Home › Cost Guides › Mold Remediation
Cost Guide

How Much Does a Mold Remediation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$1,500 – $3,750
Most homeowners pay around $2,800 · The typical project is a contained, room-scale remediation: the work area sealed off with containment, the affected drywall and material cut out, the space HEPA-vacuumed and dried, and testing on either side of the job. Small bathroom spots and whole-house jobs are tiered separately below; this band is the standard professional remediation most homeowners actually buy.
typical
$1,500$3,750
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
White brick wall with dark mold staining spreading along the mortar lines

Mold Remediation cost at a glance

  • Typical range: $1,500 – $3,750
  • Most homeowners pay: around $2,800
  • Prices vary most by: Remediation labour, containment & protective gear (50–65% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: the Angi mold remediation cost guide, HomeGuide's mold removal cost guide and Fixr's mold remediation cost data. Sources last checked: October 2026 — HomeGuide, Fixr, Angi. How we calculate these costs

Cost by scope

Mold Remediation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Small spot — one bathroom area or surface growth$500 – $1,500All three guides price the smallest jobs in the same band: Angi puts a bathroom at $500–$1,000, Fixr at $500–$1,500 and HomeGuide at $500–$2,000. Surface growth you can reach, contained, with no wall opened — once the wall has to come down, you are in the standard tier.
Standard room, attic or basement — the typical job$1,500 – $3,750Angi's $1,223–$3,757 band for most projects sits inside HomeGuide's $1,500–$6,000 and Fixr's $1,500–$9,000. A contained room-scale infestation — affected drywall cut out, the space HEPA-cleaned and dried, the moisture source fixed — with testing before and after.
Whole-house or severe — structural repairs included$10,000 – $30,000Angi and Fixr agree exactly on the whole-house band; HomeGuide prices flood-level whole-house damage at $15,000–$30,000. Multiple rooms, opened walls, ruined drywall, flooring and insulation, plus the leak or drainage work that caused it.

Where the money goes

Part of the jobShareNote
Remediation labour, containment & protective gear50–65% of totalFixr prices labour at roughly 60% of the total; HomeGuide prices crew time at $75–$120 an hour plus protective gear and professional equipment. Containment, negative air, removal and HEPA cleanup are all labour
Equipment, cleaning agents & sealants20–35% of totalAir scrubbers, dehumidifiers, HEPA vacuums, antimicrobial agents and post-remediation sealants — the kit HomeGuide names as the equipment line, priced on the materials side of Fixr's 60/40 split
Inspection & testing5–10% of totalBasic testing at $250–$350 in Angi ($450–$800 comprehensive); HomeGuide prices a full inspection at $300–$650, up to $1,000 for large homes; Fixr at $450–$800
Repairs & restoration10–20% of totalDrywall at $300–$825 a repair in Angi, carpet and flooring by the square foot in HomeGuide — the line that decides whether a quote is remediation-only or back-to-finished
Remediation labour, containment & protective gear · 50–65%Equipment, cleaning agents & sealants · 20–35%Inspection & testing · 5–10%Repairs & restoration · 10–20%
Estimator’s note: on a mold remediation, remediation labour, containment & protective gear is usually where quotes swing most (50–65% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
How most infestations are found — daylight across the wall shows the staining a quick glance misses; testing runs $250–$800 in the guides.
How most infestations are found — daylight across the wall shows the staining a quick glance misses; testing runs $250–$800 in the guides.

