Home › Cost Guides › House Leveling
Cost Guide

How Much Does House Leveling Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$3,000 – $9,500
Most homeowners pay around $6,500 · Leveling a pier-and-beam house typically costs $3,000 – $9,500, with about $6,500 the most-pay figure — Modernize and EngineerFix agree on that band and average, and the work is hydraulic jacks, reshimming and pier, beam or joist repair under the floor, not a new foundation; a settled slab is priced by underpinning instead, and a full lift with foundation replacement runs far past this page.
typical
$3,000$9,500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Exposed wooden beams in a house under construction, showing the structural timber framing

House Leveling cost at a glance

  • Typical range: $3,000 – $9,500
  • Most homeowners pay: around $6,500
  • Prices vary most by: Piers, posts & underpinning hardware (30–40% of the budget)

Cross-checked against four published sources for this project. Sources used for this page: Modernize's Pier and Beam Foundation Repair Cost Guide (2026 Pricing) (published 2025-07-29, updated 2026-09-23: most homeowners pay $3,000–$9,500; minor $1,000–$3,500, moderate $3,000–$8,000, severe $8,000–$15,000+; reshimming $1,000–$3,500; replacing piers $2,500–$6,000 per pier; beam replacement $400–$1,200 per beam; floor joist replacement $350–$1,000 per joist; underpinning $1,000–$3,000 per pier, segmented around $1,000, steel push around $2,000, helical around $3,000; waterproofing $3,000–$20,000+; full house leveling $5,000–$12,000; repairs typically $1,500–$15,000; full foundation replacement $20,000–$40,000+; permits and inspections $100–$500; reshimming lasts 5–10 years, new piers and beams up to 25 years with maintenance), EngineerFix's How Much Does It Cost to Level a Pier and Beam House? (typical $3,000–$9,500, national average around $6,500; minor adjustments $1,000–$4,000; major structural work beyond $12,000, up to $25,000 for complex rebuilds; underpinning $1,000–$3,000 per pier; sill plate replacement $120–$200 per linear foot; structural engineer's report $500–$2,000; no update date shown on the page as fetched), Granite Foundation Repair's A Quick Guide to House Leveling (updated 2025-06-25: Dallas house leveling generally $3,500–$6,500; only one-half to two-thirds of a foundation's elevation loss can typically be recovered; expansive clay soil as the classic Dallas settling cause) and NC Foundation Fixes' House Leveling Cost in 2026 (updated 2026-09-21: inspection and elevation readings $150–$800; minor floor support adjustments $1,000–$4,000; crawl-space post or pier support repair $3,000–$12,000; beam, girder or joist repair $4,000–$20,000+; foundation settlement stabilization $9,000–$30,000+; whole-home leveling or major structural scope $20,000–$50,000+; smaller projects $3,000–$10,000, larger projects $15,000–$40,000+; leveling is not always the same as foundation repair). Synthesized typical = the identical $3,000–$9,500 band published by Modernize and EngineerFix, with $6,500 most-pay as EngineerFix's published national average. No Angi/HomeGuide/Fixr dedicated house-leveling guide exists; the 3-source bar is met with these four independent published sources. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Modernize, Fixr, Angi. How we calculate these costs

Cost by scope

House Leveling cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Reshimming & minor floor-support adjustment$1,000 – $3,500The cheap end: Modernize prices reshimming at $1,000–$3,500, EngineerFix prices minor shimming and re-leveling of isolated areas at $1,000–$4,000, and NC Foundation Fixes prices minor floor-support adjustments at $1,000–$4,000 — steel, composite or wood shims slipped between pier and beam to take up a small, localized sag, with no members replaced.
Pier-and-beam releveling — the typical job$3,000 – $9,500The typical project on this page. Modernize says most homeowners pay $3,000–$9,500 for pier-and-beam repairs and EngineerFix puts the typical band at the same $3,000–$9,500 with a national average around $6,500 — hydraulic jacks lift the low section, piers are adjusted or replaced, and beams or joists are repaired where they have sagged or rotted.
Full house leveling & settlement stabilization$9,000 – $30,000+The expensive end: NC Foundation Fixes prices foundation settlement stabilization at $9,000–$30,000+ and whole-home leveling at $20,000–$50,000+, EngineerFix prices major structural work beyond $12,000 and up to $25,000 for complex rebuilds, and Modernize prices full house leveling at $5,000–$12,000 inside its severe $8,000–$15,000+ band — underpinning to stable soil, beam and joist replacement, and an engineer's plan behind it.

