – $3,500 | A small rectangular inground pool (for example 14x28 ft), standard 20-mil plain-pattern liner, professional installation, city-water (hose) refill, no floor or coping work. Grounded in HomeGuide's 14x28 inground price of $2,500–$3,000 and the low end of Angi's typical range. |
| Mid-range — standard pool, the typical job | $3,500 – $5,500 | A standard 16x32 to 18x36 ft rectangular inground pool, 20/27-mil patterned liner, professional installation including draining, old-liner removal and disposal, new gaskets, city-water refill and water balancing. Grounded in Swimply's standard inground band of $3,000–$5,500 and HomeGuide's 16x33 inground price of $3,700–$4,200. |
| Premium — large or custom pool | $5,500 – $9,000 | A large (20x40 ft or bigger) or custom/freeform pool, premium 27–30-mil liner, custom fabrication (+$500–$1,500, Swimply), floor or vermiculite repairs or a full floor rebuild ($1,200–$3,000, Swimply), coping or track work, and trucked-water refill ($400–$1,200). Grounded in Swimply's large/custom band of $6,500–$9,000+, Pool Warehouse's $4,000–$9,000 range and HomeGuide's 20x40 inground price of $7,500–$8,000. Costs can exceed $9,000 when major base repairs are needed (Pool Warehouse's itemized 16x32 ceiling is $10,700+). |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Liner material (20/27-mil, standard pattern) | 38% of total | $1,600 for a standard-pattern 20/27-mil liner for a 16x32 ft pool. Angi and Swimply both price a standard inground liner at $1,200–$2,100; Pool Warehouse prices liners at $1,500–$3,500. Share derived from the worked example below. |
| Labour & installation | 40% of total | $1,700 for draining, removing the old liner, fitting and vacuum-setting the new one. Angi and Swimply both price inground labour at $1,000–$2,500; Pool Warehouse prices it at $2,000–$4,500 because its labour explicitly includes minor floor repairs and vacuum-method install. Share derived from the worked example below. |
| Drain pool & old-liner disposal | 14% of total | $600 — draining the pool ($500; Angi prices draining at $500–$700) plus old-liner disposal ($100; Angi $75–$150, Swimply $75–$200). Share derived from the worked example below. |
| Water refill (city water, hose) | 6% of total | $250 to refill about 20,000 gallons by garden hose. Angi prices filling at $90–$270 and Swimply city water at $60–$350; trucked water is the expensive outlier at $400–$900 (Swimply) to $600–$1,200 (Pool Warehouse). Share derived from the worked example below. |
| New gaskets & startup chemicals | 2% of total | $100 for new gaskets and startup chemicals. Swimply prices startup chemicals at $80–$200; gaskets are often included in the labour quote. Share derived from the worked example below. |

What moves the price most
Scope first: this page covers INGROUND vinyl liner replacement only. Angi's often-quoted $2,588 national average covers ALL pool types including cheap above-ground jobs ($500–$900 liners), so it understates a typical inground job by about $1,700 and is cited here only with that scope stated. Pool size drives the total: HomeGuide's installed prices by size are 14x28 ft $2,500–$3,000, 16x28 $3,000–$3,200, 16x33 $3,700–$4,200, 18x36 $5,200–$6,000 and 20x40 $7,500–$8,000. Angi prices the job at about $5 per sq ft. Liner type: beaded liners run $500–$1,000, overlap $200–$600 and uni-bead $400–$900 for the material (Angi). Thickness upgrade: sources disagree widely — +$200–$700 (Swimply), +$300–$500 (Angi), +$700–$1,000 (HomeGuide) and +$800–$1,500 for a full 27-mil upgrade (Pool Warehouse) — so this page publishes “$300–$1,000 more in most quotes, up to $1,500 for a full 27-mil upgrade” and names the spread. Labour: $1,000–$2,500 for install alone (Angi; Swimply agrees exactly), while Pool Warehouse's $2,000–$4,500 includes minor floor repairs and vacuum-method install — floor prep can push labour toward $4,500. Water refill is two different prices: by hose $90–$270 (Angi) or $60–$350 city water (Swimply), versus trucked water $400–$900 (Swimply) to $600–$1,200 for a 20,000-gallon truck refill (Pool Warehouse); do not blend them into one number. Lifespan: 10–15 years with good water chemistry and maintenance (Angi; Pool Warehouse); as little as 5 years if chemistry is neglected. Job time: the install itself takes about 5–9 hours for a rectangular pool up to 800 sq ft in ideal conditions (HomeGuide), but the whole project — drain, prep, install, refill — typically takes 1–4 days (Angi), and up to 4 days if the pool is curved or needs structural or floor repairs. New liner over the old one: Angi says never — the drained old liner dries out and turns