Home › Cost Guides › Gutter Guard Installation
Cost Guide

How Much Does a Gutter Guard Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$1,200 – $2,600
Most homeowners pay around $1,500 · The typical project is about 200 linear feet of standard mesh or perforated-metal guards fitted by a local installer, with the gutters cleaned first — priced per linear foot below. The premium national brands sold with lifetime warranties price in a different league and are tiered separately, because averaging them into the typical band is how this project gets misquoted.
typical
$1,200$2,600
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Two-story house with steep shingle gables, metal porch roofs and eaves on several levels

Gutter Guard Installation cost at a glance

  • Typical range: $1,200 – $2,600
  • Most homeowners pay: around $1,500
  • Prices vary most by: Installation labor (40–50% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's gutter guard cost guide, HomeGuide's gutter guard cost guide and This Old House's gutter guard cost data. Sources last checked: October 2026 — This Old House, HomeGuide, Angi. How we calculate these costs

Cost by scope

Gutter Guard Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget screens, foam or brush inserts$400 – $1,000The entry level: guards that sit in or on the gutter rather than sealing it. Angi prices foam inserts at about $2 per foot and brush guards at about $3 per foot before labor, and HomeGuide puts foam at $2–$4 and brush at $3–$5 per foot — cheap because the gutter stays open and still needs periodic cleaning.
Standard mesh or perforated metal, about 200 ft$1,200 – $2,600The typical project on this page. Angi totals 200 linear feet at $1,200–$2,600 installed, at $6–$13 per linear foot across standard guard types, and HomeGuide prices perforated aluminum at $5–$12 per foot installed — two independent datasets over the same job.
Premium micro-mesh and national brands$3,000 – $9,000The brands sold door-to-door with lifetime no-clog warranties. HomeGuide totals a typical home at $3,000–$9,000 at $15–$45 per foot for these systems, This Old House puts professional installation at about $16 per foot and $3,000–$6,000 for 200 feet, and its 2026 survey of national-brand buyers averaged $7,941 for 200 feet.

Where the money goes

Part of the jobShareNote
The guards themselves35–45%Angi prices guard materials at $1–$9 per linear foot by type — vinyl and metal mesh at the bottom, micro-mesh at about $9 — and HomeGuide prices material alone at $0.50–$10.00 or more per foot, which is why the guard type is chosen before the quote, not during it
Installation labor40–50%Ladder work along every eave: Angi prices installation labor at $2–$6 per linear foot of its $6–$13 installed total, and second stories, steep pitches and long runs all price at the top of it
Cleaning & prep before fitting8–12%Guards fitted over full gutters seal the debris in. Angi prices a pre-installation gutter cleaning at $120–$230 and HomeGuide at $100–$250 — a small line that decides whether the system works
Fasteners, end caps & minor repairs3–7%Screws, end caps, miters and the small fixes found on the ladder: Angi prices gutter repairs at $200–$650 where sections, hangers or downspouts need work before guards can be fitted honestly
The guards themselves · 35–45%Installation labor · 40–50%Cleaning & prep before fitting · 8–12%Fasteners, end caps & minor repairs · 3–7%
Estimator’s note: on a gutter guard installation, installation labor is usually where quotes swing most (40–50% of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
The same measurement from above: every roof plane ends in an eave, and HomeGuide prices perforated aluminum guards at $5–$12 per foot installed — the aerial view is how installers estimate the footage before the ladder comes out
The same measurement from above: every roof plane ends in an eave, and HomeGuide prices perforated aluminum guards at $5–$12 per foot installed — the aerial view is how installers estimate the footage before the ladder comes out

What moves the price most

Linear feet is the whole arithmetic. Every source prices this job by the foot — Angi at $6–$13 per linear foot installed for standard guards, HomeGuide's perforated aluminum at $5–$12 — so measure the eaves, not the house: a wide single-story can carry more gutter than a narrow two-story. Guard type is the widest spread in the guide: the same 200 feet runs from foam inserts at about $2 per foot in Angi to national-brand micro-mesh at $15–$45 per foot in HomeGuide, a tenfold range for one roofline. Height and pitch price the labor — second and third stories and steep roofs slow ladder work and are quoted at the top of Angi's $2–$6 labor band. The gutter's condition comes first: guards do not fix sagging, leaking or undersized gutters, and Angi prices the repairs at $200–$650 before a guard quote means anything. Finally, tree cover sets the honest expectation — pine needles defeat basic screens and sit on top of micro-mesh, which is why the guard type should be matched to what actually falls on your roof.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical gutter guard installation budget breaks down

