Home › Cost Guides › Radon Testing
Cost Guide

How Much Does Radon Testing Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$150 – $450
Most homeowners pay around $350 · Professional radon testing typically costs $150 – $450 for a standard home, with about $350 the figure most standard tests land near — Angi averages $421 inside a $145–$714 most-pay band, and HomeGuide prices a professional test at $125–$400. This guide prices a professional test — device placement, lab analysis and a written report — not mitigation, which is priced on its own page, and not a DIY kit alone.
typical
$150$450
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Bright finished basement room with tiled floor, staircase and glass doors

Radon Testing cost at a glance

  • Typical range: $150 – $450
  • Most homeowners pay: around $350
  • Prices vary most by: Technician labor, placement and pickup (50–65% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's radon testing cost guide, updated September 23, 2026 (national average $421 across 1,184 verified projects, most $145–$714; DIY kits $10–$40, digital monitors $100–$250, professional $150–$700; pro labor $30–$75 an hour where hourly; lab fees $10–$40 per mailed kit; one kit per 2,000 square feet as a placement rule of thumb), HomeGuide's radon testing cost guide (professional $125–$400, national average $250, minimum $75, maximum $700 for large multi-story homes; DIY $10–$50 including lab analysis; continuous monitors $150–$300; travel $0.50–$0.60 per mile outside the service area) and EngineerFix's radon-test-with-inspection guidance (a professional test bundled with a home inspection $150–$350; short-term minimum 48 hours; EPA action level 4.0 pCi/L). The page's typical band spans the HomeGuide band to Angi's average at $150–$450, and Angi's $421 average is published as reflecting larger and multi-device jobs, not averaged away. Sources last checked: October 2026 — HomeGuide, Angi, EPA. How we calculate these costs

Cost by scope

Radon Testing cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
DIY test kit, mail-in lab$10 – $50The cheap end: Angi prices short-term kits at $10–$30 and HomeGuide at $10–$50 including lab analysis — a first screen, not a transaction-grade result
Professional test, standard home — the typical job$150 – $450The shared band: Angi's $145–$714 most-pay band against HomeGuide's $125–$400 professional band and EngineerFix's $150–$350 bundled-with-inspection band — a certified pro, a placed device, lab analysis and a written report
Large or multi-level home, multiple devices or continuous monitor$350 – $700The expensive end: HomeGuide prices large multi-story homes up to $700 with multiple devices, and Angi's band runs to $714 — more devices, longer or continuous monitoring

Where the money goes

Part of the jobShareNote
Technician labor, placement and pickup50–65% of totalThe largest share: Angi prices pro labor at $30–$75 an hour where hourly, but most pros charge a flat fee covering setup, placement and pickup
Device and lab analysis20–35% of totalLab fees run $10–$40 per mailed kit in Angi's tables, and professional devices plus certified lab analysis are the cost inside the flat fee
Written report and interpretation10–20% of totalThe pCi/L result against the EPA's 4.0 pCi/L action level, with the mitigation recommendation if the reading is high
Travel and scheduling5–10% of totalHomeGuide notes some companies charge $0.50–$0.60 per mile outside their standard service area
Technician labor, placement and pickup · 50–65%Device and lab analysis · 20–35%Written report and interpretation · 10–20%Travel and scheduling · 5–10%
Estimator’s note: on radon testing, technician labor, placement and pickup is usually where quotes swing most (50–65% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
The utility side of the lowest level — furnaces, laundry and exposed structure share the space a test device samples, and the report reads in pCi/L against the EPA's 4.0 action level.
The utility side of the lowest level — furnaces, laundry and exposed structure share the space a test device samples, and the report reads in pCi/L against the EPA's 4.0 action level.

What moves the price most

Test type is first: a $10–$50 DIY kit screens, a $150–$450 professional test documents, and a $150–$300 continuous monitor (HomeGuide) watches over time — a sale needs the documented result, not the screen. Home size and levels are second: Angi's how-to places a device on the lowest lived-in level and uses one kit per 2,000 square feet as a rule of thumb, so multi-level homes need more devices and price higher. Placement rules are third: closed-house conditions during a short-term test, a minimum 48-hour window, and the device three feet off the ground in the lowest lived-in level — breaking the conditions invalidates the reading, not the fee. Purpose is fourth: EngineerFix prices a test bundled with a home inspection at $150–$350, which is the efficient route in a purchase, while a standalone test suits an owner checking their own home. If the reading is high, see our radon mitigation guide, and for the inspection it often rides with, see our home inspection guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical radon testing budget breaks down

Take the typical job — a standard 2,000 sq ft home, one professional short-term test: device placed on the lowest lived-in level, lab analysis, written report in pCi/L. Here is a realistic $350 version of that invoice: The budget below totals $350 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Technician labor, placement and pickup$200
Device and lab analysis$100
Written report and interpretation$35
Travel and scheduling$15
Total$350

What most people get wrong

  • Testing the wrong level — the device goes on the lowest lived-in level, three feet off the ground, not in the attic or a rarely used room, and a wrong-level result answers the wrong question.
  • Breaking closed-house conditions during a short-term test — open windows and fans invalidate the reading, and the retest costs a second fee.
  • Treating a DIY kit as a transaction result — a $10–$50 kit screens well, but a sale needs the documented professional result a buyer and lender can rely on.
  • Testing once and never again — the EPA recommends testing all homes regardless of zone, and a test after mitigation or a major renovation is how you confirm the fix worked.

