Home › Cost Guides › Ceiling Beam Installation
Cost Guide

How Much Does a Ceiling Beam Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$1,500 – $6,500
Most homeowners pay around $3,000 · Installing decorative ceiling beams — typically 3–5 polyurethane faux beams in a living or dining room, about 75 linear ft, professionally installed and finished — typically costs $1,500–$6,500, with most homeowners paying around $3,000, about $15–$35 per linear ft installed for faux beams.
typical
$1,500$6,500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Wooden beam ceiling structure seen from below

Ceiling Beam Installation cost at a glance

  • Typical range: $1,500 – $6,500
  • Most homeowners pay: around $3,000

Cross-checked against four published sources for this project. Sources used for this page: Angi, How Much Do Faux Wood Beams Cost to Install? [2026 Data] (updated Oct 21, 2026, published Jul 22, 2025 — typical $1,500-$4,000, national average $3,000, $15-$35 per linear ft installed; small $1,200-$2,000, medium $2,000-$3,500, large $3,500-$5,000; materials polyurethane $15-$25, foam $12-$20, MDF $12-$18, PVC $18-$30, custom solid core $25-$35+ per linear ft; labor $40-$100/hr or $5-$15 per linear ft; finish $2-$5 per linear ft; lighting/fixture cuts $200-$500; hardware $30-$150 each; permits $50-$200; design/site prep $100-$500; DIY $1,300-$3,300 vs pro $2,200-$5,000); Danloader, Planning a Ceiling Upgrade? Here's What Wood Beams Cost in 2026 (2026 guide, no explicit publication date — decorative range $1,500-$6,500; small projects $1,200-$3,000; structural $8,000-$18,000+; faux $15-$35 per linear ft; real wood $26-$37 per linear ft (attributed to Homewyse) and $30-$90 per linear ft by species (pine $20-$40, cedar $30-$60, oak $50-$90); faux $200-$750 per beam; labor $40-$120/hr, faux labor $500-$2,000, real-wood labor $2,000-$6,000, structural labor $6,000-$15,000+; by room size small 150 sq ft $1,200-$3,000, medium 300 sq ft $3,000-$6,000, large 500+ sq ft $6,000-$12,000+); Custom Wall Design / Avileve, Decorative Ceiling Cost Guide for 2025/26 (published Jul 14, 2025, updated Jul 3, 2026 — decorative wood beams $25-$45 per sq ft, installed range $2,500-$6,500+; faux reduces weight and cost while real timber adds authenticity, and real wood requires solid ceiling structure). Danloader's per-linear-foot figures are partly secondhand — its $15-$35 faux figure is attributed to HomeAdvisor and its $26-$37 real-wood figure to Homewyse; HomeAdvisor is the same company as Angi, so it is NOT counted as an independent source — the three independent sources are Angi, Danloader, and Custom Wall Design. Builds and Buys (faux $3-$5 per linear ft installed) and Karma Construction Group (box beams $45-$110+ per linear ft, premium local market) were NOT used for headline figures. HomeGuide has no beam-specific guide — not cited. Structural beams ($8,000-$18,000+) are a different job and are kept out of the typical range. Worked example and shares are derived from the source ranges, not published percentages. Checked November 2026.. Sources last checked: October 2026 — HomeAdvisor, HomeGuide, Angi, Homewyse. How we calculate these costs

Cost by scope

Ceiling Beam Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — 1–2 accent beams, small room$1,200 – $2,0001–2 accent beams in a small room (bedroom, hallway, entryway) in foam or paintable MDF faux beams, often DIY-friendly. Angi's small-project band is $1,200–$2,000; Danloader's small-room band is $1,200–$3,000.
Mid-range — 3–5 faux beams, living or dining room, the typical job$2,000 – $3,5003–5 polyurethane faux beams in a living or dining room, professionally installed and finished. Angi's medium band is $2,000–$3,500; Angi's pro-installed range is $2,200–$5,000.
Premium — real wood beams or a large/vaulted great room$3,500 – $6,500Real wood beams (pine, cedar, or oak) or a large/vaulted great room with 6+ beams, custom stain and finish. Angi's large-project band is $3,500–$5,000; Danloader prices real-wood totals at $2,500–$10,000 and large rooms at $6,000–$12,000+; Custom Wall Design prices decorative wood beams at $2,500–$6,500+. Genuinely structural beams run $8,000–$18,000+ (Danloader) — engineering, permits and reinforcement, not a decorative upgrade, and not in this tier.

