Home › Cost Guides › Slate Roof Installation
Cost Guide

How Much Does a Slate Roof Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$15,000 – $35,000
Most homeowners pay around $22,000 · Slate roof installation typically costs $15,000 – $35,000 for a standard roof of about 1,500 square feet, at about $10–$30 per square foot installed, with about $22,000 the figure most standard jobs land near — Angi averages $13,348 across its verified projects with most at $4,389–$22,377, HomeGuide prices natural slate at $10–$30 per square foot installed with an average home at $22,000–$70,000, and HomeBuddy puts most full installations at $15,000–$45,000 or more. Angi's lower average reflects its mix of synthetic and smaller roofs, not a cheaper natural-slate job — and the slate, underlayment, specialized labor, tear-off and any structural reinforcement below are all inside the total.
typical
$15,000$35,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
House with a steep dark grey pitched roof and a dormer window

Slate Roof Installation cost at a glance

  • Typical range: $15,000 – $35,000
  • Most homeowners pay: around $22,000
  • Prices vary most by: Slate tiles, underlayment and flashing (40–55% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: Angi's slate roof guide, updated September 15, 2026 (average $13,348 across 255 verified projects, most $4,389–$22,377; $10–$30 per square foot installed; natural $15–$30, synthetic $10–$15; labor $75–$150 per hour or $5–$12 per square foot; 1,500-square-foot roof nationally $15,000–$30,000), HomeGuide's synthetic slate and roof replacement guides (natural $10–$30 per square foot installed, synthetic $9–$12; average natural home $22,000–$70,000, synthetic $12,500–$26,000; natural material $600–$1,600 per square; heavier-material removal $2–$5 per square foot; premium labor up to $4–$17 per square foot; slate lifespan 50–200+ years) and HomeBuddy's slate guide ($10–$30 per square foot, most $15,000–$45,000+; natural $15–$30, synthetic $8–$15, soft slate $10–$20) — Angi's lower average is published as its smaller and synthetic project mix, not averaged away. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Slate Roof Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Synthetic or composite slate, standard roof$13,500 – $22,500The cheap end: HomeGuide prices synthetic slate at $9–$12 per square foot installed with an average of $12,500–$26,000, and Angi prices synthetic at $10–$15 — the slate look at a lower weight and price
Standard natural slate — the typical job$15,000 – $35,000The shared band itself: Angi prices a 1,500-square-foot roof nationally at $15,000–$30,000, and HomeGuide prices natural slate at $10–$30 per square foot installed — quarried stone on a standard roof
Premium natural slate, steep, complex or reinforced — the top end$35,000 – $70,000The expensive end: HomeGuide prices an average natural-slate home at up to $70,000, and premium grades run $20–$30 per square foot in its tables — larger roofs, steep pitches, complex valleys and framing reinforcement push a job here

Where the money goes

Part of the jobShareNote
Slate tiles, underlayment and flashing40–55% of totalThe material: HomeGuide prices natural slate material at $600–$1,600 per square, and Angi prices natural slate at $15–$30 per square foot installed against $10–$15 for synthetic — the stone grade is the price ladder
Specialized installation labor35–50% of totalThe fitting: Angi prices slate labor at $75–$150 per hour or $5–$12 per square foot for its specialist crews, and HomeGuide prices premium-material labor up to $4–$17 per square foot — every slate is placed by hand
Tear-off, disposal and structural work10–20% of totalThe rest: HomeGuide prices removing heavier materials like slate or tile at $2–$5 per square foot, and a roof framed for light shingles may need reinforcement to carry slate — that framing check and work sit here
Slate tiles, underlayment and flashing · 40–55%Specialized installation labor · 35–50%Tear-off, disposal and structural work · 10–20%
Estimator’s note: on a slate roof installation, slate tiles, underlayment and flashing is usually where quotes swing most (40–55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A brick house under a dark grey pitched roof: natural slate runs $10–$30 per square foot installed in HomeGuide, against $9–$12 for synthetic — the material grade is the price ladder, and the photo shows the roof planes that grade covers
A brick house under a dark grey pitched roof: natural slate runs $10–$30 per square foot installed in HomeGuide, against $9–$12 for synthetic — the material grade is the price ladder, and the photo shows the roof planes that grade covers

