Home › Cost Guides › Kitchen Addition
Cost Guide

How Much Does a Kitchen Addition Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$48,000 – $95,000
Most homeowners pay around $70,000 · Adding a kitchen — a ground-level extension with its own foundation, framing and roof tie-in plus a full kitchen fit-out — typically costs $48,000–$95,000 for a mid-size job of about 200 sq ft, with most homeowners paying around $70,000.
typical
$48,000$95,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Bright white kitchen with a central island, glass pendant lights and stainless steel appliances

Kitchen Addition cost at a glance

  • Typical range: $48,000 – $95,000
  • Most homeowners pay: around $70,000

Cross-checked against two published sources for this project. Sources used for this page: Block Renovation's 'Building Kitchen Additions: Costs & Design' (published August 21, 2026) prices professionally built kitchen additions at $300–$750+ per sq ft, bump-outs of 40–100 sq ft at $20,000–$50,000 (complex projects $80,000+), full additions of 150–300+ sq ft at $300–$750+/sq ft, permits $1,000–$10,000+, design $2,000–$20,000+, engineering $1,000–$5,000+ and a 10–20% contingency; Angi's 'How Much Does a Home Addition Cost? [2026 Data]' (updated October 28, 2026; 5,609 verified projects) gives a national average addition of $50,991, most pay $21,886–$83,367, build-out $80–$200/sq ft, a kitchen room-type average of $55,000, labour 40–60% of total, kitchen cabinets $2,000–$11,000 and permits averaging $1,300 (range $150–$7,500); Cedreo's 'Kitchen Addition Costs, Ideas & Planning Guide for PROS' (updated August 18, 2026) gives standard builds at $100–$300/sq ft, high-end custom at $300–$500/sq ft, bump-outs $20,000–$50,000, a mid-size 200 sq ft kitchen addition averaging $48,000–$95,000, luxury expansions exceeding $150,000, permits $400 to over $6,500 and labour at about 65–70% of total with cabinets 30–40% and appliances 15–20% of materials; HomeGuide's bump-out guide (updated June 3, 2025) corroborates the low end only for shell work excluding plumbing, electrical and HVAC ($5,000–$35,000). Where sources disagree — notably per-sq-ft bands (Block $300–$750+ vs Cedreo $100–$300 standard) and labour share (Angi 40–60% vs Cedreo about 65–70%) — the page publishes the honest overlap band and names the disagreement. Synthesized typical = Cedreo's published $48,000–$95,000 range for a mid-size 200 sq ft kitchen addition, with $70,000 most-pay inside that band and above Angi's $55,000 kitchen average. Breakdown shares are derived from the worked example, not published figures. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Kitchen Addition cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Kitchen bump-out$20,000 – $50,000Pushes one exterior wall out by a few feet (40–100 sq ft) — enough for an island, a breakfast nook, an extra run of cabinets or a wider walkway. Often cantilevered from the existing floor structure; deeper push-outs need new footings or a foundation. Complex projects with moved plumbing can reach $80,000+. Block and Cedreo publish the identical $20,000–$50,000 band.
Mid-range kitchen addition — the typical job$48,000 – $95,000A ground-level extension of about 200 sq ft with its own foundation, framing, roof tie-in and full kitchen fit-out — new cabinets, counters, appliances, sink and range in the new space, plus plumbing, electrical and HVAC extensions. This is the typical project the most-pay figure describes. (Cedreo; consistent with Block's $300–$750+ per sq ft arithmetic.)
Large / full kitchen addition$90,000 – $225,000+A substantial new kitchen of 300+ sq ft with a dining zone, walk-in pantry or multiple cooking and prep zones, often combined with opening up the existing kitchen into an open-concept layout — the extra wall-removal, beam and footing work sits on top of the per-sq-ft price. Luxury finishes push past $150,000. (Block: 300 sq ft at $300–$750+ per sq ft; Cedreo: luxury expansions exceed $150,000.)