brittle, which damages the new one — while HomeGuide allows one exception, a sand-bottom pool where the old liner helps hold the shape, but says the new liner lasts longer if the old one is fully removed first. Removing the old liner is the safer default. Patch or replace: a professional patch costs $100–$500 (Angi; $150–$300 per HomeGuide) or $20–$100 for a DIY kit, and patching makes sense if the liner is under 5–7 years old with one or two small tears away from seams, corners and fittings; once it is 8+ years old with several patches, major tears, brittleness or wrinkles, replacement is the better spend. DIY warning: a 1-inch measuring error can ruin a $2,000 custom-cut liner, which manufacturers will not take back, and a 27-mil liner for a 20x40 pool weighs over 400 lbs and needs 3–5 people to handle (Pool Warehouse); DIY can also void the liner warranty. Source notes: HomeGuide's page was last updated in November 2023 despite its “(2026)” title, so it is the oldest data point here; Swimply's $2,585 “national average” mirrors Angi's $2,588 and is almost certainly derived from it, not a second independent average. No source prices coping, wall foam, main-drain or gasket-only work on its own, and no source gives a regional labour table for liner work specifically. Worked example at the most-pay figure: a standard 16x32 ft rectangular inground pool, pro-installed 20/27-mil patterned liner, city-water refill — liner material $1,600 + labour and installation $1,700 + drain pool and old-liner disposal $600 + water refill $250 + new gaskets and startup chemicals $100 = $4,250. Trucked water ($400–$1,200) instead of a hose refill would push this same job to roughly $4,800–$5,200. For the pool itself, see our pool installation guide; for heating it, see our pool heater installation guide; for the deck around it, see our pool deck installation guide; for the hot tub beside it, see our hot tub installation guide; for the swim spa alternative, see our swim spa installation guide; and for the deck it may share a yard with, see our deck building guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does it cost to replace an inground pool liner?
A standard rectangular inground vinyl liner replacement typically costs $3,000–$5,500 professionally installed, with larger or custom-shaped pools reaching $6,500–$9,000 or more (Swimply; HomeGuide inground $3,000–$7,500). The often-quoted $2,588 national average (Angi, 1,672 projects) covers all pool types including cheap above-ground jobs, so it understates a typical inground job.
How long does a vinyl pool liner last?
10–15 years with good water chemistry and maintenance (Angi; Pool Warehouse). Neglected liners — poor pH or chlorine balance, heavy UV exposure — can fail in as little as 5 years, while meticulously cared-for liners can reach 20 years (Pool Warehouse; HomeGuide 5–15 years; Swimply 5–12 years inground).
How long does it take to replace a pool liner?
The install itself takes about 5–9 hours for a rectangular pool up to 800 sq ft in ideal conditions (HomeGuide), but the whole project — drain, prep, install, refill — typically takes 1–4 days (Angi), and up to 4 days if the pool is curved or needs structural or floor repairs (HomeGuide).
Can I replace an inground pool liner myself?
It is possible but not recommended for inground pools. You would save roughly $30–$50 per hour in labour (Angi) but still pay $300–$1,000 for the liner, draining and refilling — and a 1-inch measuring error can ruin a $2,000 custom-cut liner, which manufacturers will not take back (Pool Warehouse). DIY can also void the liner warranty, and a 27-mil liner for a 20x40 pool weighs over 400 lbs and needs 3–5 people to handle (Pool Warehouse). Above-ground liners are the DIY-friendly exception (Swimply).
Can you put a new pool liner over the old one?
Usually no. Angi advises against it because the drained old liner dries out and turns brittle, which damages the new liner. HomeGuide allows one exception — a sand-bottom pool, where the old liner helps hold the shape — but says the new liner lasts longer if the old one is fully removed first. Removing the old liner is the safer default.
Is it worth patching a pool liner instead of replacing it?
Yes, for minor damage on a young liner. A professional patch costs $100–$500 (Angi; $150–$300 per HomeGuide) or $20–$100 for a DIY kit, and patching makes sense if the liner is under 5–7 years old with one or two small tears away from seams, corners and fittings. Once the liner is 8+ years old, has several patches, major tears, brittleness or wrinkles, replacement is the better spend (Angi; Swimply; HomeGuide).






