Stamped Concrete Installation cost at a glance
- Typical range: $3,200 – $7,600
- Most homeowners pay: around $5,300
- Per square foot: $8–$19 per sq ft
- Prices vary most by: Labor (pour, stamp, finish and seal) (40–55% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: Angi's stamped concrete cost guide, updated September 8, 2026 (national average $5,320, most $2,961–$7,822, about $9–$22 per square foot; basic $8–$12, intermediate $12–$18, complex $18–$28 per square foot; patios $8–$21, driveways $8–$28; labor $5–$15 per square foot; stamped overlay about $3 per square foot on a sound slab; removal $2–$6 per square foot; DIY materials $4–$8 per square foot; reseal every 2–3 years), HomeGuide's stamped concrete cost guide ($8–$19 per square foot on average; 20×20 ft patio $3,200–$7,600, 2-car driveway $6,900–$10,400; basic $8–$13, mid-range $13–$19, high-end $19–$26+ per square foot; stamped overlay systems $6–$20 per square foot), EngineerFix's concrete stamps cost guide (professional installation $7–$28 per square foot, most mid-range projects $9–$16.25; stamped concrete $8–$25 per square foot by pattern complexity and color count). Synthesized typical = HomeGuide's 20×20 ft patio band against Angi's most-pay band; $5,300 most-pay sits near Angi's $5,320 average. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Basic single pattern, one color | $3,200 – $4,800 | A 400 sq ft patio at the basic $8–$12 per sq ft in Angi; one pattern, uniform color, no custom border. |
| Standard patio, pattern and color | $3,200 – $7,600 | The typical project on this page. HomeGuide puts a 20×20 ft stamped patio at $3,200–$7,600, and Angi's most-pay band is $2,961–$7,822 with a $5,320 average. |
| Complex multi-color, borders or driveway-grade | $7,200 – $11,200 | A 400 sq ft slab at $18–$28 per sq ft in Angi's complex tier, against $19–$26+ in HomeGuide's high-end tier; multiple patterns, layered colors and custom borders. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Labor (pour, stamp, finish and seal) | 40–55% of total | Stamping is timed work on setting concrete; Angi puts labor at $5–$15 per sq ft, and a stamped crew places far fewer square feet a day than a plain crew |
| Concrete, color and release agents | 20–30% of total | The slab itself plus integral color or color hardener and release agent; Angi puts DIY materials alone at $4–$8 per sq ft |
| Base prep, forms and reinforcement | 15–25% of total | Excavation, gravel base, forms and mesh or rebar; removal of an old slab runs $2–$6 per sq ft in Angi where it is needed |
| Sealer and finishing | 5–10% of total | The protective sealer coat, reapplied every 2–3 years in Angi's maintenance guidance |

What moves the price most
Pattern complexity is first: Angi's tiers run $8–$12 per sq ft for basic, $12–$18 for intermediate and $18–$28 for complex work, and HomeGuide's run $8–$13 basic, $13–$19 mid-range and $19–$26+ high-end — the number of patterns and colors is the price. Project type is second: Angi prices patios at $8–$21 per sq ft against driveways at $8–$28, because driveways need a thicker, stronger slab. Area is third: HomeGuide's size table runs a 10×10 ft patio at $800–$1,900 against a 20×20 ft patio at $3,200–$7,600 — small jobs carry minimum charges that push the per-foot rate up. Existing slab is fourth: a sound slab can take a stamped overlay — Angi puts it at about $3 per sq ft while HomeGuide's stamped overlay systems run $6–$20 — but a damaged slab needs removal at $2–$6 per sq ft in Angi first. For a plain slab, see our concrete patio installation guide, for a driveway, see our concrete driveway guide, and for resurfacing an existing slab, see our driveway resurfacing guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does stamped concrete cost per square foot?
About $8–$19 per sq ft installed for standard work: HomeGuide's average band is $8–$19 and Angi's is $9–$22. Basic single-pattern work sits at $8–$12, and complex multi-color work runs $18–$28 in Angi.
How much does a stamped concrete patio cost?
A 20×20 ft (400 sq ft) patio runs $3,200–$7,600 in HomeGuide, with $5,300 typical — Angi's most-pay band for stamped projects is $2,961–$7,822 with a $5,320 average.
Is stamped concrete cheaper than pavers or stone?
Yes, for the same look: Angi describes stamped concrete as patterns pressed into wet concrete to mimic stone, brick or wood at lower cost than the real materials, which also need individual setting labor.
Can stamped concrete go over an existing slab?
Yes, if the slab is sound: Angi puts a stamped overlay at about $3 per sq ft, while HomeGuide's stamped overlay systems run $6–$20 per sq ft — the difference is the overlay system and scope, so compare what each quote includes. A cracked or settled slab needs repair or removal first.
How long does stamped concrete last, and what maintenance does it need?
With resealing every 2–3 years in Angi's maintenance guidance, a well-built stamped slab lasts decades; skipping resealing is what fades color and lets the surface wear. Driveways wear faster than patios because of vehicle traffic and turning tires.
Can I stamp concrete myself?
Angi puts DIY materials at $4–$8 per sq ft, but stamping is timed work — the pattern must be pressed before the concrete sets, and a mistimed or misaligned stamp cannot be redone. Most homeowners hire this one and DIY only the resealing.