A typical job: 200 linear feet of perforated aluminum guards on a two-story house — gutters scooped and rinsed first, guards screwed (not clipped) under the drip edge, corners mitered, and the downspout openings screened. The budget below totals $1,500 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Guard material (200 ft of perforated aluminum)$600
Installation labor (two stories of ladder work)$675
Gutter cleaning & prep before fitting$150
Fasteners, end caps & minor repairs$75
Total$1,500

What most people get wrong

  • Comparing a per-foot quote without the guard type — the same roofline runs from foam at about $2 per foot in Angi to national-brand micro-mesh at $15–$45 per foot in HomeGuide, so two honest quotes can differ fivefold while describing different products.
  • Letting guards go on over full gutters — Angi prices the pre-install cleaning at $120–$230, and guards fitted over packed debris seal in the weight, the smell and the overflow they were bought to prevent.
  • Assuming guards end maintenance forever — debris sits on top of the guard instead of inside the gutter, and screens under pine trees still need an occasional brush-down; a no-maintenance promise is a sales line, not a product feature.
  • Guarding a gutter that is already failing — guards do not fix sag, pitch or leaks, and Angi prices gutter repairs at $200–$650; fitting $1,500 of guards onto a gutter that needs replacing buys the removal twice.

Costs in your city

Gutter guard pricing is a national product on local ladders. The guards themselves ship at the same price everywhere — Angi's material band of $1–$9 per foot does not change by ZIP — but labor follows your market and your roof: Angi's $2–$6 per foot of labor prices at the top in high-wage metros and on two- and three-story houses everywhere. Tree cover is the local variable that matters most: pine and oak country pushes homeowners toward micro-mesh and its $15–$45 per foot in HomeGuide, while maple-and-lawn suburbs genuinely do fine on standard guards at $6–$13 per foot in Angi. The pre-install cleaning runs $120–$230 in Angi and $100–$250 in HomeGuide in every market. Ask each bidder for the guard type by name, the footage they measured, and whether cleaning is inside the number.

How this estimate was built: gutter guard figures were cross-checked across Angi's gutter guard cost guide (average $1,521 across 3,206 verified projects, most homeowners paying $653–$2,457, $6–$13 per linear foot installed, 200 feet at $1,200–$2,600, labor $2–$6 and materials $1–$9 per foot), HomeGuide's gutter guard cost guide (standard installed types $1–$12 per foot, premium brands $15–$45 per foot and $3,000–$9,000 for a typical home, cleaning $100–$250) and This Old House's published gutter guard data (professional installation at about $16 per foot and $3,000–$6,000 for 200 feet, with its 2026 national-brand survey averaging $7,941 for 200 feet) — so the typical band is the standard-guard overlap of Angi and HomeGuide, and the premium national brands are tiered separately at their surveyed prices instead of being averaged in. Checked October 2026. Full method: How We Estimate Costs.
The eave edge is where the system lives: the guard seals the gutter opening under the roof drip edge, and Angi prices the cleaning done before fitting at $120–$230 — guards fitted over full gutters seal the debris in
The eave edge is where the system lives: the guard seals the gutter opening under the roof drip edge, and Angi prices the cleaning done before fitting at $120–$230 — guards fitted over full gutters seal the debris in

Frequently asked questions

How much does gutter guard installation cost?

Most homeowners pay $1,200–$2,600 for about 200 linear feet of standard guards professionally installed, with $1,500 typical. Angi averages $1,521 across 3,206 verified projects, with most homeowners paying $653–$2,457, and HomeGuide's standard installed types run $5–$12 per foot before the premium brands are counted.

How much do gutter guards cost per linear foot?

