Home › Cost Guides › Brick Driveway Installation
Cost Guide

How Much Does a Brick Driveway Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$5,500 – $14,500
Most homeowners pay around $10,000 · $10,000 is the pin: the derived midpoint of HomeGuide's published $5,500–$14,500 total for a standard 24'x24' (576 sq ft) 2-car clay-brick driveway, materials + installation — NOT a published national average; no source publishes a brick-specific average (Angi's $12,000 average covers paver driveways of ALL materials; its $3,400 interlocking-paver average covers all paver projects including small patios). Clay brick runs $10–$25 per sq ft installed (HomeGuide); the four sources' brick bands overlap at $12–$20. This page is clay brick ONLY — the companion to the all-materials paver-driveway page; concrete pavers run $2–$5 less per sq ft.
typical
$5,500$14,500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
A suburban house with a herringbone red-brick driveway in front

Brick Driveway Installation cost at a glance

  • Typical range: $5,500 – $14,500
  • Most homeowners pay: around $10,000
  • Per square foot: $10–$25 per sq ft

Cross-checked against four published sources for this project. Sources used for this page: Angi, 'How Much Does a Paver Driveway Cost? [2026 Data]', updated Oct 15, 2026 — paver driveway (all materials) national average $12,000, most pay $6,000–$18,000; brick material $12–$22/sq ft (concrete $10–$18; natural stone $20–$35); by type standard $10–$18/sq ft, decorative $18–$30, custom patterns $20–$35; by size 300 sq ft $3,000–$9,000, 600 sq ft $6,000–$18,000, 1,000 sq ft $10,000–$30,000; labour $50–$80/hr or $5–$15/sq ft; permits $50–$300; sealing $1–$3/sq ft every 3–5 years; repairs $200–$500 minor, $1,000–$2,500 extensive. Angi, 'How Much Does Interlocking Paver Installation Cost? [2026 Data]', updated Oct 28, 2026 — clay brick $10–$20/sq ft (concrete brick $8–$15); labour $50–$80/hr or $4–$11/sq ft; national average $3,400 and most pay $1,500–$7,000 cover ALL interlocking paver projects including small patios/walkways, NOT driveways. HomeGuide, 'How Much Does It Cost to Install Driveway Pavers? (2026)' — brick driveway $10–$25/sq ft, or $5,500–$14,500 for a 24'x24' (576 sq ft) 2-car driveway, materials + installation; all pavers $10–$30/sq ft; materials $4–$20/sq ft; labour $6–$10/sq ft (operations table $6.25–$10.90); base materials $2–$3/sq ft; permits $50–$250; grading $3–$8/sq ft; old-driveway removal $2–$6/sq ft; sealing $1.50–$3.25/sq ft pro; brick 8,000–12,000 PSI, rectangular blocks only, 2-3/8 in thick, 4–6 in sub-base; install 3–5 days; crew ~100 sq ft/day (~50 with intricate cutting); DIY $5–$25/sq ft. EngineerFix, 'How Much Does a Brick Driveway Cost?' (no date shown) — professionally installed brick paver driveway $10–$30/sq ft; paver materials $4–$15/sq ft (clay at the high end); base materials +$1–$3/sq ft; labour $5–$15/sq ft; material and labour contribute nearly equally (the only published labour/material share — qualitative ~50/50); old-driveway removal +$2–$6/sq ft; sealing $1.50–$3.25/sq ft every 3–5 years. This Old House, 'Driveway Repaving Cost', updated Jun 5, 2026 (cost data from Homewyse) — brick pavers $12–$62/sq ft materials + labour; 400 sq ft $4,879–$24,737; the $62 top end is a high-end outlier, 2–3x every other source's top end, never blended into the typical band; bricks last up to 50 years; demolition $1–$4/sq ft; permits $50–$500; install 3–7 days incl. demolition. Bob Vila, 'How I Solved My Home's Driveway Dilemma', Oct 31, 2025 — brick pavers $6–$12/sq ft materials, up to $30/sq ft installed; last 25–30 years or longer; reseal every 3–5 years. $10,000 is the derived midpoint of HomeGuide's $5,500–$14,500 published 2-car total, not a published average. Breakdown shares are derived from the worked example below. HomeGuide's 69% ROI claim is single-source with no methodology and is not published. Checked November 2026.. Sources last checked: October 2026 — This Old House, HomeGuide, Angi, Homewyse. How we calculate these costs

