Home › Cost Guides › Fireplace Remodel
Cost Guide

How Much Does a Fireplace Remodel Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$400 – $2,000
Most homeowners pay around $1,200 · A standard fireplace remodel — refacing the surround of an existing fireplace with new material, refreshing the mantel and hearth, with no structural rebuild
typical
$400$2,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Bright living room with a lit brick fireplace, white mantel and TV above it, sofas, coffee table and rug

Fireplace Remodel cost at a glance

  • Typical range: $400 – $2,000
  • Most homeowners pay: around $1,200
  • Prices vary most by: Surround materials (30–50% of the budget)

Cross-checked against four published sources for this project. Sources used for this page: Angi's fireplace remodel cost guide, updated September 18, 2026 (national average $1,200, most $400–$2,000; refacing $600–$4,500, average about $1,100; full replacement $2,000–$5,000 or more; mantel $1,000–$5,000, custom $2,000–$5,000, prefabricated wood $300–$2,000, marble or limestone $8,000–$20,000, cast stone $500–$5,000; hearth $3–$200 per square foot; insert $700–$6,500; crack repair $200–$1,000; painting $350–$650; converting to gas $3,000, range $500–$5,500; rebuilding $1,000–$3,500; repair average about $600, range $200–$1,000; removal $7,000 full, $1,250 partial; materials per square foot: brick $3–$10, tile $1–$40, mosaic $30–$50, marble tile to $350, wood paneling $2.50–$40, stone $60–$70, stone veneer $11–$18), HomeGuide's fireplace remodel cost guide, updated January 9, 2026 (refacing $600–$4,500; full replacement $2,400–$8,100; mantel alone $500–$5,000; paint $350–$650; reface by material installed per square foot: brick $25–$50, concrete $5–$25, stone $50–$150, tile $10–$50) and This Old House's guide to refacing a fireplace surround and hearth, updated May 27, 2026 (reface cost $650–$4,000, 6–8 hours). HomeAdvisor corroborates (remodel $400–$2,000, average $1,200; handyperson $50–$150 per hour; firebox fix or swap $160–$3,500). Synthesized typical = Angi's and HomeAdvisor's most-pay band at $400–$2,000, with $1,200 most-pay at Angi's published national average. Checked November 2026.. Sources last checked: October 2026 — This Old House, HomeAdvisor, HomeGuide, Angi. How we calculate these costs

Cost by scope

Fireplace Remodel cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — paint and minor refresh$350 – $650Angi and HomeGuide both price painting a fireplace at $350–$650 — heat-resistant paint over sound brick, or a tidy-up of the existing surround.
Standard — reface with tile, brick or stone veneer$600 – $4,500The typical project on this page: Angi prices refacing at $600–$4,500 with an average of about $1,100, HomeGuide at the same $600–$4,500, and This Old House at $650–$4,000.
Premium — full replacement with new insert and custom mantel$2,400 – $8,100HomeGuide prices a full replacement at $2,400–$8,100; Angi prices a full replacement at $2,000–$5,000 or more, with an insert at $700–$6,500 and a custom mantel at $2,000–$5,000.

Where the money goes

Part of the jobShareNote
Surround materials30–50% of totalAngi prices refacing materials at $3–$10 per square foot for brick, $1–$40 for tile, $11–$18 for stone veneer and $60–$70 for stone; HomeGuide prices the same materials installed at $25–$50 for brick, $10–$50 for tile and $50–$150 for stone
Labor30–50% of totalHomeAdvisor prices a handyperson at $50–$150 per hour for smaller jobs, and Angi prices two installers at four days and $2,000–$5,000 for a custom surround
Mantel10–25% of totalHomeGuide prices a mantel alone at $500–$5,000 and Angi at $1,000–$5,000; a prefabricated wood mantel is $300–$2,000 in both guides
Hearth, repairs & permits5–15% of totalAngi prices a hearth extension at $3–$200 per square foot and crack repair at $200–$1,000; a partial fireplace removal is $1,250 and a full removal $7,000
Surround materials · 30–50%Labor · 30–50%Mantel · 10–25%Hearth, repairs & permits · 5–15%
Estimator’s note: on a fireplace remodel, surround materials is usually where quotes swing most (30–50% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A stone fireplace with a wooden mantel and built-in shelves: Angi prices stone at $60–$70 per square foot and stone veneer at $11–$18 — the material is the first price lever on this page
A stone fireplace with a wooden mantel and built-in shelves: Angi prices stone at $60–$70 per square foot and stone veneer at $11–$18 — the material is the first price lever on this page