Angi prices standard guards at $6–$13 per linear foot installed, with materials at $1–$9 and labor at $2–$6. HomeGuide prices perforated aluminum at $5–$12 per foot installed and basic mesh from $1–$10, while premium micro-mesh brands run $15–$45 per foot — the per-foot figure is meaningless until the guard type is named.

Are premium gutter guard brands worth the price?

They buy finer filtration and a lifetime warranty, not a different gutter. HomeGuide totals national brands at $3,000–$9,000 for a typical home and This Old House's 2026 survey averaged $7,941 for 200 feet, against $1,200–$2,600 for standard guards in Angi — worth it mainly under heavy needle and seed drop, where basic screens genuinely fail.

Do gutter guards mean I never clean gutters again?

No guard ends maintenance entirely, and honest installers say so. Debris sits on top of guards instead of inside the gutter — micro-mesh sheds most of it, screens need an occasional brush or rinse, and Angi still prices routine gutter cleaning at $120–$230 for the houses that need it. What guards end is the packed, overflowing gutter, not the ladder.

Can I install gutter guards myself?

The budget types are made for it: HomeGuide prices guard material alone at $0.50–$10.00 or more per foot, so foam, brush and snap-in screens are a ladder-and-weekend job. The professional price is mostly the working-at-height labor — Angi's $2–$6 per foot — plus fitting, fastening and the cleaning done first.

Before you sign: get the guard type and the measured footage in writing, confirm the gutters are cleaned and any repairs priced before fitting, ask what maintenance the system still needs under your trees, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Gutter Guard Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Brick gabled houses with dark roofs, dormers, gutters and downspouts

Soffit and Fascia Installation Cost

$1,500 – $5,000

Replacing soffit and fascia together on a standard one-story home typically costs $1,500 – $5,000 for about 150 linear feet of roof edge, with about $3,200 the figure most combined jobs land near — HomeGuide prices the whole eave at $9–$34 per linear foot ($1,350–$5,100 at 150 feet), Angi prices vinyl soffit alone at $1,625–$3,500 averaging $2,550 and fascia alone at $1,050–$3,300 averaging $2,500, and ThePricer puts combined replacement at $900–$6,800 for 100–200 feet. This guide prices a combined vinyl or aluminum job — both boards, removal and vents — not gutters, which are priced on their own page.

Wide wooden deck in a rich brown stained finish with a pergola frame and dining set beside a modern house

Deck Staining Cost

$550 – $1,250

The typical project is a wood deck of about 300 to 350 square feet, power washed, stained and sealed in one visit — priced per square foot below. Decks that need stripping and sanding first are a refinishing job at a higher rate and are tiered separately; a deck being built new is priced on the deck building page.

Modern house with a wooden deck and pergola beside a lawn

Deck Cleaning Cost

$100 – $250

Standard professional wash of a typical residential deck, surface and steps

Stone houses with tall masonry chimney stacks and rows of chimney pots against a cloudy sky

Chimney Repair Cost

$200 – $850

The typical project is a common repair found at inspection — a cap, crown sealing, minor repointing or flashing work on a masonry chimney. Repointing a whole stack, replacing a liner and rebuilding above the roofline are different leagues of work and are tiered separately below; installing a fireplace itself is priced on the fireplace installation page.

Brick chimney with metal caps over two flues on a shingle roof

Chimney Cap Installation Cost

$200 – $650

Chimney cap installation typically costs $200 – $650 for a standard prefabricated cap, with about $300 the figure most jobs land near — Angi's national average is $300 inside its $190–$650 most-pay band, and HomeGuide prices prefabricated caps at $200–$650 installed. The cap is a small job with an outsized payoff: it keeps rain, animals and sparks out of the flue, and the labor line is roughly half the bill because the work happens on a roof.

Modern houses with dark shingle gable roofs, white render and wood cladding under a blue sky

Roof Repair Cost

$400 – $2,000

The typical project is a professional repair of one problem area — a leak traced and sealed, a patch of shingles replaced, or flashing renewed — on an otherwise sound roof, at about $3.50–$12 per sq ft of repaired area. Structural work (sagging decks, trusses, widespread rot) is a different league and is tiered separately below; a whole new roof is priced on the roof replacement page.