Window Treatment Installation cost at a glance
- Typical range: $1,500 – $3,500
- Most homeowners pay: around $2,500
- Prices vary most by: The treatments themselves — blinds, shades and drapes (65–75% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: Angi's window treatment cost guide, updated October 8, 2026 (national average $1,016 across 3,219 verified projects, most pay $167–$1,870 per window; blinds $30–$200, shades $50–$150, shutters $150–$700, drapes $300–$1,500, motorized $150–$2,000; labor $20–$100 per window; removal $20–$50 per window), HomeGuide's window treatment cost guide, published March 17, 2025 (average $30–$600 per window installed; blinds $30–$600, curtains $50–$500, shades $60–$600, plantation shutters $150–$800; labor $20–$250) and Engineer Fix's window treatment cost guide (blinds $35–$95, shades $200–$600, drapes $100–$1,500+, shutters $200–$1,500+ per window; installation $20–$100 per window; motorization adds $150–$1,200 per window; no update date shown on the page). Synthesized typical = the $1,500–$3,500 overlap for about 10 standard windows in a mixed mid-range set, with $2,500 most-pay as the labelled midpoint of that band, matching the worked example; Angi's $1,016 average is cited with its scope ambiguity noted. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi, Engineer Fix. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| A few windows, ready-made blinds or shades | $300 – $800 | Three or four standard windows in ready-made blinds or roller shades, measured and fitted. Angi prices blinds at $30–$200 per window and shades at $50–$150, Engineer Fix puts basic manual blinds at $35–$95, and HomeGuide prices prefab blinds installed at $30–$200 — a small room is a few hundred dollars, not a whole-house figure. |
| Whole home, standard treatments (about 10 windows) — the typical job | $1,500 – $3,500 | The typical project on this page. A mixed mid-range window runs about $100–$250 installed — Angi's blinds at $30–$200 and shades at $50–$150, HomeGuide's $30–$600 per-window band, Engineer Fix's shades at $200–$600 — so ten windows plus measuring, hardware and removal land in this band, with curtains on the main window instead of a tenth blind. |
| Custom shutters, drapes or motorized treatments | $3,500 – $8,000+ | Where the treatment stops being a commodity. HomeGuide prices custom curtains at $300–$4,000 per window and custom shades at $250–$2,600, Angi prices shutters at $150–$700 and drapes at $300–$1,500 with motorized systems at $150–$2,000, and Engineer Fix puts shutters at $200–$1,500+ with motorization adding $150–$1,200 per window — price this tier only on a measured quote. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| The treatments themselves — blinds, shades and drapes | 65–75% | The product is the largest line: Angi's type table runs blinds $30–$200, shades $50–$150, shutters $150–$700 and drapes $300–$1,500 per window, HomeGuide runs blinds $30–$600, curtains $50–$500 and shades $60–$600, and Engineer Fix runs blinds $35–$95, shades $200–$600, drapes $100–$1,500+ and shutters $200–$1,500+ — treatment type moves this line more than anything else on the page. Share is an editorial estimate derived from the published dollar lines, not a quoted figure. |
| Installation labor | 15–20% | Angi prices professional installation at $20–$100 per window, HomeGuide at $20–$250 depending on type and size, and Engineer Fix at $20–$100 for basic products rising to $150–$300 per unit for shutters or motorized systems — a standard whole home takes a skilled team a single day, custom or motorized work longer. Share is an editorial estimate derived from the published dollar lines. |
| Measuring, brackets and hardware | 5–10% | The parts that make a treatment hang straight rather than just arrive: Angi prices decorative hardware — rods, finials, brackets — at $20–$200 and HomeGuide prices curtain rods at $3–$40+ each, before the measuring visit itself. Share is an editorial estimate derived from the published dollar lines. |
| Old treatment removal and disposal | 5–10% | Taking the old blinds or drapes down runs $20–$50 per window in Angi's figures, and HomeGuide notes some installers include it while others charge it separately — get it named in the quote either way. Share is an editorial estimate derived from the published dollar lines. |