Costs in your city

Radon testing is inspector-labor pricing around device and lab fees: the same standard test quotes near the bottom of the band where inspector rates are low and toward the top in a high-cost metro, while the lab analysis ships nationally. Zone maps do not set the price — device count and levels do — but high-radon regions test more often and bundle tests with inspections, which is the efficient route in a purchase. Certification travels too: HomeGuide names NRSB and NEHA certification, so ask each bidder for their certification and whether they also sell mitigation.

How this estimate was built: radon testing figures were cross-checked across Angi’s radon testing cost guide, HomeGuide’s radon testing cost guide and EngineerFix’s radon-test-with-inspection guidance. Angi publishes a $421 average inside a $145–$714 most-pay band with DIY kits at $10–$40 and professional tests at $150–$700, HomeGuide publishes a professional test at $125–$400 with a $250 average and a $700 maximum for large multi-story homes, and EngineerFix publishes a bundled-with-inspection test at $150–$350 — so the typical band spans the HomeGuide band to Angi’s average, and large multi-level work is tiered separately. Checked November 2026. Full method: How We Estimate Costs.
An empty lowest-level room — the test placement level. Closed-house conditions during a short-term test, at least 48 hours, are what make the reading valid.
An empty lowest-level room — the test placement level. Closed-house conditions during a short-term test, at least 48 hours, are what make the reading valid.

Frequently asked questions

How much does professional radon testing cost?

Angi averages $421 inside a $145–$714 most-pay band, and HomeGuide prices a professional test at $125–$400. This page's typical band is $150–$450, with about $350 the figure most standard tests land near.

How much does a DIY radon test kit cost?

Angi prices short-term kits at $10–$30 and HomeGuide at $10–$50 including lab analysis. Short-term kits run 2–7 days; long-term kits run 90 days to a year.

How long does a radon test take?

A short-term test needs a minimum 48 hours, typically 2–7 days; a long-term test runs 90 days or more; a continuous monitor needs at least 30 days per HomeGuide.

What reading means action is needed?

The EPA's action level is 4.0 pCi/L — at or above it, mitigation is recommended. Mitigation itself is a separate job, priced on its own page.

Is radon testing included in a home inspection?

Not automatically. EngineerFix prices a test bundled with a home inspection at $150–$350 as an add-on — confirm the scope before booking, or the test is a second visit.

Before you sign: get the device type and test duration in writing, confirm the tester is certified and does not sell mitigation on the same job, ask whether the lab fee is included, keep the report for any mitigation quote, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Radon Testing cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Inspector in a yellow hard hat and high-visibility vest kneeling at a house doorway with a clipboard

Home Energy Audit Cost

$200 – $600

A home energy audit typically costs $200 – $600 for a standard home, with about $440 the figure most standard audits land near — Angi's 2026 national average is $437 inside its $212–$698 most-pay band, and HomeGuide's national average is $400 inside its $200–$600 average range. This guide prices the audit and its written report, not the upgrades it recommends.

Woman holding a clipboard standing outside a house

Home Inspection Cost

$300 – $425

A home inspection typically costs $300 – $425 for a standard single-family home, with about $344 the figure most buyers land near — Angi's 2026 national average is $344 inside its $296–$425 most-pay band, and HomeGuide's national average is $340 inside its $200–$500 average range. This guide prices the standard visual inspection and written report — radon, mold, sewer scope and other specialist checks are add-ons, not part of the base fee.

HVAC technician with manifold gauges working on a rooftop condensing unit

Furnace Replacement Cost

$3,500 – $7,000

The typical project is a like-for-like gas furnace replacement in an average home: the old unit pulled and hauled away, a new 80,000–100,000 BTU gas furnace set, vented and connected to the existing ductwork, gas line and thermostat, permitted and commissioned. Electric, oil and fuel-switch jobs are tiered separately; this band is the standard replacement most homeowners actually buy.

Old rusty furnace door set in a weathered concrete wall

Whole-House Humidifier Installation Cost

$400 – $1,200

Whole-house humidifier installation typically costs $400 – $1,200 for a standard furnace-mounted unit professionally installed, with about $580 the figure most jobs land near — Angi's national average is $580 inside its $392–$768 most-pay band, and HomeGuide's average range is $400–$1,200. This guide covers ducted whole-house units, not portable room humidifiers; a furnace-mounted unit ties into ductwork, plumbing and power, which is why most homeowners hire it out.

HVAC technician working with manifold gauges

Whole-House Dehumidifier Installation Cost

$1,500 – $2,800

Whole-house dehumidifier installation typically costs $1,500 – $2,800 for a standard ducted unit tied into existing HVAC, with about $2,000 the figure most standard jobs land near — Angi's band is $1,300–$2,800 with a $1,500 average, and HomeGuide's is $1,500–$3,500 with a $2,200 average. This guide prices the ducted whole-house unit only; a portable unit needs no professional installation.

Wooden sauna interior with slatted walls and benches

Sauna Installation Cost

$2,500 – $10,000

Installed home sauna — HomeGuide's national average from 114 homeowner-reported projects is about $6,000