Where the money goes

Part of the jobShareNote
Foundation, framing, roof & exterior shell32% of totalExcavation, footings, walls, roof tie-in, windows, siding and insulation — the structural shell is the largest single share. Share derived from the worked example below, not a published percentage.
Cabinets & countertops22% of totalCedreo puts cabinets at 30–40% of materials — the largest material line item — and Angi prices kitchen cabinets alone at $2,000–$11,000. Share derived from the worked example below.
Plumbing, electrical, HVAC & ventilation16% of totalSink and dishwasher lines, new circuits, range hood and heating and cooling extension; Cedreo puts plumbers and electricians at 20–30% of labour. Share derived from the worked example below.
Appliances10% of totalCedreo puts appliances at 15–20% of materials — range, refrigerator and dishwasher for the new space. Share derived from the worked example below.
Flooring, tile, paint & finishes10% of totalFlooring, tile backsplash, paint and trim for the new room. Share derived from the worked example below.
Design, permits & inspections10% of totalBlock prices design at $2,000–$20,000+, engineering at $1,000–$5,000+ and permits at $1,000–$10,000+; Angi averages permits at $1,300. Share derived from the worked example below.
Foundation, framing, roof & exterior shell · 32%Cabinets & countertops · 22%Plumbing, electrical, HVAC & ventilation · 16%Appliances · 10%Flooring, tile, paint & finishes · 10%Design, permits & inspections · 10%
Estimator’s note: on a kitchen addition, foundation, framing, roof & exterior shell is usually where quotes swing most (32% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Framing going up — the foundation, framing, roof and exterior shell are the largest single share of a kitchen addition, about 32% of the typical $70,000 job
Framing going up — the foundation, framing, roof and exterior shell are the largest single share of a kitchen addition, about 32% of the typical $70,000 job

What moves the price most

Size in sq ft is the single biggest driver, but per-sq-ft math misleads on small jobs: a 40 sq ft bump-out still needs plans, permits, an exterior-wall opening, framing, roofing, insulation and inspections, so fixed costs spread over fewer feet make small additions expensive per sq ft. (Block; Cedreo.) Bump-out versus full addition: a cantilevered bump-out (40–100 sq ft, $20,000–$50,000) avoids new foundation work; a full addition needs excavation, footings and foundation, roof connection and utility extensions, priced at $300–$750+ per sq ft. (Block; Cedreo; HomeGuide.) Moving plumbing and gas: keeping the sink, dishwasher and refrigerator near existing supply and drain lines keeps rough plumbing simple; moving the sink across the room or into a new island means opening floors and extending supply, waste and vent lines, and relocating the kitchen entirely is the most expensive variant. (Block; Cedreo.) Fixture and appliance grade: stock cabinetry and standard appliances versus custom millwork, premium stone and integrated appliances is where homeowners retain the most control over the budget; Cedreo puts cabinets at 30–40% of materials and appliances at 15–20% of materials, and Angi prices kitchen cabinets alone at $2,000–$11,000. (Block; Cedreo; Angi.) Foundation type and site conditions: cantilevered, slab, or full foundation; easy machine access on a level yard versus excavating beside a tightly spaced urban house or on a steep site. (Block; HomeGuide.) The opening into the existing house: a narrow doorway and a 16-foot opening are completely different structural jobs — a wide load-bearing wall opening needs an engineer-specified beam, posts and new footings below. (Block.) Permits, design and location: permits run $150–$7,500 (Angi, average $1,300), $400 to over $6,500 (Cedreo), or $1,000–$10,000+ (Block) depending on municipality; design and architecture $2,000–$20,000+ and engineering $1,000–$5,000+ (Block) — keep a 10–20% contingency outside the finish budget (Block). Roof, windows and electrical capacity: a simple shed or gable roof tie-in is cheaper than a multi-valley roof; a wall of glass or oversized sliding doors costs far more than one standard window; new countertop outlets, lighting, ventilation and high-draw appliances may need extra circuits, and an older panel can become the limiting factor. (Block.) Worked example at the most-pay figure: foundation, framing, roof and exterior shell $22,400 + cabinets and countertops $15,400 + plumbing, electrical, HVAC and ventilation $11,200 + appliances $7,000 + flooring, tile backsplash, paint and trim $7,000 + design, structural engineering, permits and inspections $7,000 = $70,000. For the general addition see our home addition guide, for the room it extends see our kitchen remodel guide, for the cabinets see our kitchen cabinets guide, for the counters see our countertop installation guide, and for the island see our kitchen island installation guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A white marble-style island — islands are the most common reason homeowners push a kitchen wall outward. Portrait source — 1200x800 centre crop keeps the island, re-verified after processing
A white marble-style island — islands are the most common reason homeowners push a kitchen wall outward. Portrait source — 1200x800 centre crop keeps the island, re-verified after processing

Frequently asked questions

How much does a kitchen addition cost?

A typical mid-size kitchen addition costs $48,000–$95,000, with most homeowners paying around $70,000 for roughly 200 sq ft with a full kitchen fit-out. Small bump-outs start at $20,000–$50,000, while large full additions run $90,000–$225,000 or more. (Block; Cedreo; Angi)

How much does a kitchen addition cost per square foot?

