Home › Cost Guides › Drywall Texture Installation
Cost Guide

How Much Does a Drywall Texture Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$575 – $675
Most homeowners pay around $625 · Texturing drywall in one room — a sprayed or hand-applied finish over new drywall, with masking and prep included — typically costs $575–$675, with most homeowners paying around $625, about $0.80–$2.00 per square foot of wall and ceiling surface.
typical
$575$675
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
A drywall finisher in a hard hat and respirator smoothing joint compound on a wall with a taping knife

Drywall Texture Installation cost at a glance

  • Typical range: $575 – $675
  • Most homeowners pay: around $625

Cross-checked against four published sources for this project. Sources used for this page: Angi, How Much Does It Cost to Texture Drywall? [2026 Data] (updated Oct 30, 2026 — national average $625 per room, most pay $575-$675; $0.80-$2.00 per sq ft; sprayed $0.80-$1.50, hand-applied $1.50-$2.00; orange peel $1.25-$1.95, popcorn $1.30-$1.90, smooth $1.00-$1.80, spray sand $1.05-$1.20, Venetian $3.00+; removal $1-$3 per sq ft; paint $1-$3 per sq ft; labor $40-$100/hr; rooms: bedroom 380 sq ft $418-$760, living room 450 sq ft $495-$900, basement 600 sq ft $660-$1,200, hallway 135 sq ft $150-$270); HomeGuide, How Much Does It Cost to Texture Drywall? (2026) (published Oct 18, 2022, updated Aug 29, 2025 — $0.80-$2.00 per sq ft; bedroom walls+ceiling $450-$1,000, living room $600-$1,400; walls $0.80-$1.80, ceilings $1.00-$2.00; retexture $1.80-$3.80 per sq ft; smoothing $1-$3 per sq ft; 500 sq ft calculator national avg $600, avg range $500-$680, min $400, max $900; texture paint material $0.10-$0.30 per sq ft; knockdown ceiling $1.00-$2.50; popcorn spray $1.00-$1.60; asbestos testing $250-$750 (test before 1986); $100 contractor minimum; sprayed under 1 day, hand-applied 1-3 days; sprayer rental $75-$95/day); HomeAdvisor, What Does It Cost to Texture Drywall? [2025 Data] (avg $625, most $575-$675, full range $450-$1,200, $0.80-$2.00 per sq ft; same texture-type and room tables as Angi; labor $40-$100/hr; removal $1-$3 per sq ft; smooth conversion $300-$1,200 / $1-$3 per sq ft — Angi Inc. sister site, same dataset as Angi, NOT an independent confirmation); Fixr (retexture $1-$3 per sq ft; light sprayed texture $0.50-$1.00 per sq ft; popcorn scrape $1-$4 per sq ft; abatement $3-$7 per sq ft). Disagreements flagged, not averaged away: bedroom Angi $418-$760 (walls only) vs HomeGuide $450-$1,000 (walls+ceiling); Angi's own room-table ceiling row (200 sq ft $650-$850, implying $3.25-$4.25 per sq ft) contradicts Angi's own $1.00-$2.00 ceiling rate and HomeGuide's ceiling tables — treated as a data error and NOT published; retexture HomeGuide $1.80-$3.80 per sq ft all-in vs Fixr $1-$3 per sq ft. Breakdown is a modeled worked example (no source publishes a line-item split of a $625 texture job); shares are derived from the source ranges, not published percentages. Checked November 2026.. Sources last checked: October 2026 — HomeAdvisor, HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Drywall Texture Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Single room or accent wall, sprayed finish$280 – $600One bedroom's walls or a single wall or hallway, sprayed orange peel or spray sand over new drywall, no old-texture removal. HomeGuide prices bedroom walls at $280–$800 and Angi prices a hallway at $150–$270; spray sand is the cheapest texture in Angi at $1.05–$1.20 per square foot.
Whole bedroom or living room, walls + ceiling, sprayed knockdown$450 – $1,000The typical project on this page: a bedroom or living room, walls and ceiling, sprayed knockdown or orange peel at $0.80–$1.50 per square foot. HomeGuide prices a bedroom walls-plus-ceiling at $450–$1,000 and a living room at $600–$1,400, and the $625 most-pay figure sits in this tier.
Retexture, hand-applied finish, or Venetian plaster$900 – $3,800Removing old texture and applying a new one, a hand-applied skip trowel or Santa Fe finish, or Venetian plaster. HomeGuide prices a full retexture at $1.80–$3.80 per square foot — $900–$1,900 for 500 square feet, up to $3,800 for 1,000 — hand-applied finishes run $1.50–$2.00 per square foot, and Venetian plaster starts at $3.00 per square foot with no published top. Paint after texture adds $1–$3 per square foot on top of any tier.