Where the money goes

Part of the jobShareNote
Faux polyurethane beams — 5 beams, ~75 LF at ~$18/LF45% of total$1,350 — inside Angi's $15–$25 per linear ft polyurethane band. Share derived from the worked example below, not a published percentage.
Installation labor — carpenter, ~12 hours35% of total$1,050 — Angi prices labor at $40–$100 an hour. Share derived from the worked example below, not a published percentage.
Stain, finish and touch-up — ~$4/LF10% of total$300 — inside Angi's $2–$5 per linear ft finish band. Share derived from the worked example below, not a published percentage.
Mounting rails, fasteners, corbels/hardware6% of total$180 — Angi prices hardware at $30–$150 each. Share derived from the worked example below, not a published percentage.
Site prep, delivery and cleanup4% of total$120 — inside Angi's $100–$500 site-prep band. Share derived from the worked example below, not a published percentage.
Faux polyurethane beams — 5 beams, ~75 LF at ~$18/LF · 45%Installation labor — carpenter, ~12 hours · 35%Stain, finish and touch-up — ~$4/LF · 10%Mounting rails, fasteners, corbels/hardware · 6%Site prep, delivery and cleanup · 4%
Estimator’s note: on a ceiling beam installation, faux polyurethane beams — 5 beams, ~75 lf at ~$18/lf is usually where quotes swing most (45% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A vaulted wood-beamed ceiling with skylights and lantern chandeliers — cutting beams around lights costs $200–$500 per fixture. Portrait source — 1200x800 centre crop keeps the skylights and beams, re-verified after processing
A vaulted wood-beamed ceiling with skylights and lantern chandeliers — cutting beams around lights costs $200–$500 per fixture. Portrait source — 1200x800 centre crop keeps the skylights and beams, re-verified after processing

What moves the price most

Beam material is the biggest cost driver: high-density foam and MDF faux beams run $12–$20 per linear foot, polyurethane $15–$25, PVC $18–$30, and custom solid-core beams $25–$35+ — while real wood runs $20–$90 per linear foot depending on species (Angi; Danloader). Beam size and count multiply the bill fast: contractors price by the linear foot, so a four-beam, 48-linear-foot ceiling can cost $1,200–$4,500 on material and labor alone — and dense layouts such as coffered or herringbone patterns add 20% or more (Danloader; Angi). Ceiling height and access add labor: vaulted or cathedral ceilings need scaffolding and angled cuts, pushing labor up; Angi puts large great-room or vaulted projects at $3,500–$5,000 versus $1,200–$2,000 for small flat-ceiling jobs, and Danloader notes labor of $40–$120 per hour (Angi; Danloader). Finish and stain work is a real line item: custom stains, paint, or finishes add $2–$5 per linear foot, and stain-grade wood with mitered ends and on-site finishing costs more than pre-finished beams (Angi; Karma Construction Group). Structural vs. decorative changes the job entirely: decorative faux beams are hollow and need no reinforcement; real wood beams weigh 10–40 lbs per linear foot and need proper blocking and support, while true structural beams need engineering and permits and run $8,000–$18,000+ (Danloader; Builds and Buys). Extras and location move the total: lighting cuts or fixture integration cost $200–$500 per fixture, decorative corbels or brackets $30–$150 each, design consultations and site prep $100–$500 each, and labor runs highest in urban and coastal markets (Angi). Where the sources disagree: Danloader's per-linear-foot figures are partly secondhand — its $15–$35 faux figure is attributed to HomeAdvisor and its $26–$37 real-wood figure to Homewyse; HomeAdvisor is the same company as Angi, so it is not counted as an independent source. Builds and Buys disagrees sharply — faux $3–$5 per linear foot installed, a single room $600–$2,000 — which looks like material-only or low-end pricing, so it was not used for headline figures. Karma Construction Group (a Raleigh contractor blog) is far higher — box beams $45–$110 per linear foot flat, $75–$160 vaulted — a premium local market, not national, so it was not used either. HomeGuide has no beam-specific guide — its coffered-ceiling guide is related, not beam-specific, and was not used. Worked example at the most-pay figure: 5 polyurethane faux beams (~75 linear ft) in a living room, professionally installed — faux polyurethane beams $1,350 + installation labor (carpenter, ~12 hours) $1,050 + stain, finish and touch-up $300 + mounting rails, fasteners, corbels and hardware $180 + site prep, delivery and cleanup $120 = $3,000. The shares are whole-percent roundings of this worked example. For the grid version see our coffered ceiling installation guide, for the recessed version see our tray ceiling installation guide, for the light that often goes with beams see our skylight installation guide and our recessed lighting installation guide, and for the panelled alternative see our drop ceiling installation guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Exposed rustic wood beams — real wood runs $26–$37 per linear ft installed, or $30–$90 by species. Portrait source — 1200x800 centre crop keeps the beams, re-verified after processing
Exposed rustic wood beams — real wood runs $26–$37 per linear ft installed, or $30–$90 by species. Portrait source — 1200x800 centre crop keeps the beams, re-verified after processing

