Paver Driveway Installation cost at a glance
- Typical range: $6,000 – $18,000
- Most homeowners pay: around $12,000
- Per square foot: $10–$30 per sq ft
Cross-checked against three published sources for this project. Sources used for this page: Angi, 'How Much Does a Paver Driveway Cost? [2026 Data]', updated Oct 15, 2026 — typical $6,000–$18,000; national average $12,000 (total); installed $10–$30 per sq ft; by type (standard $10–$18, permeable $15–$25, decorative $18–$30, custom patterns $20–$35 per sq ft); labour $50–$80 per hour or $5–$15 per sq ft; permits $50–$300; sealing $1–$3 per sq ft every 3–5 years; minor repairs $200–$500, extensive repairs $1,000–$2,500. NOTE: Angi's text writes the $12,000 average as 'per square foot' — a unit error; it is a $12,000 total and is printed as a total here. HomeGuide, 'How Much Does It Cost to Install Driveway Pavers? (2026)', updated Jan 6, 2026 — installed $10–$30 per sq ft (agrees exactly with Angi); materials $4–$20 per sq ft; labour $6–$10 per sq ft; 2-car (576 sq ft) $5,700–$17,200; component bands (pavers $2–$17, base $2–$3, edging $1–$2 per linear ft); install time 3–5 days, usable immediately; lifespan 25–75 years; sealing $1.50–$3.25 per sq ft; concrete removal $2–$6 per sq ft; replace concrete with pavers $12–$35 per sq ft. Bob Vila, 'How I Solved My Home's Driveway Dilemma', Oct 31, 2025 — per-material installed bands (concrete up to $25, brick up to $30, cobblestone up to $70, travertine $15–$27, flagstone ~$30 per sq ft); lifespans by material. HomeAdvisor corroboration only — same Angi Inc. data family as Angi, not an independent confirmation of the $12,000 average. Disagreements published, not averaged: per-sq-ft ceiling $30 (Angi + HomeGuide) vs $70 (HomeAdvisor/Bob Vila cobblestone and premium stone — a scope gap); brick tops $22/$25/$30/$45 across sources. HomeGuide's 69% ROI claim is single-source with no methodology. Breakdown shares are derived from the worked example below. Checked November 2026.. Sources last checked: October 2026 — HomeAdvisor, HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Budget — standard concrete pavers | $6,000 – $8,400 | Standard concrete pavers in a simple running-bond pattern on a straight rectangle, minimal cutting, no border inlay and no sealing upgrade beyond the initial seal. $10–$14 per sq ft for a 600 sq ft driveway. |
| Standard — concrete or brick, patterned | $9,000 – $12,000 | Concrete or brick pavers in a herringbone or basketweave pattern with a soldier-course border, standard base and the initial seal included. The $12,000 most-pay example sits at the top of this tier, at $20 per sq ft. |
| Premium — stone, travertine, porcelain or permeable | $12,600 – $18,000 | Natural stone, travertine, porcelain or permeable pavers in a custom or decorative pattern, with borders and inlays, a drainage upgrade and a premium seal. $21–$30 per sq ft. Beyond this tier, cobblestone and high-end custom work run past $18,000 — a 600 sq ft cobblestone job can reach $30,000 (HomeGuide). |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Pavers | 35% of total | $4,200 for concrete pavers — 600 sq ft at $7.00 per sq ft, inside HomeGuide's $2–$17 per sq ft pavers band and Bob Vila's $4–$10 concrete material band. Share derived from the worked example below. |
| Base materials | 13% of total | $1,500 for base materials (geotextile fabric, Class II road base, bedding sand and polymeric joint sand) — $2.50 per sq ft, inside HomeGuide's $2–$3 per sq ft base band. Share derived from the worked example below. |
| Installation labour | 40% of total | $4,800 for installation labour — $8.00 per sq ft, inside HomeGuide's $6–$10 and Angi's $5–$15 per sq ft labour bands. Share derived from the worked example below. |