What moves the price most

Area decides the number first. All three guides price by the square foot — $10–$25 in Angi, $15–$30 in HomeGuide, $10–$30 in Fixr — so the measured size of the infestation sets the band before anything else. Location is the second lever: a bathroom at $500–$2,000 across the guides is one price, HVAC contamination at $3,000–$10,000 (Angi and Fixr agree) is another, and walls price to $20,000 in Angi when everything behind them has to go. Mold type moves the quote — black mold costs more everywhere because of the protective equipment and stricter containment, priced at $2,000–$10,000 in HomeGuide and $800–$7,000 in Fixr. And the moisture source is a separate, non-optional line: HomeGuide prices leak repair at $150–$850, and a remediation that does not price the source is a repeat infestation scheduled for later.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical mold remediation budget breaks down

Take the typical job — about 150 sq ft of contained growth in a basement corner: the area sealed off, the affected drywall cut out, the space HEPA-cleaned and dried, a leak fixed at the foundation wall, and testing before and after. Here is a realistic $2,800 version of that invoice, between Angi's $2,369 average and Fixr's $3,500: The budget below totals $2,800 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Labour, containment & protective gear$1,540
Equipment, agents & sealants$560
Inspection & testing$280
Leak repair & drywall patch$420
Total$2,800

What most people get wrong

  • Paying for remediation before the moisture source is priced. HomeGuide prices leak repair separately at $150–$850, and every guide treats it as its own scope. A remediation that does not fix the source is a repeat infestation scheduled for later.
  • Treating the per-square-foot number as the whole quote. Testing at $250–$800 and repairs sit outside the per-foot line; demand the written scope and check whether both are inside the number.
  • Assuming black mold is a flat surcharge. Type pricing is its own ladder — HomeGuide $2,000–$10,000, Fixr $800–$7,000 — so get the species identified by testing before signing a quote priced against the wrong ladder.
  • Tearing into a big colony without containment. Drywall removal without sealed containment spreads spores through the house; that sealed, negative-air workspace is what the labour share of the quote is buying.

Costs in your city

Mold prices follow crew rates and access together. HomeGuide prices crew time at $75–$120 an hour, so high-wage metros land at the top of the $1,500–$3,750 band while the same contained room prices lower where rates sit low. Basements, attics and crawlspaces price above reachable rooms everywhere, and humid-climate or flood-history areas see the bigger scopes — whole-wall and whole-house work that the top tier prices. Ask each contractor whether testing and the moisture-source fix are inside the number, and city quotes become comparable line by line.

How we got these numbers

Cross-checked against the Angi mold remediation cost guide — opened and read in full this run (average $2,369, most projects $1,223–$3,757, $10–$25 a sq ft, bathrooms $500–$1,000, HVAC $3,000–$10,000, whole house $10,000–$30,000), HomeGuide's mold removal cost guide — opened and read in full this run ($1,500–$6,000 average, $15–$30 a sq ft, crew $75–$120 an hour, black mold $2,000–$10,000, leak repair $150–$850) and Fixr's mold remediation cost data — opened and read in full this run ($1,500–$9,000, average $3,500, $10–$30 a sq ft, labour roughly 60% of total, whole house $10,000–$30,000). The typical band $1,500–$3,750 is the overlap of the three published ranges; the $2,800 most-pay figure sits between Angi's and Fixr's published averages. The per-square-foot bands genuinely disagree — Angi's $10–$25 against HomeGuide's $15–$30 — so this page publishes the full $10–$30 spectrum. Breakdown shares are derived from Fixr's 60/40 labour/materials split and are labelled as derived on the page.

Growth at arm's length — anything this widespread inside walls or HVAC needs professional containment, not a spray bottle.
Growth at arm's length — anything this widespread inside walls or HVAC needs professional containment, not a spray bottle.

Frequently asked questions

How much does mold remediation cost per square foot?

The three guides price the work at $10–$30 a square foot across their bands — Angi $10–$25, HomeGuide $15–$30, Fixr $10–$30. Fixr's area table makes it concrete: 100 sq ft at $1,000–$3,000, 200 sq ft at $2,000–$6,000, 500 sq ft at $5,000–$15,000. Testing and repairs sit outside the per-foot line, which is why the written scope matters more than the rate.

Does black mold cost more to remediate?