Where the money goes

Part of the jobShareNote
Piers, posts & underpinning hardware30–40%The steel and concrete doing the holding: Modernize prices underpinning at $1,000–$3,000 per pier — segmented piers around $1,000, steel push piers around $2,000, helical piers around $3,000 — and pier replacement at $2,500–$6,000 per pier, while EngineerFix prices underpinning at the same $1,000–$3,000 per pier; the pier count, not the house's size, is the unit being bought
Beams, joists & sill plates15–25%The timber the floor stands on: Modernize prices beam replacement at $400–$1,200 per beam and floor joist replacement at $350–$1,000 per joist, and EngineerFix prices a rotted sill plate at $120–$200 per linear foot — moisture, rot or termite damage in any of these turns a leveling job into structural carpentry
Labor, hydraulic jacking & equipment25–35%Editorial estimate derived from the published method descriptions: the lift itself is a crew with hydraulic jacks working slowly to avoid cracking finishes, and both Modernize and EngineerFix note that cramped crawl-space access raises the labor time — the one line that grows fastest on a low-clearance house
Inspection, engineering & permits5–10%NC Foundation Fixes prices inspection and elevation readings at $150–$800, Modernize prices permits and inspections at $100–$500, and EngineerFix prices a structural engineer's report at $500–$2,000 — small lines that decide whether the large lines are the right ones
Moisture control & finish repairs5–10%The cause and the consequences: Modernize prices crawl-space waterproofing at $3,000–$20,000+ where moisture caused the damage, and NC Foundation Fixes warns that lifting can change drywall cracks, trim gaps, door swings, tile, cabinets and plumbing — finish repairs the quote should name as included or excluded
Piers, posts & underpinning hardware · 30–40%Beams, joists & sill plates · 15–25%Labor, hydraulic jacking & equipment · 25–35%Inspection, engineering & permits · 5–10%Moisture control & finish repairs · 5–10%
Estimator’s note: on house leveling, piers, posts & underpinning hardware is usually where quotes swing most (30–40% of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Concrete piers carrying a building from below: Modernize and EngineerFix both price underpinning at $1,000–$3,000 per pier, and the pier count is the unit the job is bought in — six piers at $2,000 each is $12,000 of underpinning before any beam or finish work. These are coastal concrete piers shown as an example of pier supports, not a leveling job in progress
Concrete piers carrying a building from below: Modernize and EngineerFix both price underpinning at $1,000–$3,000 per pier, and the pier count is the unit the job is bought in — six piers at $2,000 each is $12,000 of underpinning before any beam or finish work. These are coastal concrete piers shown as an example of pier supports, not a leveling job in progress

What moves the price most

How far the house has dropped is the first driver: EngineerFix puts minor shimming work at $1,000–$4,000 and major structural work beyond $12,000, up to $25,000, so the measured drop, not the floor's appearance, sets the band. Foundation type is second: Modernize prices pier-and-beam work by the repair — reshimming $1,000–$3,500, full house leveling $5,000–$12,000 — while a settled slab is an underpinning job at $1,000–$3,000 per pier, which is why the same sloping floor prices differently on different foundations. Pier count is third: every pier that must be replaced or underpinned adds $1,000–$3,000 in both Modernize and EngineerFix, and Modernize's own example — six failing piers at $2,000 each — is $12,000 for underpinning alone. The timber underneath is fourth: Modernize prices a beam at $400–$1,200 and a joist at $350–$1,000, EngineerFix prices a rotted sill plate at $120–$200 per linear foot, and rot or termite damage found once the floor is open turns a leveling job into structural carpentry. Access and soil close the bill: Modernize and EngineerFix both charge more for cramped crawl spaces, EngineerFix and Granite Foundation Repair both name expansive clay as the classic settling engine, and NC Foundation Fixes warns that moisture and drainage must be fixed first or the new supports sit in the same wet soil that rotted the old ones. Worked example at the most-pay figure: reshimming and pier adjustment $2,000 + beam and joist repair (2 beams at $600, 2 joists at $375) $1,950 + labor, hydraulic jacking and equipment $1,950 + inspection, elevation readings and permits $600 = $6,500. For the foundation itself, see our foundation repair guide; for sunken concrete slabs, see our concrete leveling guide; for damp crawl spaces, see our crawl space encapsulation guide; and for the floor above the repair, see our subfloor replacement guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
The measurement that starts every leveling job: NC Foundation Fixes prices inspection and elevation readings at $150–$800, and a quote that promises perfectly level floors before anyone has measured the drop should be questioned — Granite Foundation Repair notes only one-half to two-thirds of elevation loss can typically be recovered
The measurement that starts every leveling job: NC Foundation Fixes prices inspection and elevation readings at $150–$800, and a quote that promises perfectly level floors before anyone has measured the drop should be questioned — Granite Foundation Repair notes only one-half to two-thirds of elevation loss can typically be recovered

Frequently asked questions

How much does it cost to level a house?