Where the money goes

Part of the jobShareNote
Labor — crew time: spraying, knockdown pass, sanding60% of total$375 — inside Angi's $40–$100 per hour labor band and consistent with the labor-dominant shape of drywall work in HomeGuide. Share derived from the worked example below, not a published percentage.
Materials — joint compound and texture mix, ~400 sq ft16% of total$100 — inside Angi's $0.20–$0.26 per square foot for joint compound, $80–$104 for 400 square feet. Share derived from the worked example below, not a published percentage.
Prep — masking, moving and covering furniture, floor protection12% of total$75 — prep is a named line in every guide; no source publishes a separate prep figure for a texture-only job. Share derived from the worked example below, not a published percentage.
Texture application equipment — hopper gun and compressor, consumables4% of total$25 — a texture sprayer rents for $75–$95 per day in HomeGuide; a pro's per-job equipment share is a fraction of that. Share derived from the worked example below, not a published percentage.
Cleanup — dust control, debris removal, wipe-down8% of total$50 — no source publishes a separate cleanup figure for a texture-only job. Share derived from the worked example below, not a published percentage.
Labor — crew time: spraying, knockdown pass, sanding · 60%Materials — joint compound and texture mix, ~400 sq ft · 16%Prep — masking, moving and covering furniture, floor protection · 12%Texture application equipment — hopper gun and compressor, consumables · 4%Cleanup — dust control, debris removal, wipe-down · 8%
Estimator’s note: on a drywall texture installation, labor — crew time: spraying, knockdown pass, sanding is usually where quotes swing most (60% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Hand-finishing a wall with a long trowel. Hand-applied textures run $1.50–$2.00 per square foot, against $0.80–$1.50 for sprayed finishes (Angi)
Hand-finishing a wall with a long trowel. Hand-applied textures run $1.50–$2.00 per square foot, against $0.80–$1.50 for sprayed finishes (Angi)

What moves the price most

Surface area, not floor area, sets the frame. All three guides price on wall and ceiling square feet: a 12-by-12-foot room carries roughly 380–500 square feet of surface, and HomeGuide's rule of thumb is that surface area runs about 3 times the floor area when walls and ceilings are both included. Texture type is the biggest lever after size: spray sand runs $1.05–$1.20 per square foot, orange peel $1.25–$1.95, popcorn $1.30–$1.90, smooth $1.00–$1.80, and Venetian plaster $3.00 and up with no published top (Angi). Sprayed versus hand-applied: sprayed finishes run $0.80–$1.50 per square foot against $1.50–$2.00 for hand-applied finishes in all three guides — hand work such as skip trowel or Santa Fe costs more for the extra time and skill. Walls versus ceilings: HomeGuide prices walls at $0.80–$1.80 and ceilings at $1.00–$2.00 per square foot; a bedroom ceiling runs $130–$270 and a living-room ceiling $220–$440. Existing texture removal: removal alone runs $1–$3 per square foot (Angi, HomeAdvisor), and a full retexture — removal plus new texture — runs $1.80–$3.80 per square foot (HomeGuide). Homes built before 1986 should be tested for asbestos first: $250–$750 (HomeGuide). Where the sources disagree: Angi prices a bedroom at $418–$760 and HomeGuide at $450–$1,000 — different scopes, not a true conflict, since Angi's 380-square-foot figure is walls only and HomeGuide's is walls plus ceiling. Angi's own room table also lists a 200-square-foot ceiling at $650–$850, implying $3.25–$4.25 per square foot — that contradicts Angi's own $1.00–$2.00 ceiling rate and HomeGuide's ceiling tables, so this page does not publish it. One dataset, not two: Angi and HomeAdvisor are both Angi Inc. properties with near-identical tables, so the genuine independent agreement is Angi Inc. against HomeGuide, with Fixr corroborating the removal and retexture bands. Paint is a separate line: freshly textured walls need a primer coat before paint (HomeGuide), and painting adds $1–$3 per square foot in all three guides — it is not included in the $625 average. Worked example at the most-pay figure: one 400-square-foot room, sprayed knockdown on new drywall, no removal, no paint — labor $375 + materials $100 + prep $75 + equipment $25 + cleanup $50 = $625. The shares are whole-percent roundings of this worked example; the dollar split itself is modeled from the guides' published rates, not a sourced line-item split. For the wall underneath see our drywall installation guide, for fixing damaged drywall first see our drywall repair guide, for removing an old popcorn ceiling see our popcorn ceiling removal guide, for painting after texture see our interior house painting guide, and for ceiling repairs see our ceiling repair guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Close-up of a textured plaster surface. A sprayed finish leaves a raised, even pattern like this across the whole wall — the photo shows a plaster texture, not one specific drywall pattern
Close-up of a textured plaster surface. A sprayed finish leaves a raised, even pattern like this across the whole wall — the photo shows a plaster texture, not one specific drywall pattern

Frequently asked questions

How much does it cost to texture drywall?

