Solar Tube Installation cost at a glance
- Typical range: $600 – $1,000
- Most homeowners pay: around $850
- Prices vary most by: Installation labor (40–50% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Angi's solar tube cost guides, updated July 9 and August 4, 2026 (solar tube installation $600–$1,000; skylights $500–$3,000 by comparison); HomeGuide's skylight guide (tubular sun-tunnel unit $150–$500, installed $500–$1,000; fixed skylight installed $1,500–$4,000; full skylight $1,600–$4,200 installed) and its solar tube guide (average $850, average range $600–$1,000, comparison range to $1,100; kit $200–$500+; roof-material adapter $100–$150+); EngineerFix's solar tube guides (average professionally installed tube $600–$1,100 including materials and labor; kit $200–$500, 10-inch $150–$350, 14-inch $400–$550; labor $300–$700 per tube, $50–$120 per hour; 14-inch suits spaces up to about 300 square feet). Typical band = the three-way overlap of Angi, HomeGuide and EngineerFix; most-pay = HomeGuide's published average.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Small 10-inch tube, short straight run | $500 – $700 | The cheap end: HomeGuide prices tubular units at $150–$500 and installed tubular skylights from $500, so a small tube on a simple asphalt roof with a short run lands here — one bathroom or hallway lit for the price of a fixture |
| Standard 14-inch tube — the typical job | $600 – $1,000 | The shared band itself: Angi's $600–$1,000, HomeGuide's $850 average inside $600–$1,000, and EngineerFix's $600–$1,100 — a mid-size tube, kit plus labor, flashed and trimmed on a standard roof |
| Large 18-inch tube, long run, or tile or metal roof | $1,000 – $1,500 | The expensive end: HomeGuide prices a roof-material adapter at $100–$150+ on tile or metal roofs, EngineerFix prices labor at $300–$700 for a straightforward tube and more where the run is long or vaulted, and larger kits run $500+ before labor |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Tube kit, dome and diffuser | 30–40% of total | The hardware: HomeGuide prices solar tube kits at $200–$500+ by brand and size, and EngineerFix prices 10-inch kits at $150–$350 against $400–$550 for 14-inch — diameter is the kit's price |
| Installation labor | 40–50% of total | The fitting: EngineerFix prices labor at $300–$700 for a standard tube, or $50–$120 per hour — roof work, tube assembly and ceiling trim, longer where the run bends around framing |
| Flashing, adapters and roof work | 10–20% of total | The watertight part: flashing for the roof type, with HomeGuide pricing a special adapter at $100–$150+ on tile, metal or slate roofs — the line that decides whether the tube ever leaks |
| Tunnel extensions, trim and extras | 5–10% of total | The tail: extra tunnel sections for long runs, a finished ceiling trim ring, and an optional electric light kit for nighttime use |

What moves the price most
Diameter is the first driver. HomeGuide prices kits at $200–$500+ and EngineerFix prices a 10-inch kit at $150–$350 against $400–$550 for a 14-inch kit — a bigger tube lights a bigger room but costs more before labor starts. Roof material is second: asphalt is the standard flashing, while HomeGuide prices a special adapter at $100–$150+ for tile, metal or slate, with extra labor on top. Tube length and bends are third: a short straight run from roof to ceiling is the typical job, while a long run or a vaulted ceiling needs extensions and more fitting time, which is EngineerFix's $300–$700 labor band stretching upward. Finally, what you compare it against: HomeGuide prices a full skylight at $1,600–$4,200 installed, so a tube at $600–$1,000 is the budget daylight option — see our skylight installation guide for the full-skylight job, and our skylight repair guide if an existing unit is the problem.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does it cost to install a solar tube?
Typically $600–$1,000 for one standard tube, professionally installed, with about $850 the figure most jobs land near — HomeGuide's national average of $850 inside its $600–$1,000 band, against Angi's $600–$1,000 and EngineerFix's $600–$1,100.
Solar tube or skylight — which should I choose?
A tube when the room just needs light: it costs $600–$1,000 installed against HomeGuide's $1,600–$4,200 for a full skylight, needs a much smaller roof opening, and fits rooms where a skylight shaft cannot. A skylight when you want a view of the sky, an opening window, or a large shaft of light — a tube gives daylight, not a view. See our skylight installation guide for that comparison in full.
What size solar tube do I need?
Match the tube to the room: EngineerFix prices a standard 10-inch tube for a bathroom or small interior room, and a 14-inch tube for spaces up to about 300 square feet. Bigger rooms need either a larger tube or two tubes — one small tube in a big room is the most common disappointment in this job.
Will a solar tube leak?
Not when it is flashed properly: the flashing and roof adapter are the 10–20% line in this guide's breakdown, and HomeGuide prices a special adapter at $100–$150+ for tile or metal roofs. A cheap install that skips the right flashing is the one that leaks — and HomeGuide notes a DIY install can void the roof warranty, while a professional install is usually honored.
Does a solar tube work at night or on cloudy days?
No — a tube carries daylight, so it dims on cloudy days and goes dark at night. That is the trade against a skylight's larger glass area too: both are daylight-only. Optional electric light kits fit inside the diffuser for nighttime use, priced as an extra on top of the installed band.
Can a solar tube light a windowless bathroom?
Yes — it is the classic use case: a 10-inch tube on a short run brings daylight into a bathroom, hallway or closet with no window and no wall to cut. It needs roof access directly above or near the room, though — a long horizontal run to reach a far room pushes the job toward the $1,000–$1,500 tier.