Frequently asked questions

How much does ceiling beam installation cost per linear foot?

$15–$35 per linear foot installed for faux beams; $26–$37 for decorative real wood, or $30–$90 by species (pine cheapest, oak dearest). (Angi; Danloader/Homewyse.)

Are faux wood beams cheaper than real wood beams?

Yes — a typical faux project runs $1,500–$4,000 versus $2,500–$10,000 for real wood. Faux beams weigh only 2–5 lbs per linear foot, so they install faster and need no structural reinforcement. (Angi; Danloader; Builds and Buys.)

Do ceiling beams need structural support or a permit?

Decorative faux beams need neither in most cases. Real wood beams need ceiling blocking and support because of their weight, and structural beams need an engineer and a permit. Permits, when required, run $50–$200. (Angi; Danloader.)

Can I install ceiling beams myself?

Faux beams are the realistic DIY option — Angi puts DIY at $1,300–$3,300 versus $2,200–$5,000 professionally installed — but you need solid carpentry skills, and high ceilings or complex layouts are safer with a pro. (Angi.)

How much ceiling height do beams take away?

Beams lower the ceiling by 6–12 inches; aim for at least about 8.5 ft of clear height after installation, so very low ceilings are a poor fit. (Builds and Buys.)

How long does installation take?

A pro crew hangs about 100 linear feet of faux beams in roughly 10 hours; Angi's DIY guide budgets about 8 hours for a small faux-beam project. Real wood takes longer because of the lifting crew and finishing. (Artfasad; Angi.)

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Ceiling Beam Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Open-plan living room with a vaulted ceiling, exposed timber trusses, skylights and a stone fireplace

Vaulted Ceiling Installation Cost

$18,000 – $30,000

Vaulting a ceiling in an existing home — typically a 20×20 ft living room opened to the roofline as a cathedral vault, with new rafters and a ridge beam, insulation and drywall — typically costs $18,000–$30,000, with most homeowners paying around $20,000, about $50–$70 per sq ft.

Wood-panelled walk-in closet fitted with an open organizer system of shelves and hanging rods

Closet Organizer Installation Cost

$600 – $2,500

Installing a closet organizer system — laminate or MDF shelving, hanging sections and a drawer bank fitted into a standard reach-in closet that already exists, professionally installed — typically costs $600–$2,500, with most homeowners paying around $1,550, about $50–$150 per linear foot.

Modern living room with a black 3D-panel accent wall behind a low console, grey sofa in the foreground

Accent Wall Installation Cost

$400 – $2,000

Installing an accent wall — typically one wall of about 120 sq ft in painted shiplap or board and batten, professionally installed — typically costs $400–$2,000, with most homeowners paying around $900, about $2–$25 per sq ft depending on the finish.

Modern hallway with wooden doors and a sliding closet beside abstract wall art

Closet Door Installation Cost

$250 – $800

Installing new closet doors on one standard opening — a pair of bifold doors or a bypass set, professionally installed — typically costs $250–$800, with most standard jobs landing around $550.

A drywall finisher in a hard hat and respirator smoothing joint compound on a wall with a taping knife

Drywall Texture Installation Cost

$575 – $675

Texturing drywall in one room — a sprayed or hand-applied finish over new drywall, with masking and prep included — typically costs $575–$675, with most homeowners paying around $625, about $0.80–$2.00 per square foot of wall and ceiling surface.

A sunlit elevator lobby with closed ribbed elevator doors, a floor sign and an accessibility call panel

Dumbwaiter Installation Cost

$8,000 – $12,000

Installing a residential dumbwaiter — a small electric freight lift with a new shaft, landing doors and finish work — typically costs $8,000–$12,000, with most homeowners paying around $10,000.