Home › Cost Guides › Plantation Shutter Installation
Cost Guide

How Much Does a Plantation Shutter Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$1,400 – $4,800
Most homeowners pay around $3,000 · Plantation shutter installation typically costs $1,400 – $4,800 for a standard home's main living-area windows, about 8–10 windows, with about $3,000 the figure most standard jobs land near — Angi prices estate shutter installation at $1,341–$4,792 with a $3,028 average across 338 verified projects, and HomeGuide prices plantation shutters at $150–$800 per window installed with 8–10 windows at $1,200–$8,000. The $1,400–$4,800 typical band is Angi's project band rounded, and $3,000 is Angi's average rounded — a few small vinyl windows can come in below it, and hardwood shutters on large or shaped windows across a whole house cost far more, while the panels, labor and fitting below are all inside the total.
typical
$1,400$4,800
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Bright sunroom with white plantation shutters on two walls and two chairs

Plantation Shutter Installation cost at a glance

  • Typical range: $1,400 – $4,800
  • Most homeowners pay: around $3,000
  • Prices vary most by: Shutter panels (material) (55–70% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: Angi's plantation shutters cost guide, updated Sep 23, 2026 (estate shutter installation $1,341–$4,792, national average $3,028 across 338 verified projects; material and labor about $20–$45 per sq ft; hardwood $250–$600, faux wood $150–$400, PVC $75–$300, vinyl $75–$150 per window), HomeGuide's plantation shutters cost guide ($150–$800 per window installed; real wood $200–$800, composite $175–$650, vinyl $150–$500 per window; materials alone $100–$650; labor $50–$150 per window; 8–10 windows $1,200–$8,000; 24-by-36 wood $200–$400, 36-by-60 wood $410–$700 installed), EngineerFix's plantation shutter cost guide (real wood $25–$45 per sq ft; composite $20–$25; vinyl or PVC $15–$20 per sq ft or $75–$300 per window; motorization $200–$500 per window; professional labor $50–$200 per shutter).. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Plantation Shutter Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Vinyl or PVC, about 8 windows — the budget route$1,200 – $2,400The cheap end: Angi prices vinyl at $75–$150 per window and PVC at $75–$300, and HomeGuide prices vinyl installed at $150–$500 per window — moisture-proof and light, which is why vinyl suits bathrooms and kitchens, at roughly the bottom of the per-window ladder
Faux-wood or composite, 8–10 windows — the typical job$1,400 – $4,800The shared band itself: Angi prices a standard estate-shutter project in this band with a $3,028 average, and HomeGuide prices composite at $175–$650 per window installed — the wood look with better moisture resistance, which is the common job and the band this page is built on
Hardwood, custom shapes, whole home — the top end$4,000 – $8,000The expensive end: HomeGuide prices 8–10 professionally installed windows to $8,000, Angi prices hardwood at $250–$600 per window, and EngineerFix prices real wood at $25–$45 per sq ft — arched, bay and oversize windows need custom frames, and hardwood is finished, not wrapped, which is what pushes a job past the standard band

Where the money goes

Part of the jobShareNote
Shutter panels (material)55–70% of totalThe largest portion by far: Angi's per-window material averages run from vinyl at $75–$150 and PVC at $75–$300 through faux wood at $150–$400 to hardwood at $250–$600, and HomeGuide prices materials alone at $100–$650 per window — the material ladder is the price ladder
Installation labor15–25% of totalThe fitting: HomeGuide prices professional installation labor at $50–$150 per window, about an hour per pair for a standard window — precise measuring and frame fitting are the work, and a poor fit shows on every window
Frames, divider rails and custom fitting10–20% of totalThe parts that make shutters look built-in: frames sized to each opening, divider rails on tall windows, and custom work for arches, bays and French doors — standard rectangles stay near the bottom of this line, shaped windows pay the top
Measuring, delivery and finish5–10% of totalThe small lines: professional measuring, delivery of made-to-measure panels, and paint or stain finish — stock sizes skip the measuring line but rarely fit as well, which is why most shutter jobs are made to order
Shutter panels (material) · 55–70%Installation labor · 15–25%Frames, divider rails and custom fitting · 10–20%Measuring, delivery and finish · 5–10%
Estimator’s note: on a plantation shutter installation, shutter panels (material) is usually where quotes swing most (55–70% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A tall white shuttered window in a bright room, sunlight streaming through: HomeGuide prices plantation shutters at $150–$800 per window installed, and labor at $50–$150 per window
A tall white shuttered window in a bright room, sunlight streaming through: HomeGuide prices plantation shutters at $150–$800 per window installed, and labor at $50–$150 per window