What moves the price most

Material is the first lever: Angi prices brick at $3–$10 per square foot, tile at $1–$40, stone veneer at $11–$18 and stone at $60–$70 — the same surround can cost ten times more in stone than in brick, and HomeGuide's installed figures tell the same story at $25–$50 for brick against $50–$150 for stone. Scope is second: painting is $350–$650 in both Angi's and HomeGuide's data, refacing is $600–$4,500, and a full replacement is $2,400–$8,100 in HomeGuide's — most remodels are refaces, not rebuilds. The mantel is third: a prefabricated wood mantel is $300–$2,000 in both guides, while a custom mantel runs $2,000–$5,000 in Angi's — the mantel is the single most visible line on the quote. A gas conversion is fourth: Angi prices converting a wood-burning fireplace to gas at $3,000 on average, ranging $500–$5,500, and every guide says gas work belongs to a licensed pro. Worked example at the most-pay figure: surround materials $450 + labor $500 + mantel refresh $150 + hearth and paint touch-up $100 = $1,200. For a brand-new fireplace instead of a remodel, see our fireplace installation guide and our fireplace repair guide, and for the mantel alone see our fireplace mantel installation guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Logs burning behind a mesh screen: the firebox itself is rarely the cost — Angi prices a firebox fix or swap at $160–$3,500, against $600–$4,500 for refacing
Logs burning behind a mesh screen: the firebox itself is rarely the cost — Angi prices a firebox fix or swap at $160–$3,500, against $600–$4,500 for refacing

Frequently asked questions

How much does it cost to remodel a fireplace?

Typically $400–$2,000, averaging $1,200 in Angi's 2026 data — and HomeAdvisor reports the same $400–$2,000 band with the same $1,200 average.

How much does it cost to reface a fireplace?

Refacing runs $600–$4,500 in both Angi's and HomeGuide's data, averaging about $1,100; This Old House prices the same job at $650–$4,000.

What is the cheapest way to remodel a fireplace?

Painting it: $350–$650 in both Angi's and HomeGuide's data, using heat-resistant paint — the one part of a fireplace remodel most guides say a homeowner can do themselves.

How much is a new mantel?

$500–$5,000 in HomeGuide's data and $1,000–$5,000 in Angi's; a prefabricated wood mantel is $300–$2,000, while a custom mantel runs $2,000–$5,000. See our fireplace mantel installation guide.

How much does it cost to convert a fireplace to gas?

About $3,000 on average in Angi's data, ranging $500–$5,500 depending on the unit — and gas work is the one part every guide says to leave to a licensed pro. See our fireplace installation guide for a new gas unit.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Fireplace Remodel cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Living room with a vaulted wood-plank ceiling and built-in shelving

Skylight Installation Cost

$1,500 – $2,800

The typical project is one standard fixed skylight cut into a sloped shingle roof, deck- or curb-mounted with the flashing kit made for that roof covering. Work that must cross an attic inside a framed and finished chase, and large or venting units, price above the band.

Circular skylight framing blue sky and clouds

Solar Tube Installation Cost

$600 – $1,000

Solar tube installation typically costs $600 – $1,000 for one standard tube, professionally installed, with about $850 the figure most jobs land near — HomeGuide's national average is $850 inside its $600–$1,000 band, and Angi prices installation at $600–$1,000. A solar tube — also called a sun tunnel or tubular skylight — is a roof dome, a reflective tube and a ceiling diffuser that pipes daylight into a windowless room, for roughly a third of a full skylight's price.

Entry hall with hardwood floors, a staircase and white baseboards along every wall

Baseboard Installation Cost

$900 – $1,500

The typical project is about 150 linear feet of standard painted baseboard across a few rooms — about $6–$9 per linear foot installed. Tall profiles, hardwood species, lots of corners and a separate painting bill are what push a trim job above the band.

Living room with white flat-panel wainscoting on the walls and a leather sofa

Wainscoting Installation Cost

$1,300 – $2,500

The typical project is one standard room with about 100 square feet of wainscoting — panels about 3 to 3.5 feet high in a flat-panel, beadboard or board-and-batten style, painted. Raised-panel and overlay work, solid hardwoods and multi-room runs are what price above the band.

Room with whitewashed horizontal shiplap plank walls and a matching plank ceiling

Shiplap Installation Cost

$500 – $1,200

The typical project is one accent wall of about 120 square feet in painted pine or MDF shiplap — about $3–$11 per square foot installed across the published guides. Whole rooms, ceilings, exterior walls and premium paneling rates are what push a shiplap job above the band.

Office with a full botanical mural wallpaper wall in black and white

Wallpaper Installation Cost

$400 – $900

The typical project is one accent wall of about 100 square feet in a standard vinyl or non-woven paper, professionally hung on a sound wall. Full rooms, natural-fibre papers and walls that need the old paper stripped first are what move the job above the band.