Cost by scope

Brick Driveway Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — standard clay brick, running bond$10 – $15 per sq ftStandard clay brick pavers in a running-bond pattern on a flat site, basic 4–6 in compacted gravel base, minimal grading, plain edge restraint — $6,000–$9,000 for a 600 sq ft 2-car driveway. The low half of Angi's clay-brick $10–$20 band plus HomeGuide's $10 floor; tier totals are derived arithmetic from the published per-sq-ft bands.
Standard — mid-grade brick, herringbone$15 – $22 per sq ftThe most-pay tier — the worked example below: mid-grade clay brick in a herringbone or basketweave pattern, standard base build, concrete bond-beam edging, polymeric joint sand, sealing included — $9,000–$13,200 for 600 sq ft. The band most brick driveways land in (Angi brick $12–$22 upper portion; HomeGuide mid-band).
Premium — premium brick, custom patterns$22 – $30 per sq ftPremium, tumbled or antique brick, custom patterns, soldier-course borders and inlays, decorative edging, curves or circular sections — $13,200–$18,000 for 600 sq ft (Angi decorative $18–$30 and custom $20–$35; EngineerFix and Bob Vila $30 installed top end). Heated systems ($19–$50/sq ft) and cobblestone ($20–$50/sq ft) are separate jobs, not this tier.

Where the money goes

Part of the jobShareNote
Brick pavers (materials)42% of total$4,200 for the brick pavers — $7 per sq ft over 600 sq ft, inside EngineerFix's $4–$15 materials band and Bob Vila's $6–$12 brick-materials band (clay at the high end). Share derived from the worked example below.
Base materials (geotextile, road base, bedding sand, edging, joint sand)12% of total$1,200 for base materials — $2 per sq ft over 600 sq ft, inside HomeGuide's $2–$3 table band (geotextile $0.30–$0.50, Class II road base $1.20–$1.60, bedding sand $0.30–$0.40, edging/bond beam $0.10–$0.20, polymeric sand $0.10–$0.30). Share derived from the worked example below.
Labour (excavation, grading, base compaction, laying)44% of total$4,350 for labour — $7.25 per sq ft over 600 sq ft, inside HomeGuide's $6–$10 band (its operations table totals $6.25–$10.90) and the wider $5–$15 bands from Angi and EngineerFix. Share derived from the worked example below.
Permits2% of total$250 for permits — inside Angi's $50–$300 paver-specific band and HomeGuide's $50–$250 band; complex jobs can run higher (This Old House $50–$500). Share derived from the worked example below.
Brick pavers (materials) · 42%Base materials (geotextile, road base, bedding sand, edging, joint sand) · 12%Labour (excavation, grading, base compaction, laying) · 44%Permits · 2%
Estimator’s note: on a brick driveway installation, labour (excavation, grading, base compaction, laying) is usually where quotes swing most (44% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A worker laying pavers on a prepared sand base — laying is the labour half of a brick driveway budget, and intricate patterns like herringbone take roughly twice as long as running bond (a two-person crew lays about 100 sq ft a day, ~50 with intricate cutting, HomeGuide). The pavers shown are dark pavers, not clay brick.
A worker laying pavers on a prepared sand base — laying is the labour half of a brick driveway budget, and intricate patterns like herringbone take roughly twice as long as running bond (a two-person crew lays about 100 sq ft a day, ~50 with intricate cutting, HomeGuide). The pavers shown are dark pavers, not clay brick.