| Motorization and add-ons — only when chosen | 0–15% | The optional line: Angi prices motorization or smart controls at $150–$1,200 and blackout or thermal liners at $40–$200, HomeGuide prices motorized blinds at $300–$1,000 and motorized shades at $350–$1,000, and Engineer Fix puts motorization at $150–$1,200 added per window — a standard job carries 0% here, a motorized one carries the top of the range. |

What moves the price most
Treatment type is the budget. Angi's type table runs blinds $30–$200, shades $50–$150, shutters $150–$700 and drapes $300–$1,500 per window, and HomeGuide's runs blinds $30–$600, curtains $50–$500 and shades $60–$600 — blinds and shades are the budget end, drapes and shutters the dear end, and mixing types across rooms is how most whole-home jobs land in the middle. Window size is the second lever: Angi prices a standard 24-by-36 at $40–$140 against $170–$500 for an oversized 48-by-72, $300–$800 for bay or arched windows and $500–$1,200 for floor-to-ceiling, and Engineer Fix adds a 25–50% surcharge on windows wider than 72 inches. Stock versus custom is the third: ready-made blinds fit standard windows off the shelf, while HomeGuide prices custom shades at $250–$2,600 per window and custom curtains at $300–$4,000 — a non-standard window is a custom price whether you planned it or not. Motorization is the fourth: Angi prices it at $150–$1,200 per window and Engineer Fix at $150–$1,200 added, and hardwired motors can need an electrician, so motorize the hard-to-reach windows first. Worked example at the most-pay figure: 6 windows mid-range blinds at $110 each $660 + 3 windows cellular shades at $200 each $600 + 1 large window with drapes and rod $500 + installation labor, 10 windows at $40 each $400 + measuring, brackets and hardware $140 + old treatment removal and disposal, 10 windows at $20 each $200 = $2,500. For blinds alone see our blinds installation guide, for shutters see our plantation shutters installation guide, for the windows behind them see our window replacement guide, for tinted glass as an alternative see our window tinting guide, and for motorized or smart-home control see our smart home installation guide.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does it cost to install window treatments?
About $1,500–$3,500 is the typical band on this page for treatments across about 10 standard windows, with most homeowners paying around $2,500. Angi's national average is $1,016 across 3,219 verified projects with most paying $167–$1,870 per window, and HomeGuide puts the average at $30–$600 per window installed. (Angi; HomeGuide)
How much do window treatments cost per window?
HomeGuide averages $30–$600 per window installed, and Angi's most-paid band is $167–$1,870 per window — the spread is the treatment type: Angi prices blinds at $30–$200, shades at $50–$150, shutters at $150–$700 and drapes at $300–$1,500 per window. (Angi; HomeGuide)
Are blinds, shades or shutters cheapest?
Blinds are cheapest — Angi prices them at $30–$200 per window and Engineer Fix at $35–$95 for basic manual models. Shades sit in the middle at $50–$150 in Angi and $200–$600 in Engineer Fix, and shutters are dearest at $150–$700 in Angi, $150–$800 in HomeGuide and $200–$1,500+ in Engineer Fix. (Angi; Engineer Fix; HomeGuide)
How much does motorization add?
Angi prices motorization or smart controls at $150–$1,200 per window and Engineer Fix at $150–$1,200 added per window. HomeGuide prices motorized blinds at $300–$1,000 per window and motorized shades at $350–$1,000, including installation. (Angi; HomeGuide; Engineer Fix)
How long does it take to install window treatments?
HomeGuide puts professional installation at 10 minutes to 2 hours per window depending on size and type, and Angi notes a skilled team finishes a whole home in a single day — custom or motorized treatments take longer than a simple blind or curtain rod. (HomeGuide; Angi)
Can I install window treatments myself?
Yes for simple ready-made blinds and shades — Angi prices the saving at $20–$100 per window of labor, and Engineer Fix notes the same saving. The risk is the measure: a custom treatment cut to a guessed size fits neither way and can void the warranty, so most homeowners hire the measure and fit for custom or motorized work. (Angi; Engineer Fix)