What moves the price most

Material is the first driver: Angi's per-window averages run from vinyl at $75–$150 and PVC at $75–$300 through faux wood at $150–$400 to hardwood at $250–$600, and HomeGuide's installed ladder runs the same way at $150–$500 for vinyl, $175–$650 for composite and $200–$800 for real wood. Window size is second: HomeGuide's size table prices a 24-by-36-inch wood shutter at $200–$400 installed against $410–$700 for a 36-by-60-inch window, because shutters are sold by the opening, not by the room. Count and shape are third: Angi prices by square footage at $20–$45 per sq ft, and arched, bay and French-door openings need custom frames that standard rectangles do not. Finally, motorization closes the bill: EngineerFix prices motorized operation at $200–$500 per window for hardware and installation — a convenience line that can exceed the labor line on a large job, and one to decide before measuring, since it changes the frame.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
White interior louvered shutters behind a desk with a globe: louver width and material set the price — Angi averages hardwood at $250–$600 per window against vinyl at $75–$150
White interior louvered shutters behind a desk with a globe: louver width and material set the price — Angi averages hardwood at $250–$600 per window against vinyl at $75–$150

Frequently asked questions

How much do plantation shutters cost per window?

About $150–$800 per window installed in HomeGuide, depending on material and size — vinyl at the bottom, hardwood at the top. Angi's material averages tell the same story: vinyl $75–$150, PVC $75–$300, faux wood $150–$400 and hardwood $250–$600 per window before labor at $50–$150 per window in HomeGuide.

How much does it cost to shutter a whole house?

For a standard main living-area job of 8–10 windows, the $1,400–$4,800 band on this page, with most near $3,000 — Angi's $1,341–$4,792 project band and $3,028 average. HomeGuide prices 8–10 professionally installed windows at $1,200–$8,000, the wide span reflecting small vinyl openings at one end and large hardwood windows at the other.

Vinyl or hardwood plantation shutters — which is the better value?

Vinyl where moisture matters, hardwood where looks matter most: Angi prices vinyl at $75–$150 per window against hardwood at $250–$600, and HomeGuide notes vinyl suits bathrooms and humid rooms while hardwood gives the most natural, long-lasting finish. Faux wood at $150–$400 in Angi splits the difference for most living areas.

Can I install plantation shutters myself?

Yes, for stock sizes on square windows: the saving is HomeGuide's $50–$150 per window of labor. Made-to-measure shutters are usually fitted by the supplier, because the measuring must be exact — a frame a quarter inch out shows on every window — and professional fitting often protects the product warranty.

Do plantation shutters help with energy bills?

They help modestly, as insulation and shading rather than as a heating system: HomeGuide notes light control, noise reduction and improved energy efficiency among their benefits, and the solid panel with a closed louver blocks summer sun and winter drafts better than an open blind. Treat any specific savings percentage in a sales quote as a claim to check, not a published figure — the guides price the shutters, not the bill saving.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Plantation Shutter Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Large insulated treatment tanks with stainless pipework and valves

Water Softener Installation Cost

$1,000 – $2,800

The typical project is a standard single-tank salt-based softener plumbed into the main line where it enters the house — unit sized to the household, bypass valve, drain connection and a first fill of salt. Salt-free conditioners and dual-tank or whole-house filtration combinations are priced in the tiers below.

Dining room with a three-shade chandelier over a wood table and a recessed ceiling light

Light Fixture Installation Cost

$150 – $450

The typical project is one standard ceiling or wall fixture installed or replaced by an electrician on existing wiring — a mid-range fixture, the old one removed, connections tested and the switch confirmed working. New locations, new wiring and chandelier work are priced in the tiers below.

Kitchen island with two large gold dome pendant lights hanging over a marble counter

Pendant Light Installation Cost

$100 – $300

Installing one standard pendant light at an existing ceiling junction box — fixture and electrician’s installation included; a row over an island, a new box or a designer fixture priced separately

Finished basement recreation room with a staircase and wood-look flooring

Sump Pump Installation Cost

$1,000 – $1,800

The typical project is a new standard installation in a basement: a pit basin set into the floor, a 1/3 to 1/2 HP submersible pump, a check valve and a discharge line run outside. Replacing a pump in an existing pit is the cheaper job priced in the first tier.

Rear of a house at dusk with the lights on and a wide yard beside it

Generator Installation Cost

$6,000 – $11,000

The typical project is a whole-house standby generator in the 14 to 22 kW range, permanently installed on a pad beside the house — the unit, a transfer switch, the fuel connection, the pad, permits and start-up. Portable and partial-home units price far lower and liquid-cooled units far higher, and both are tiered separately below.

Bedroom with a tray ceiling, ceiling fan and carpeted floor

Spray Foam Insulation Cost

$2,000 – $4,500

The typical project is professional spray foam over about 1,000 square feet of attic floor, roof deck, walls or rim joists — priced here per project and per square foot. Spray foam is the premium insulation material, and this page separates it from the blown-in and batt work priced on the attic insulation page: foam is the air-sealing material, and its price is set by board feet, not just by area.