What moves the price most

Worked example — $10,000 most-pay install (600 sq ft 2-car clay-brick driveway, herringbone pattern, standard base, permit): brick pavers $4,200 (42%) + base materials $1,200 (12%) + labour $4,350 (44%) + permits $250 (2%) = $10,000. Every line sits inside a published band. The shares are whole-percent roundings of this example — the only published share is EngineerFix's qualitative statement that material and labour contribute nearly equally (about 50/50), which this example is consistent with (materials + base 54%, labour 44%). The $10,000 pin is the derived midpoint of HomeGuide's published $5,500–$14,500 range, not a published average. Per square foot: $10–$25 installed (HomeGuide); the honest overlap of the four sources' brick bands is $12–$20. This Old House / Homewyse runs to $62 per sq ft at the high end — a high-end outlier, 2–3x every other source's top end, never blended into the typical band. Clay brick vs concrete pavers: clay brick costs about $2–$5 more per sq ft (Angi brick $12–$22 vs concrete $10–$18; Angi interlocking clay $10–$20 vs concrete $8–$15; HomeGuide brick $10–$25 vs concrete $10–$20). Brick holds its colour for decades (fired-in pigment), comes only in rectangular blocks in earthy hues, and is harder to cut than concrete pavers. What moves the price: the laying pattern first — herringbone takes significantly longer than running bond (a two-person crew lays about 100 sq ft a day, ~50 with intricate cutting, HomeGuide) — then the base build (excavation depth, geotextile, Class II road base, bedding sand, compaction), site prep (removal of an old surface $2–$6/sq ft, HomeGuide and EngineerFix agree; grading $3–$8/sq ft where needed, HomeGuide) and edge restraints ($1–$2 per linear ft, HomeGuide; concrete curbing $5–$18). Lifespan and upkeep: 25–50 years for brick (Bob Vila 25–30+; This Old House up to 50); use SX-rated pavers in severe-weather climates (This Old House). Seal every 3–5 years at $1–$3.25 per sq ft professionally (Angi; HomeGuide; EngineerFix); top up polymeric joint sand ($0.25–$0.50/sq ft, EngineerFix). Repairs are cheap and local — $200–$500 for minor work like swapping a few pavers, $1,000–$2,500 for extensive resetting (Angi) — no slab to replace. Where sources disagree: installed $/sq ft — Angi $12–$22, Angi interlocking clay $10–$20, HomeGuide $10–$25, EngineerFix $10–$30, Bob Vila up to $30 installed (overlap $12–$20; This Old House/Homewyse $12–$62 is the outlier); labour — HomeGuide $6–$10 vs Angi $5–$15 vs Angi interlocking $4–$11 vs EngineerFix $5–$15 (overlap $6–$10); permits — Angi $50–$300 vs HomeGuide $50–$250 vs This Old House $50–$500 (Angi interlocking's $150–$2,000 is a general construction-permit range, not paver-specific); lifespan — Bob Vila 25–30+ vs This Old House up to 50 vs HomeGuide 25–75 for pavers generally (the 75-year top is not a brick figure). HomeGuide's 69% ROI claim for paver driveways is single-source with no methodology and is not published here. DIY runs $5–$25/sq ft (HomeGuide) but needs experience, heavy machinery and a wet saw — a note only, never the Budget tier. Methodology: the typical range $5,500–$14,500 is HomeGuide's published total for a 24'x24' 2-car brick driveway, corroborated by Angi's all-paver 600 sq ft range $6,000–$18,000 and Angi's brick band $12–$22/sq ft; tier totals are derived arithmetic from the published per-sq-ft bands. Related costs: paver driveway installation, concrete driveway, asphalt driveway, brick patio installation, driveway replacement, driveway sealing and heated driveway installation.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Red clay-brick pavers in a herringbone pattern — herringbone is the strongest interlocking pattern for driveways but takes significantly longer to lay than running bond, which is why it sits in the Standard tier at $15–$22 per sq ft.
Red clay-brick pavers in a herringbone pattern — herringbone is the strongest interlocking pattern for driveways but takes significantly longer to lay than running bond, which is why it sits in the Standard tier at $15–$22 per sq ft.

Frequently asked questions

How much does a brick driveway cost?

Typically $5,500–$14,500 for a standard 24'x24' 2-car brick driveway, materials and installation (HomeGuide). Most homeowners pay around $10,000 — a derived midpoint of that published range, not a published average. Angi's all-paver average is $12,000, but that covers concrete, stone and porcelain pavers too.

How much does a brick driveway cost per square foot?

$10–$25 per square foot installed (HomeGuide). The four sources' brick bands overlap at $12–$20 per sq ft; This Old House/Homewyse runs to $62 at the high end for premium jobs. Materials alone run $4–$15 per sq ft (EngineerFix) or $6–$12 (Bob Vila).

How long does a brick driveway last?

25–50 years. Bob Vila: 25–30 years or longer. This Old House: bricks can last up to 50 years. HomeGuide's 25–75 year figure is for pavers in general, not brick specifically. Individual bricks can be lifted and replaced; use SX-rated pavers in severe-weather climates (This Old House).

Are brick pavers more expensive than concrete pavers?

Yes — by about $2–$5 per square foot. Angi: clay brick $10–$20 vs concrete brick $8–$15 (interlocking guide); brick $12–$22 vs concrete $10–$18 (paver-driveway guide). HomeGuide: brick $10–$25 vs concrete $10–$20. Brick holds its colour for decades and comes only in rectangular blocks; concrete pavers offer more shapes and colours but can spall/flake from moisture (HomeGuide).

