Home › Cost Guides › Asphalt Driveway
Cost Guide

How Much Does an Asphalt Driveway Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$3,200 – $7,500
Most homeowners pay around $5,350 · New asphalt driveway — Angi's 2026 national average across 11,170 verified projects is $5,350
typical
$3,200$7,500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Asphalt paver laying fresh blacktop on a road, autumn trees alongside

Asphalt Driveway cost at a glance

  • Typical range: $3,200 – $7,500
  • Most homeowners pay: around $5,350
  • Prices vary most by: Labor & equipment (≈ 40–55% of the budget)

Cross-checked against four published sources for this project. Sources used for this page: the Angi asphalt driveway cost guide (October 2026, 11,170 verified projects), Fixr's asphalt driveway cost data, Engineer Fix's asphalt driveway cost guide and AsphaPro's April 2026 asphalt driveway installation breakdown. Sources last checked: October 2026 — Fixr, Angi, Engineer Fix, AsphaPro. How we calculate these costs

Cost by scope

Asphalt Driveway cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Overlay on sound pavement$3 – $7 per sq ftA new asphalt layer over a structurally sound existing drive — the budget route when the base is good
New asphalt driveway$7 – $13 per sq ftFull build: excavation, compacted gravel base and 2+ inches of hot mix — the band most driveways land in
Full replacement (tear-out + new)$8 – $15 per sq ftOld driveway removed first — removal alone adds $1–$3 a square foot before the new build begins
Premium / decorative$10 – $25 per sq ftStamped or colored asphalt $10–$17 installed in Angi; heated driveways $12–$25 — specialty systems, specialty prices

Where the money goes

Part of the jobShareNote
Asphalt materials≈ 25–40% of totalHot mix $1–$5 a square foot uninstalled in Fixr; Angi prices materials at $2–$6 of its $7–$13 installed band — the grade moves this line most
Labor & equipment≈ 40–55% of totalThe single biggest share — Angi prices labor at $5–$7 a square foot on new work; Engineer Fix puts labor at 40–50% of a replacement project
Base prep, gravel & grading≈ 10–20% of totalExcavation and grading $300–$900 and a 4–6 inch compacted gravel base $200–$500 on AsphaPro's 600 sq ft 2026 breakdown; poor soil needs a deeper stone base
Edging, permits & clean-up≈ 5–10% of totalEdge restraints, permits where the municipality requires them and site clean-up — the small lines that still belong in the quote
Asphalt materials · ≈ 25–40%Labor & equipment · ≈ 40–55%Base prep, gravel & grading · ≈ 10–20%Edging, permits & clean-up · ≈ 5–10%
Estimator’s note: on an asphalt driveway, labor & equipment is usually where quotes swing most (≈ 40–55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Compaction right behind the paver — the base and the rolling are what a driveway's 20–30 year life actually rests on; AsphaPro prices a 4–6 inch compacted gravel base at $200–$500 on a standard 600 sq ft job.
Compaction right behind the paver — the base and the rolling are what a driveway's 20–30 year life actually rests on; AsphaPro prices a 4–6 inch compacted gravel base at $200–$500 on a standard 600 sq ft job.

What moves the price most

Scope is the budget. An overlay ($3–$7 a square foot), a new driveway on prepared ground ($7–$13), a full tear-out and replacement ($8–$15) and a heated or decorative system ($10–$25) are four different projects — comparing an overlay quote with a replacement quote is the classic apples-to-oranges mistake. Base conditions are the second lever: good soil with light grading keeps a job in the new-driveway band, while poor soil, tree roots and drainage work push it up. Thickness is the third — Angi's minimum is 2 inches of asphalt, with 4–6 inches recommended for durability, and heavy vehicles want the deeper end. Asphalt grade is the material choice: recycled/reclaimed saves up to $1,350 in materials on an average driveway in Angi, while stamped, colored and heated systems sit in the premium tier.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical asphalt driveway budget breaks down

