Chimney Liner Replacement cost at a glance
- Typical range: $1,500 – $5,000
- Most homeowners pay: around $2,500 (Angi)
Cross-checked against two published sources for this project. Sources used for this page: HomeGuide's chimney liner cost guide (updated February 2026), Flue-Pipes' 2026 chimney liner cost guide and Angi's chimney liner cost guide (updated September 2026). Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Stainless steel reline — the common job | $900 – $3,800 | HomeGuide’s installed band; Flue-Pipes: pro stainless reline $1,500–$3,800; Angi’s typical band $1,500–$5,000 — flexible liners feed down existing chimneys without opening walls |
| Clay / terracotta tile replacement | $2,000 – $3,500 | HomeGuide and Flue-Pipes agree; cheap tiles ($6–$15/ft) but labor-heavy — walls must be opened to set them |
| Cast-in-place / ceramic liner | $2,000 – $7,000 | HomeGuide and Flue-Pipes agree; the structural option for deteriorated masonry, lasting 50 years |
| Complex reline — tall, bends, repairs first | $3,800 – $8,500+ | Flue-Pipes: complex jobs reach $7,000+; breaking out old clay tile is the single biggest legitimate addition |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Stainless liner materials | $20 – $90/ft | HomeGuide per-foot materials: rigid $30–$50, flexible $20–$90; single-wall installed $35–$70/ft, double-wall $50–$160/ft |
| Clay and cast-in-place materials | $6 – $120/ft | Clay $6–$15/ft, cast-in-place $40–$120/ft, aluminum $5–$30/ft (gas only), ceramic/Thermocrete $50–$200/ft (HomeGuide) |
| Installation labor | $400 – $4,000 | HomeGuide $500–$4,000; Angi $400–$1,250; Flue-Pipes: labor is 40–60% of the professional price — the only published labor share |
| Removing the old liner | $250 – $2,500 | Steel $250–$800, clay tiles $500–$2,500 (HomeGuide) — Flue-Pipes prices removal at $500–$1,500, a genuine disagreement on clay’s top end |
| Inspection, permits, extras | $100 – $600 | Level 2 camera inspection $100–$600 (HomeGuide) / $150–$500 (Flue-Pipes) / $450 average (Angi); pre-install sweep ~$255 (Angi); permits $100–$150+ (HomeGuide); insulation $8–$15/ft |
| Masonry add-ons | $500 – $3,500 | Re-bricking the stack above the roofline $1,000–$3,500 (HomeGuide, single-source); partial stack removal $500–$2,500 — relining starts only when the masonry is sound |

What moves the price most
Liner material sets the band — stainless ($900–$3,800 installed) is the common job; clay and cast-in-place ($2,000–$7,000) cost more in labor and materials. Chimney height and diameter scale the materials: a 35-foot run costs roughly double a 15-foot one, and 6-inch liners cost 20–30% more than 5-inch (Flue-Pipes). Number of flues and appliance connections multiplies the work. Roof height, pitch and access — scaffold or lift hire — push labor up. Breaking out the old clay flue is the single biggest legitimate addition (Flue-Pipes). Crown and mortar repairs come first and are itemized separately. Insulation ($8–$15/ft) is code-required for solid-fuel burning in many cases. On DIY: Flue-Pipes sells kits from $559 (total DIY $500–$1,200 vs $1,500–$3,800 pro), but HomeGuide notes many states’ building codes prohibit DIY liner installation — check yours.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does chimney liner replacement cost?
A standard professional reline runs $1,500–$5,000 and averages $2,500 — Angi’s national figure (updated September 2026), the only published national average. HomeGuide averages relining at $1,200–$4,600 (February 2026); Flue-Pipes prices a pro stainless reline at $1,500–$3,800.
How much does a stainless steel chimney liner cost?
$900–$3,800 installed (HomeGuide). Materials run $20–$90 per foot; labor adds $500–$1,500 on stainless jobs. It’s the most common and installer-recommended choice.
How long does a chimney liner last?
Stainless steel: 15–20 years (Angi; HomeGuide’s chart stretches to 25). Clay/terracotta: up to 50 years. Cast-in-place: up to 50 years. Aluminum: 5–15 years, and gas appliances only (HomeGuide).
What are the signs my chimney liner needs replacing?
Cracked or deteriorating liner, corrosion or warping, drafting or smoke problems, broken clay pieces in the firebox, and unusual smells (HomeGuide). White efflorescence on the brick or a chimney-fire history also count — even a small fire can crack tiles.
How long does chimney relining take?
4–8 hours for a typical single-flue reline; several days for multiple flues or masonry repairs (HomeGuide). A DIY kit takes about a day with a helper (Flue-Pipes).
Can I install a chimney liner myself?
DIY kits start at $559 and a careful DIY totals $500–$1,200 against $1,500–$3,800 pro (Flue-Pipes) — but HomeGuide notes many states’ building codes prohibit DIY liner installation, and roof work needs real safety setup. The camera inspection ($150–$500) is the step that tells you whether your chimney is a DIY candidate at all.