What moves the price most

Slate type is the first driver: Angi prices natural slate at $15–$30 per square foot installed against $10–$15 for synthetic, and HomeGuide prices synthetic at $9–$12 against $10–$30 for natural — the same roof in synthetic costs roughly half what it costs in natural stone. Roof size is second: the price is per-square-foot maths, so Angi's national band for a 1,500-square-foot roof at $15,000–$30,000 roughly doubles for a 3,000-square-foot roof at $30,000–$60,000. Weight is third: slate is heavy, and HomeGuide notes a natural slate roof may require additional structural support — a reinforcement job is priced on top of the tile rate, not inside it. Finally, specialist labor is why slate costs more than shingles at any size: Angi prices slate crews at $75–$150 per hour because the material demands a contractor who specializes in it.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A large dark roof plane with a dormer: steep, complex roofs sit in this page's top tier at $35,000–$70,000 — pitch and complexity, not just size, move a slate job up the band
A large dark roof plane with a dormer: steep, complex roofs sit in this page's top tier at $35,000–$70,000 — pitch and complexity, not just size, move a slate job up the band

Frequently asked questions

How much does a slate roof cost per square foot?

About $10–$30 per square foot installed, in both Angi and HomeGuide. Synthetic slate sits at the bottom of that range — $10–$15 in Angi, $9–$12 in HomeGuide — and natural slate spans it, at $15–$30 in Angi and $10–$30 in HomeGuide.

Natural or synthetic slate — which should I choose?

Natural is the premium stone: Angi prices it at $15–$30 per square foot installed, and HomeGuide notes it can last 50–200+ years but may need structural reinforcement for its weight. Synthetic is the budget route at $10–$15 in Angi and $9–$12 in HomeGuide — lighter, easier to install, and shorter-lived than stone.

Can a slate roof go on any house?

Not without a check: HomeGuide notes a natural slate roof may require additional structural support because of its weight. A roof framed for light shingles may need reinforcement to carry slate, and that framing work is priced outside the per-square-foot tile rate — get the structure confirmed before the slate is ordered.

Does the price include tearing off the old roof?

Tear-off is inside this page's breakdown, not free: HomeGuide prices removing heavier materials like slate or tile at $2–$5 per square foot, on top of disposal. A quote that keeps the old roof in place and lays slate over it is a different scope — and for slate, the underlayment underneath is replaced as part of a proper job.

Why is Angi's average ($13,348) below this page's typical band?

Because its project mix is different: Angi's average covers 255 verified projects including synthetic slate and smaller roofs, with most at $4,389–$22,377. This page's typical band is a standard 1,500-square-foot roof, which Angi itself prices nationally at $15,000–$30,000 — the two figures describe different scopes, and both are published here rather than averaged away.

How long does a slate roof last?

HomeGuide's material table puts slate at 50–200+ years — the longest life of any common roofing material on this site. That lifespan is part of the price: a slate roof costs several times a shingle roof up front and is rarely replaced in the owner's lifetime.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Slate Roof Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Cedar-shingled house with a curved balcony

Cedar Shake Roof Cost

$15,800 – $30,000

Cedar shake roof installation typically costs $15,800 – $30,000 for a standard roof, with about $21,000 the figure most jobs land near — Angi averages $21,000 with most at $15,800–$30,000 at $6–$15 per square foot installed, HomeGuide puts a real wood shake roof at $25–$30 per square foot installed with an average project of $12,900–$28,200, and HomeBuddy ranges a cedar shake roof at $16,000–$64,000 depending on size and grade. The shakes, underlayment, flashing, labor, tear-off and treatment below are all inside the total, while the ongoing maintenance — inspections, cleaning and re-sealing — is ongoing cost, published separately so it is not mistaken for part of the install price.