Take the typical job — a standard 600 sq ft two-car asphalt driveway on ordinary soil: excavation and grading, a 4–6 inch compacted gravel base, 2–3 inches of hot mix laid and rolled, edges finished. Here is a realistic $5,350 version of that invoice, at Angi's 2026 national average: The budget below totals $5,350 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Hot-mix asphalt materials (~12 tons)$1,600
Labor & equipment (paver crew, roller)$2,400
Base prep, gravel & grading$900
Edging, permits & clean-up$450
Total$5,350

What most people get wrong

  • Pricing the square footage without the base. AsphaPro's 600 sq ft breakdown prices excavation and grading at $300–$900 and the compacted gravel base at $200–$500 — a quote with no base depth stated is a different product from one with 6 inches of compacted stone.
  • Comparing an overlay quote with a replacement quote. Angi prices overlays at $3–$7 a square foot against $8–$15 for full replacement — half the price because it is half the job, and only valid on a structurally sound driveway.
  • Skipping the sealing schedule. The first sealcoat goes down 6–12 months after paving in AsphaPro, then every few years — Fixr averages a sealing job at about $420, and unsealed asphalt ages in dog years.
  • Ignoring drainage until the first puddle. Engineer Fix specs a ~2% drainage gradient, and AsphaPro prices drainage features at $500–$2,000 — standing water is what turns a 25-year driveway into a 10-year one.

Costs in your city

Asphalt pricing is oil pricing plus local labor wrapped around a tonnage figure: Engineer Fix notes the per-ton price of asphalt varies by region, and the same 600 sq ft driveway quotes differently where crew rates and plant prices run high. Northern markets pay for a deeper base and a longer paving season's scheduling premium; southern markets pave nearly year-round but pay the heat penalty in shorter crew days. Tree removal is the local wildcard Angi prices at $1,500–$5,100 where stumps and roots sit in the driveway's path. Permits and stormwater rules are the municipality's own — ask each bidder for the base depth, the asphalt thickness and whether drainage and permits are inside the number.

How we got these numbers

Cross-checked against the Angi asphalt driveway cost guide — read in full this run, October 2026 data (national average $5,350 across 11,170 verified projects; most homeowners paying $3,154–$7,556; new $7–$13 a square foot; replacement $8–$15; overlay $3–$7; materials $2–$6 plus labor $5–$7; recycled asphalt saving up to $1,350 in materials; stamped/colored $10–$17; heated $12–$25), Fixr's asphalt driveway cost data — read in full this run (national average $5,804 on a 24-by-24 hot-mix example; average range $3,000–$10,000; $7–$15 a square foot fully installed; materials $1–$5 plus installation $4–$13; hot-mix/recycled/porous/colored material grades; 15–30 year lifespan; sealing averaging ~$420; repairs ~$300) and Engineer Fix's asphalt driveway cost guide — read in full this run (national average about $5,000–$5,300; $2,800–$10,000+; $7–$15 a square foot for the complete job; 4-inch finished layer common, 5–6 inches for heavy vehicles; labor 40–50% of a replacement project), with AsphaPro's April 2026 contractor breakdown as corroboration (600 sq ft new $1,800–$3,900 and replacement $2,800–$6,000; $3–$7 new and $4–$9 replacement per square foot; excavation $300–$900; gravel base $200–$500; asphalt $600–$1,000; labor $700–$1,500; 20–30 year life) — its per-square-foot figures run well below the three national publishers and are flagged as a single-contractor outlier, never blended. Genuine disagreements are published as-is: sealing frequency (Angi every 3–5 years vs AsphaPro every 2–3), replacement band (Angi $8–$15 vs Fixr $4–$8 vs AsphaPro $4–$9 — scope wording differs) and lifespan (15–30 vs 20–30 years). Breakdown percentage shares are derived from the guides' dollar figures and are labelled as derived on the page. Checked October 2026. Full method: How We Estimate Costs.

The surface up close — hot mix, recycled, porous and colored are the material grades in Fixr's tables, and the grade moves the per-square-foot price more than the labor does.
The surface up close — hot mix, recycled, porous and colored are the material grades in Fixr's tables, and the grade moves the per-square-foot price more than the labor does.