| Edge restraints | 1% of total | $150 for edge restraints — 100 linear feet at $1.50 per foot, inside HomeGuide's $1–$2 per linear foot edging band. Share derived from the worked example below. |
| Permit | 2% of total | $200 for the permit — inside Angi's $50–$300 and HomeGuide's $50–$250 permit bands. Share derived from the worked example below. |
| Initial sealing | 7% of total | $900 for initial sealing (pro, including pressure wash and joint sand) — $1.50 per sq ft, inside HomeGuide's $1.50–$3.25 and Angi's $1–$3 per sq ft sealing bands. Share derived from the worked example below. |
| Delivery and cleanup | 2% of total | $250 for delivery and final cleanup — about $0.42 per sq ft combined, inside HomeGuide's delivery $0–$0.70 plus clean-up $0.15–$0.30 per sq ft bands. Share derived from the worked example below. |

What moves the price most
Worked example — $12,000 most-pay driveway (600 sq ft two-car, standard concrete pavers, new build on a clear site): pavers $4,200 (35%) + base materials $1,500 (12.5%) + installation labour $4,800 (40%) + edge restraints $150 (1.25%) + permit $200 (1.7%) + initial sealing $900 (7.5%) + delivery and cleanup $250 (2.1%) = $12,000, or $20.00 per sq ft — inside the published $10–$30 per sq ft band. Every line sits inside its published band; the breakdown bar rounds the shares to whole numbers. Old-driveway removal is NOT in this example: if removal is needed, add HomeGuide's $2–$6 per sq ft ($1,200–$3,600 for 600 sq ft). Where sources disagree: the per-sq-ft ceiling — Angi and HomeGuide cap the typical band at $30 per sq ft, while HomeAdvisor runs to $70 and Bob Vila puts cobblestone up to $70 installed; the $30–$70 gap is a scope gap (standard-to-decorative vs cobblestone, premium stone and permeable systems), not an average. Brick pavers: Angi $12–$22, HomeGuide $10–$25, HomeAdvisor $10–$45 (its $45 top is the outlier). Lifespan: 25–75 years (HomeGuide); 30–50 years typical (HomeAdvisor); cobblestone up to 75–100+ years. Install time: 3–5 days for a pro, usable immediately (HomeGuide); a 2-car DIY job takes 2–3 weekends with help (Angi). Upkeep: reseal every 3–5 years at $1–$3 per sq ft (Angi); minor repairs $200–$500, extensive resetting $1,000–$2,500 (Angi). HomeGuide's 69% ROI claim is single-source with no methodology given, so it is not presented as a verified return. Related costs: concrete driveway, asphalt driveway, gravel driveway installation, paver patio installation and driveway sealing.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does a paver driveway cost?
Most homeowners pay $6,000–$18,000, with Angi's 2026 national average at $12,000. Installed cost runs $10–$30 per sq ft (Angi and HomeGuide agree exactly). A 600 sq ft two-car driveway in standard concrete pavers works out to $12,000.
How long does it take to install a paver driveway?
3–5 days for a professional install, and the driveway is usable immediately (HomeGuide). A DIY job for a two-car driveway takes 2–3 weekends with help (Angi).
How long do paver driveways last?
25–75 years (HomeGuide); 30–50 years is typical (HomeAdvisor). Cobblestone lasts longest, up to 75–100+ years (HomeAdvisor/Bob Vila). Concrete pavers last 25–50 years and brick 25–30+ years (Bob Vila).
Do I need a permit for a paver driveway?
Permit and inspection fees run $50–$300 (Angi) or $50–$250 (HomeGuide). A permit is often not required when paving an existing driveway of the same size (HomeGuide).
How much does it cost to replace a concrete driveway with pavers?
$12–$35 per sq ft including demolition, sub-base, materials and installation (HomeGuide). Concrete removal alone costs $2–$6 per sq ft, or $1,200–$3,500 per driveway (HomeGuide).
What is the cheapest paver for a driveway?
Concrete pavers: material $1.25–$20 per sq ft (HomeGuide) or $4–$10 (Bob Vila), installed $10–$20 (HomeGuide) or up to $25 (Bob Vila). They are the cheapest paver type across all three sources.