How long does it take to install a brick driveway?

3–5 days for a professional install (HomeGuide), usable immediately — no curing wait like poured concrete. This Old House: 3–7 days including demolishing an old driveway. A two-person crew lays about 100 sq ft a day, ~50 with intricate cutting (HomeGuide). DIY takes 2–3 weekends with help (Angi) or 7–14 days (EngineerFix).

What maintenance does a brick driveway need?

Seal every 3–5 years at $1–$3.25 per square foot professionally (Angi; HomeGuide; EngineerFix). Top up polymeric joint sand ($0.25–$0.50/sq ft, EngineerFix) so pavers stay interlocked. Sweep/rinse routinely; pull weeds from joints. Repairs are cheap and local: $200–$500 for minor work like swapping a few pavers, $1,000–$2,500 for extensive resetting (Angi) — no slab to replace.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Brick Driveway Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

A garden waterfall cascading over rocks into a pond beside a brick house

Backyard Waterfall Installation Cost

$5,000 – $10,000

$7,500 is the pin: the derived midpoint of the $5,000–$10,000 overlap band for a typical mid-size pro-installed backyard waterfall — NOT a published national average; no source publishes a waterfall-only average (Angi's $2,730 and Fixr's $8,000 are fountain-category averages and are not used here). The band is the honest overlap of HomeGuide's standalone waterfall $4,500–$13,600 installed, Midwest's Chicago pondless $5,000–$18,000, Angi's custom water feature $5,000–$10,000+ and Grass Roots' basic package from $6,000. A pondless (disappearing) waterfall recirculates water through a rock cascade into a buried reservoir — no open standing water.

Solar panels across the red-tiled roofs of modern homes in bright sunshine

Solar Roof Installation Cost

$27,600 – $50,000

$38,800 is a derived most-pay figure — the midpoint of the $27,600–$50,000 overlap of Angi's ($21,000–$50,000) and Fixr's ($27,600–$60,000) most-pay bands; their published averages disagree (Angi $35,000 vs Fixr $46,000), so no single published average is printed. At $21–$25 per sq ft of coverage ($23 average, Angi and Fixr agree), full 2,000-sq-ft coverage is $42,000–$50,000 in both sources. The federal tax credit is $0 for 2026 installs — the 30% residential credit ended December 31, 2025 — so every figure here is gross installed cost, never net of a credit.

An alpine house with yellow balconies and black railings

Balcony Installation Cost

$8,000 – $25,000

$14,000 is Angi's published national average (updated Oct 1, 2026) — NOT a derived midpoint. A medium 40–80 sq ft balcony is $8,000–$17,000, and the 100–150 sq ft spec on this page lands in Angi's large-size band at $15,000–$30,000+. At $30–$90 per sq ft (Angi, all-in), the per-sq-ft and total bands do not reconcile at small sizes — never derive a total from the per-sq-ft rate.

A cobblestone drive leading to a stone house under autumn trees

Cobblestone Driveway Installation Cost

$8,600 – $24,800

$16,700 is Angi's published national average (updated Oct 19, 2026) — NOT a derived midpoint — for a standard 480 sq ft (20'x24') 2-car driveway of real cobblestone. At $18–$50 per sq ft (Angi, all-in), the honest overlap across all three sources is $27–$37 per sq ft. Totals on this page come from Angi's published size table, not from multiplying the per-sq-ft rate.

Brick house with a new architectural shingle roof, dormers and gutters

Roof Replacement Cost

$6,000 – $16,000

Typical asphalt-shingle replacement on an average-size home — about $4 – $11 per sq ft installed

White buildings with flat roofs under a clear sky

Flat Roof Installation Cost

$4,000 – $11,000

Flat roof installation typically costs $4,000 – $11,000 for a 1,000-square-foot residential flat roof replacement with a membrane system, at about $4–$11 per square foot, with about $7,500 the figure most jobs land near — HomeGuide prices flat roof replacement at $3–$11 per square foot with a $4,000–$16,800 average, Angi averages $7,433 across 32,999 verified projects with most at $3,331–$11,558, and RoofCalc prices a simple roof at $5–$10 per square foot. A budget membrane or overlay where allowed lands below the band, and a premium PVC system with tapered insulation runs above it, while the membrane, labor, tear-off, disposal and permits below are all inside the total.