Frequently asked questions

How much does an asphalt driveway cost?

$3,200–$7,500 is the typical installed band for a new driveway, and Angi's 2026 data averages $5,350 across 11,170 verified projects. Fixr's national figure is $5,804 on its 24-by-24 hot-mix example, and Engineer Fix centers around $5,000–$5,300.

What does an asphalt driveway cost per square foot?

$7–$13 a square foot installed for a new driveway in Angi; Fixr and Engineer Fix both publish $7–$15. An overlay on sound pavement runs $3–$7, and a full tear-out replacement $8–$15.

Is it cheaper to overlay or replace?

Overlaying is roughly half the price — $3–$7 a square foot against $8–$15 for a full replacement in Angi. It only works on a structurally sound driveway with a good base; overlaying a failed base is the expensive way to buy the replacement twice.

How long does an asphalt driveway last?

15–30 years in Fixr (about 20 on average), 20–30 in AsphaPro with good maintenance. The first sealcoat goes down 6–12 months after paving, then every 2–3 years in AsphaPro or 3–5 in Angi — the guides genuinely differ on frequency, and the page shows both. Passenger cars can drive on it after 2–3 days; give heavy vehicles two weeks.

How thick should an asphalt driveway be?

2 inches is Angi's published minimum, with 4–6 inches recommended for durability; Engineer Fix calls 4 inches common and 5–6 inches right for heavy vehicles. The residential system — subgrade, compacted gravel base, binder and surface courses — totals 6–9 inches in AsphaPro's 2026 breakdown.

Can I DIY an asphalt driveway?

Angi prices DIY at about $7 a square foot in materials, but AsphaPro is blunt: hot-mix work is not a homeowner project — the paver alone costs six figures, the mix must be laid at 275–325°F inside a short delivery window, and compaction takes real equipment. The realistic DIY savings are in the prep: clearing, marking utilities, the gravel base and your own sealcoat later.

Before you sign: confirm the base depth and asphalt thickness in writing before comparing quotes, keep removal and drainage as separate lines, pin down the sealing schedule at handover, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Asphalt Driveway cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Wide gravel driveway in front of a house at sunset

Gravel Driveway Installation Cost

$1,500 – $4,000

Gravel driveway installation typically costs $1,500 – $4,000 for a standard 2-car driveway with a full base and surface layer, professionally installed, with about $1,800 the figure most jobs land near — Angi averages $1,800 with most at $500–$3,500, HomeGuide prices a gravel driveway at $4–$10 per square foot installed with a 2-car driveway at $4,000–$10,000, and EngineerFix puts the average installed cost at $1–$4 per square foot. The stone, base layers, grading, spreading, compaction and edging below are all inside the total, while periodic top-ups — EngineerFix prices replenishment at $0.25–$1 per square foot — are ongoing upkeep, published separately.

Construction trench with gravel bed and drainage pipes on a suburban site

French Drain Installation Cost

$2,000 – $8,000

Exterior yard or perimeter French drain — LawnStarter's 2026 national average is $5,000 installed

New pipe being laid in an excavated trench during a sewer line replacement

Sewer Line Replacement Cost

$2,000 – $6,500

Full sewer line replacement — Angi's 2026 national average across verified projects is $3,319

Worker welding a large pipe in an open trench

Main Water Line Replacement Cost

$1,700 – $3,500

Main water line replacement typically costs $1,700 – $3,500 for a standard residential service line from the meter to the house, with about $2,500 the figure most jobs land near — between Angi's $1,703 national average and HomeGuide's $3,500 chart average. This guide covers the supply line that brings water in; the sewer line that carries water away is a separate job, covered in our sewer line replacement guide.

Tall white water-well drilling rig with its drill pipe in the ground, dust rising, two workers in ear protection watching

Water Well Drilling Cost

$5,500 – $10,500

A complete residential well about 150–200 feet deep — drilling, casing, pump, pressure tank and permits together

Worker power washing grime from roof tiles on a residential roof

Roof Cleaning Cost

$300 – $650

Professional roof cleaning — Angi's 2026 national average is $461