About $0.80–$2.00 per square foot of wall and ceiling surface, with most single-room jobs landing at $575–$675 and averaging $625 (Angi, updated October 2026; HomeAdvisor agrees, and HomeGuide's 500-square-foot average is $600). The full project range runs $450–$1,200.

Which drywall texture is the cheapest?

Spray sand at $1.05–$1.20 per square foot, then orange peel at $1.25–$1.95 (Angi). Sprayed finishes generally run $0.80–$1.50 per square foot against $1.50–$2.00 for hand-applied finishes in all three guides.

How much extra does removing old texture cost?

Removal runs $1–$3 per square foot (Angi, HomeAdvisor), and a full retexture — removal plus new texture — runs $1.80–$3.80 per square foot (HomeGuide). Converting textured walls back to smooth costs $1–$3 per square foot, or $300–$1,200 per job. Homes built before 1986 should be tested for asbestos first: $250–$750 (HomeGuide).

Does texturing a ceiling cost more than walls?

Yes, slightly: HomeGuide prices walls at $0.80–$1.80 per square foot and ceilings at $1.00–$2.00; a bedroom ceiling runs $130–$270 and a living-room ceiling $220–$440.

Do I need to paint after texturing?

Freshly textured walls need a primer coat before paint (HomeGuide), and painting adds $1–$3 per square foot to the project in all three guides — it is not included in the $625 average.

How long does texturing take, and can I DIY it?

A sprayed texture takes less than a day for an average home; hand-applied textures take 1–3 days (HomeGuide). DIY is possible but messy and needs skill and timing; renting a texture sprayer costs $75–$95 per day (HomeGuide). Texture is optional — drywall can be painted smooth as long as the joints are mudded and the surface is primed first (HomeGuide).

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Drywall Texture Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

A sunlit elevator lobby with closed ribbed elevator doors, a floor sign and an accessibility call panel

Dumbwaiter Installation Cost

$8,000 – $12,000

Installing a residential dumbwaiter — a small electric freight lift with a new shaft, landing doors and finish work — typically costs $8,000–$12,000, with most homeowners paying around $10,000.

Hands filling a bottle from a wall-mounted water-filter unit at a kitchen sink

Under-Sink Reverse Osmosis Installation Cost

$300 – $950

Installing an under-sink reverse osmosis system — a tank or tankless unit fitted below the kitchen sink, treating drinking and cooking water at one tap through its own dedicated faucet — typically costs $300–$950 installed, with most standard tank jobs landing around $625, the midpoint of the $300–$950 band (no surveyed under-sink average exists). This page covers under-sink systems only — whole-house reverse osmosis is a different job ($4,800–$8,000 installed) covered on our whole-house water filtration page.

Modern stainless steel kitchen faucet over a sink with a marble backsplash

Faucet Installation Cost

$150 – $400

Like-for-like replacement on existing hookups — Angi's 2026 national averages are $262 for a kitchen faucet and $270 for a bathroom faucet, with most homeowners paying $150–$400. A faucet in a new location is a different, much pricier job and is priced separately below.

Water heater tank with softener and installation tools in a bathroom

Heat Pump Water Heater Installation Cost

$3,200 – $4,600

A hybrid heat pump water heater (integrated unit), professionally installed — Angi's 2026 national average is $4,200. This page publishes $3,200–$4,600 as the typical range: the honest overlap of the published sources (Angi's own band runs $3,200–$4,700; HomeGuide $2,000–$4,600). A standard 50-gallon integrated unit replacing an electric tank is priced below; split-system, solar-supported and geothermal types cost more and are priced separately.

Technician testing the wiring on a cylindrical steel unit with a multimeter

Sewage Ejector Pump Installation Cost

$2,000 – $5,500

A new sewage ejector pump system, professionally installed — a full new system typically costs $2,000–$5,500 (HomeGuide), with ABS Pipes putting the national average for a full new system at about $2,800. This page prices a standard new system for a basement bathroom: a 1/2 HP pump in a sealed basin, with discharge piping, venting, a dedicated circuit and a permit. Replacing just the pump in an existing basin costs far less — $850–$3,500 installed (Angi's $2,300 national average is a replacement average, not a new-system average).

Cream roof vent stack on a yellow building against a blue sky

Radon Mitigation Installation Cost

$800 – $2,000

A standard single-point active sub-slab depressurization system on a typical basement or slab home — an inline exhaust fan, PVC piping vented above the roofline, a monitoring device, a fan-failure alarm, slab sealing and prep, an electrical connection, permit and inspection, and a post-installation verification test. The most-pay figure $1,250 is the midpoint of the $1,200–$1,300 band where the published typical ranges agree (Angi $800–$1,300; HomeGuide $1,200–$2,000) — it is NOT any single source's published average, and the page says so. The honest overlap of the two typical ranges is only $1,200–$1,300; the $800–$2,000 typical range is their union.