Home › Cost Guides › Downspout Installation
Cost Guide

How Much Does a Downspout Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$315 – $625
Most homeowners pay around $450 · Installing or replacing 4–5 standard aluminum or vinyl downspouts on a one- or two-story home — the vertical pipes that carry gutter water away from the foundation
typical
$315$625
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Modern house with a downspout running down its side wall

Downspout Installation cost at a glance

  • Typical range: $315 – $625
  • Most homeowners pay: around $450
  • Prices vary most by: Downspouts, elbows, straps and extensions (35–50% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: Angi's downspout installation cost guide, updated September 18, 2026 (national average $670, most $315–$1,070, range $100–$3,265; $6.50–$22.25 per linear foot overall; vinyl $6–$12, aluminum $7–$30, galvanized $7–$22, copper $23–$68 per linear foot; labor 20–50% of total; prep 2–20%; underground +$3–$8 per linear foot; two-story and taller up to 50% more), HomeGuide's downspout cost guide (average $30–$75 per downspout section; replacement of 4–5 downspouts $220–$625; one-story $120–$375, two-story $220–$625, three-story $315–$875; vinyl and aluminum $2–$4 per linear foot installed, copper and zinc $10–$34; seamless $5–$16; buried drainage $150–$350 per downspout), EngineerFix's downspout cost guide (vinyl and aluminum installed $2–$4 per linear foot, galvanized $5–$11, copper $14–$34; flat rate $30–$75 per downspout; labor $1.50–$5.55 per linear foot). Synthesized typical = the Angi most-pay band overlapped with HomeGuide's 4–5 downspout replacement band; $450 most-pay sits inside that overlap. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Downspout Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Vinyl sectional, one-story home$220 – $400Four to five vinyl downspouts on a single-story home: HomeGuide puts one-story replacement at $120–$375 and vinyl installed at $2–$3 per linear foot, with $30–$75 per downspout section including elbows and straps.
Standard aluminum or vinyl, 4–5 downspouts$315 – $625The typical project on this page. Angi's most-pay band is $315–$1,070 and HomeGuide's 4–5 downspout replacement band is $220–$625; the overlap is the band published here.
Copper, seamless or tall-home with buried extensions$1,000 – $2,500Copper installed at $14–$34 per linear foot in HomeGuide and EngineerFix, seamless at $5–$16 in HomeGuide, plus buried extensions at $150–$350 each in HomeGuide — the tier where material and height move the price most.

Where the money goes

Part of the jobShareNote
Downspouts, elbows, straps and extensions35–50% of totalThe pipe itself plus elbows ($3–$8 each in HomeGuide), straps and splash blocks; copper dominates this line
Labor (removal, fitting, ladder and safety work)30–50% of totalAngi puts labor at 20–50% of the project; two-story and taller work costs up to 50% more where special equipment is needed
Removal of old downspouts and prep5–15% of totalTaking down the old runs and repairing gutter damage found underneath; Angi puts prep at 2–20% of project cost
Drainage add-ons (extensions, catch basins, guards)5–15% of totalAbove-ground extensions $5–$20 each in HomeGuide, buried drainage $150–$350 per downspout, gutter guards $15–$45 per linear foot
Downspouts, elbows, straps and extensions · 35–50%Labor (removal, fitting, ladder and safety work) · 30–50%Removal of old downspouts and prep · 5–15%Drainage add-ons (extensions, catch basins, guards) · 5–15%
Estimator’s note: on a downspout installation, downspouts, elbows, straps and extensions is usually where quotes swing most (35–50% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Several downspouts down one wall — the count is the honest unit to compare quotes on, since per-foot rates bundle different things in different guides.
Several downspouts down one wall — the count is the honest unit to compare quotes on, since per-foot rates bundle different things in different guides.

What moves the price most

Count first: most homes need 4–5 downspouts, one every 30–40 feet of gutter in both Angi and HomeGuide, so the count — not the per-foot rate — is the honest unit to compare quotes on. Material is second: vinyl and aluminum install at $2–$4 per linear foot in HomeGuide and EngineerFix, galvanized steel at $5–$11, and copper at $14–$34 — which is why a copper job lands in a different tier entirely. Height is third: HomeGuide's replacement bands run $120–$375 for one-story, $220–$625 for two-story and $315–$875 for three-story homes, and Angi warns of up to 50% more where a crane or special equipment is needed. Where the water goes is fourth: Angi says downspouts should drain 5–10 feet from the house and HomeGuide says 4–6 feet on sloping ground, up to 10 feet on flat or sandy soil — a quote without extensions or buried drainage is not a finished job. For the gutters themselves, see our gutter installation guide, for gutter repairs, see our gutter repair guide, and for guards, see our gutter guard installation guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A downspout outlet up close — extensions should carry water 4–10 feet from the house, and buried drainage runs $150–$350 per downspout in HomeGuide.
A downspout outlet up close — extensions should carry water 4–10 feet from the house, and buried drainage runs $150–$350 per downspout in HomeGuide.