Block's 2026 benchmark for a professionally built kitchen addition is $300–$750+ per sq ft; Cedreo puts a standard build at $100–$300 per sq ft and high-end custom work at $300–$500 per sq ft. The gap reflects different scopes and markets — Block's figure is for permitted, fitted-out additions in mid- to high-cost metros, while Cedreo's lower band is a standard build — so get local bids rather than multiplying a single rate. (Block; Cedreo)

How much does a kitchen bump-out cost?

About $20,000–$50,000 for a typical 40–100 sq ft kitchen bump-out, with complex projects that move plumbing or need new foundation work reaching $80,000 or more. A bare shell without plumbing or electrical changes can cost less — HomeGuide's $5,000–$35,000 band explicitly excludes that trade work. (Block; Cedreo; HomeGuide)

Do I need permits for a kitchen addition?

Yes — a kitchen addition needs structural, electrical, plumbing and possibly gas permits, and fees vary widely by municipality: Angi reports an average of $1,300 (range $150–$7,500), Cedreo $400 to over $6,500, and Block $1,000–$10,000+. Design and engineering are separate costs on top. (Angi; Block; Cedreo)

How long does a kitchen addition take?

Design and planning take 1–3 months and permitting several weeks to several months before construction starts; on-site construction runs 4–12 weeks for a bump-out and 2–6+ months for a full addition, with larger or more complicated projects running longer. Cabinets, windows, appliances and exterior doors can have long lead times, so order them against the construction calendar. (Block)

What makes a kitchen addition so expensive compared with other rooms?

Kitchens are the most expensive room to add per square foot because cabinetry, appliances, plumbing, ventilation, electrical circuits, lighting and countertops all sit on top of the structural shell — Angi's own room table prices a kitchen addition at $55,000 against $30,000 for a dining room, and Block notes the same systems-and-finishes stacking is why kitchens run $300–$750+ per sq ft against about $200–$600 for additions generally. (Block; Angi; Cedreo)

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Kitchen Addition cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Smart-home camera, sensor and a round white detector on a neutral background

Carbon Monoxide Detector Installation Cost

$500 – $1,200

A pro-installed, hardwired interconnected carbon monoxide system — 5 to 7 combination smoke/CO units wired into the home's circuits — typically costs $500–$1,200, with most homeowners paying around $600, about $120 per unit installed.

Red-tile roof with two dormer windows under a blue sky

Dormer Addition Cost

$6,000 – $25,000

Adding a dormer — typically a shed or gable dormer of about 100 sq ft with two standard windows, framed, roofed, insulated and finished — typically costs $6,000–$25,000, with most homeowners paying around $15,000, about $80–$150 per sq ft for common types.

Elegant fitted walk-in closet with wood panelling, hanging clothes and a centre island

Walk-In Closet Installation Cost

$3,500 – $9,000

Building out a walk-in closet — typically a ~60 sq ft space with built-in shelving and hanging rods, drawers and shoe storage, new lighting and a new door — typically costs $3,500–$9,000, with most homeowners paying around $5,000, about $17–$50 per sq ft for the custom system or $150–$450 per linear ft of shelving wall.

Wooden beam ceiling structure seen from below

Ceiling Beam Installation Cost

$1,500 – $6,500

Installing decorative ceiling beams — typically 3–5 polyurethane faux beams in a living or dining room, about 75 linear ft, professionally installed and finished — typically costs $1,500–$6,500, with most homeowners paying around $3,000, about $15–$35 per linear ft installed for faux beams.

Open-plan living room with a vaulted ceiling, exposed timber trusses, skylights and a stone fireplace

Vaulted Ceiling Installation Cost

$18,000 – $30,000

Vaulting a ceiling in an existing home — typically a 20×20 ft living room opened to the roofline as a cathedral vault, with new rafters and a ridge beam, insulation and drywall — typically costs $18,000–$30,000, with most homeowners paying around $20,000, about $50–$70 per sq ft.

Wood-panelled walk-in closet fitted with an open organizer system of shelves and hanging rods

Closet Organizer Installation Cost

$600 – $2,500

Installing a closet organizer system — laminate or MDF shelving, hanging sections and a drawer bank fitted into a standard reach-in closet that already exists, professionally installed — typically costs $600–$2,500, with most homeowners paying around $1,550, about $50–$150 per linear foot.