Two-story house with gray lap siding and two garage doors at dusk

Siding Replacement Cost

$5,500 – $17,500

Typical full-house replacement in a standard material, installed — about $4 – $13 per sq ft installed

Suburban home with light lap siding, front porch and lawn

Vinyl Siding Installation Cost

$6,400 – $18,400

Vinyl siding installation typically costs $6,400 – $18,400 for a full house in standard vinyl, with about $12,300 the figure most jobs land near — Angi averages $12,303 with most at $6,368–$18,377 at $3–$12 per square foot installed across 5,282 verified projects, HomeGuide prices vinyl at $4–$12 per square foot installed or $10,000–$30,000 for a 2,500-square-foot house, and This Old House prices vinyl at $3–$12 per square foot with an average vinyl project on a 2,000-square-foot home at $12,252. The panels, trim, house wrap and labor below are all inside the total for a full-house job, while removing old siding and repairing sheathing underneath — Angi names removal and structural repairs as the main spread drivers — is priced on the condition found, not assumed away.

Modern house with dark panel cladding and a bay window

Fiber Cement Siding Installation Cost

$6,600 – $23,200

Fiber cement siding installation typically costs $6,600 – $23,200 for a full house in standard lap boards, with about $14,900 the figure most jobs land near — Angi averages $14,901 with most at $6,583–$23,219 at $7–$18 per square foot installed across 2,297 verified projects, HomeGuide prices fiber cement at $6–$15 per square foot installed or $15,000–$37,500 for a 2,500-square-foot house, and Fixr averages $15,000 with most at $8,000–$26,600 at $5–$14 per square foot. The boards, trim, house wrap, flashing and labor below are all inside the total for a standard lap job, while panel and shingle styles — Angi prices panels at $6–$18 and shingles at $5–$14 per square foot — and factory-finished color are tiered separately, not averaged into the lap band.

Modern house with warm wood cladding at sunset

Wood Siding Installation Cost

$8,500 – $18,700

Wood siding installation typically costs $8,500 – $18,700 for natural wood or cedar siding on a 2,000-square-foot home, with about $13,600 the figure most jobs land near — Angi averages $13,600 with most at $8,500–$18,700 at $5–$11 per square foot installed for cedar, HomeGuide prices cedar at $6–$16 per square foot installed or $15,000–$40,000 for a 2,500-square-foot house, and This Old House averages about $29,250 at roughly $11.70 per square foot. This Old House's higher average is published as its larger, all-in scope rather than averaged away — this page's typical band follows Angi's 2,000-square-foot-home band. The boards, trim, stain or seal, house wrap and labor below are all inside the total for a standard clapboard or shiplap job, while premium species and shake styles — Angi prices shakes at $7–$11 per square foot — and the recurring restaining are tiered and published separately.

Yellow house with horizontal lap siding and teal shutters

Aluminum Siding Installation Cost

$6,000 – $14,500

Aluminum siding installation typically costs $6,000 – $14,500 for a standard job on a 2,000-square-foot home, with about $11,750 the figure most jobs land near — Angi's aluminum siding guide, updated July 9, 2026, averages about $11,750 with an overall range of $4,500–$19,000 and prices corrugated aluminum at $3–$7 per square foot against $14–$18 for longboard, and its size table puts a 2,000-square-foot home at $6,000–$14,500; HomeGuide prices aluminum at $6–$10 per sq ft installed, or $15,000–$25,000 for a 2,500-square-foot house; and This Old House, using Homewyse data, prices aluminum at $7.32 per sq ft installed with a 2,000-square-foot home averaging $14,649. HomeGuide's and This Old House's higher totals are published as their larger-house, all-in scope rather than averaged away — this page's typical band follows Angi's 2,000-square-foot-home band. The panels, trim, house wrap and labor below are all inside the total for a standard corrugated or horizontal job, while longboard profiles — Angi prices them at $14–$18 per square foot — and old-siding removal are tiered and published separately.