Frequently asked questions

How much does downspout installation cost?

Most standard jobs — 4–5 aluminum or vinyl downspouts on a one- or two-story home — land between $315 and $625, with $450 typical. Angi's broader most-pay band is $315–$1,070 and its national average is $670, but that average includes copper and taller homes; HomeGuide's 4–5 downspout replacement band is $220–$625.

How many downspouts does a house need?

Most homes need 4–5, or about one every 30–40 feet of gutter run, in both Angi and HomeGuide. Roof size, rainfall and gutter size move the count — larger roofs and heavier rain need bigger or more frequent downspouts.

How much do downspouts cost per linear foot?

It depends on what the quote bundles, and the guides disagree here: HomeGuide and EngineerFix put vinyl and aluminum installed at $2–$4 per linear foot, while Angi's material tables run vinyl at $6–$12 and aluminum at $7–$30. Compare project totals for the same downspout count and material, not per-foot rates alone.

Vinyl, aluminum or copper downspouts?

Vinyl is cheapest ($2–$3 per linear foot installed in HomeGuide) but the least durable; aluminum is the standard balance of price and durability; copper costs $14–$34 per linear foot installed but lasts longest and is chosen for looks as much as function.

Should downspouts be buried?

Buried extensions cost $150–$350 per downspout in HomeGuide, or $3–$8 per linear foot extra in Angi, and they move water well clear of the foundation without a surface pipe to mow around. They are worth it where surface extensions would cross a walkway or patio.

Can I install downspouts myself?

Angi says DIY can save up to 50% of the job cost, but the work happens on a ladder at the roofline, which is the safety risk. Ground-level extensions are the realistic DIY part; the vertical runs are usually hired work.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Downspout Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Brick house with a wooden front door with sidelights and a transom

Exterior Door Replacement Cost

$500 – $1,900

Typical cost for one standard single front door, pre-hung and installed — a standard entry runs about $500 – $1,900 installed across the published guides

Stone-look paver patio around a pool with shade sails and loungers

Patio Installation Cost

$2,500 – $6,000

The typical project is a ground-level patio of about 300 square feet in poured concrete or pavers — about $8 – $20 per sq ft installed. Natural stone, raised construction, steps and poor drainage are what move a patio into five figures.

Worker guiding a concrete pump hose over wet concrete

Concrete Patio Installation Cost

$2,000 – $5,000

Concrete patio installation typically costs $2,000 – $5,000 for about 400 square feet (20 by 20 feet) of plain or broom-finished concrete, with about $3,600 the figure most jobs land near — Angi, updated September 23, 2026, puts the national average at $3,557 with most homeowners paying $1,919–$5,393 at $4–$30 per square foot, while HomeGuide prices a 20-by-20 plain patio at $1,600–$4,800 at $4–$12 per square foot and EngineerFix prices a standard broom-finished patio at $6–$13 per square foot. The guides agree on the plain-concrete band; the page's band is the rounded synthesis of the plain and broom bands, and decorative finishes are a separate tier, not part of the typical figure.

Broad concrete steps beside a house, with stone walls, green bushes and ivy

Concrete Steps Installation Cost

$1,800 – $4,500

A poured-in-place set of concrete steps, 5 to 8 steps at 4 feet wide with a standard finish — old steps removed, new steps formed, poured and finished

Worker guiding a concrete pump hose over a reinforced slab

Concrete Sidewalk Installation Cost

$1,500 – $2,800

A concrete sidewalk installation typically costs $1,500 – $2,800 for about 200 square feet of standard 4-inch concrete with a broom finish, with about $2,000 the figure most jobs land near — Angi averages $2,000 for a 200-square-foot walkway inside its $1,600–$2,400 band at about $10 per square foot, and HomeGuide averages $1,400–$3,400 at $7–$17 per square foot. The guides use walkway and sidewalk interchangeably because the materials and process are identical; the finish is what moves a job across the band, not the name.

Patio with an irregular flagstone-like pattern

Stamped Concrete Installation Cost

$3,200 – $7,600

New stamped concrete patio of about 400 sq ft, installed — about $8–$19 per sq ft for a standard pattern and color