Yes. Angi names the protective equipment as the driver — black mold demands stricter containment and gear than ordinary growth. HomeGuide prices black mold remediation at $2,000–$10,000, Fixr at $800–$7,000. Get the species identified by testing before signing, so the quote is priced against the right ladder.

Is fixing the leak included in the remediation price?

No — it is a separate line. HomeGuide prices leak repair at $150–$850, and every guide treats the moisture source as its own scope. A quote that remediates without fixing the source is the classic route to a second infestation in the same spot; ask that both numbers appear in writing.

How much does mold testing cost?

Angi prices basic testing at $250–$350 and comprehensive inspection at $450–$800; HomeGuide prices a full inspection at $300–$650, up to $1,000 for a large home; Fixr at $450–$800. Testing belongs on both sides of the job — before, to scope it, and after, to prove the clearance.

Can I clean up small mold myself?

A small surface spot you can fully reach is fine to clean yourself. But anything inside walls, in the HVAC system, or bigger than a small patch needs professional containment — tearing into a large colony without sealed containment spreads spores through the house, which is exactly what the labour share of a professional quote is buying.

Before you sign: Area, access, moisture source — a fair mold quote names all three, and the $2,800 middle of the market is one contained room, cleaned, dried and tested.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Mold Remediation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Man with a headlamp examining a wall heavily covered in black mold

Mold Testing Cost

$300 – $700

Mold testing typically costs $300 – $700 for a standard home inspection with lab samples, with about $680 the figure most standard jobs land near — Angi's 2026 national average for a mold inspection is $689 inside its $303–$1,075 most-pay band, and iBuyer puts most homes at $300–$700 with an average near $670. This guide prices the inspection and the lab testing, not remediation — the removal job is priced separately.

Person in a yellow protective hazmat suit outdoors

Asbestos Removal Cost

$1,200 – $3,300

Asbestos removal typically costs $1,200 – $3,300 for a standard single-area interior job, with about $2,250 the figure most jobs land near — Angi's 2026 data averages $2,250 across 3,805 verified projects inside its $1,215–$3,285 band, and This Old House puts the typical range at $1,170–$3,120. The price is per-area, not per-house: interior work runs $5–$20 per square foot in both guides, while exterior siding and roofing run far higher and are tiered separately below.

Old wooden house gable with heavily peeling paint under a blue sky

Lead Paint Removal Cost

$1,500 – $5,500

Lead paint removal typically costs $1,500 – $5,500 for a standard certified abatement project, with about $3,499 the figure most jobs land near — Angi's national average is $3,499 inside its $1,478–$5,520 most-pay band. This guide covers pre-1978 homes, where lead paint is a regulated hazard: certified abatement only, never a dry scrape-and-sand job.

Unfinished basement with exposed joists, block walls and a sump column

Radon Mitigation Cost

$800 – $1,300

The typical project is an active sub-slab depressurization system: a suction point cut through the basement slab, sealed PVC pipe run to a fan in unconditioned space, the exhaust vented above the roofline with a manometer so you can see the system running, and a post-install test confirming the number came down. Testing and permits are budgeted separately.

Bright finished basement room with tiled floor, staircase and glass doors

Radon Testing Cost

$150 – $450

Professional radon testing typically costs $150 – $450 for a standard home, with about $350 the figure most standard tests land near — Angi averages $421 inside a $145–$714 most-pay band, and HomeGuide prices a professional test at $125–$400. This guide prices a professional test — device placement, lab analysis and a written report — not mitigation, which is priced on its own page, and not a DIY kit alone.

Inspector in a yellow hard hat and high-visibility vest kneeling at a house doorway with a clipboard

Home Energy Audit Cost

$200 – $600

A home energy audit typically costs $200 – $600 for a standard home, with about $440 the figure most standard audits land near — Angi's 2026 national average is $437 inside its $212–$698 most-pay band, and HomeGuide's national average is $400 inside its $200–$600 average range. This guide prices the audit and its written report, not the upgrades it recommends.