Most homeowners pay $3,000–$9,500, with about $6,500 the most-pay figure. Modernize says most homeowners pay $3,000–$9,500 for pier-and-beam repairs, EngineerFix puts the typical band at the same $3,000–$9,500 with a national average around $6,500, and NC Foundation Fixes places smaller floor-support projects at $3,000–$10,000 — three sources landing in the same place. (Modernize; EngineerFix; NC Foundation Fixes)

How much does it cost to level a pier and beam house?

The same $3,000–$9,500 band, averaging about $6,500. EngineerFix prices minor shimming at $1,000–$4,000, Modernize prices reshimming at $1,000–$3,500, and NC Foundation Fixes prices minor floor-support adjustments at $1,000–$4,000 — a localized sag is a shim job, while a whole floor on failing piers is the full band. (EngineerFix; Modernize; NC Foundation Fixes)

Is house leveling the same as foundation repair?

Not always. NC Foundation Fixes explains that leveling can mean crawl-space supports, beams, posts, piers, joists, floor lift, slab lifting or settlement repair, and the right price category depends on why the floor moved — a sagging beam over a crawl space is a different job from a settled perimeter foundation, even though both can show up as a sloping floor. (NC Foundation Fixes)

Can a house be leveled back to perfectly flat?

Usually not. Granite Foundation Repair says only one-half to two-thirds of a foundation's elevation loss can typically be recovered, and NC Foundation Fixes says stabilization is often the first goal — the safe amount of lift depends on the age of the movement, the framing, the finishes and whether the supports can be stabilized, so a quote that promises perfectly level floors before measuring should be questioned. (Granite Foundation Repair; NC Foundation Fixes)

How much does underpinning cost per pier?

$1,000–$3,000 per pier in both Modernize and EngineerFix — segmented piers around $1,000, steel push piers around $2,000 and helical piers around $3,000 in Modernize's breakdown. Six piers at $2,000 each is $12,000 for underpinning alone, before any beam, joist or finish work, which is why the pier count is the first number to get in writing. (Modernize; EngineerFix)

How long does a leveling repair last?

It depends on the method. Modernize puts reshimming at five to ten years and new piers and beams at up to 25 years with maintenance — shims are an adjustment that can settle again, while new supports on stable soil are the lasting fix, provided the moisture or drainage problem that caused the movement is fixed alongside them. (Modernize)

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

House Leveling cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

An abandoned empty inground pool in an Arizona backyard, its floor covered in dirt and debris, with overgrown plants and a clear blue sky

Pool Removal Cost

$5,000 – $8,000

Removing an inground swimming pool — a partial fill-in or a full demolition and haul-away, with fill dirt, permits and regrading, at about $13.50 per square foot

Yellow excavator digging in open soil at a construction site

Septic Tank Replacement Cost

$3,000 – $7,000

Replacing just the septic tank — a new 1,000-gallon concrete tank set in the existing hole while the drain field stays in service — typically costs $3,000–$7,000, with most homeowners landing at $6,000 for the common 1,000-gallon concrete job.

Orange excavator tearing down a brick house, rooms exposed

House Demolition Cost

$6,000 – $25,000

Tearing down a whole single-family house — permits, utility cut-and-cap, excavator demolition, debris hauling and site grading — typically costs $6,000–$25,000, averaging $15,800 for a 2,000-square-foot home in Angi's 2026 data.

Wood-frame structure going up on a building site

Detached Garage Construction Cost

$25,000 – $33,600

Building a standard 2-car detached garage — about 400–480 sq ft, stick-built on a concrete slab with asphalt shingles, vinyl siding and two standard doors — typically costs $25,000–$33,600, with most homeowners paying around $26,400, about $50–$70 per sq ft. The wider published spread is $18,000–$57,600.

Three metal-clad barns with metal roofs in a green field

Pole Barn Construction Cost

$15,000 – $50,000

Building a pole barn — typically a 30×40 ft (1,200 sq ft) enclosed shell with a concrete floor, posts, trusses and a metal roof and siding — typically costs $15,000–$50,000, with most homeowners paying around $27,500, about $15–$40 per sq ft for a basic installed shell.

Outdoor patio with brick columns and a herringbone brick floor under a pergola

Brick Patio Installation Cost

$2,400 – $4,000

Installing a clay brick paver patio — typically about 200 sq ft, machine-made clay pavers in a simple pattern on a compacted gravel base with polymeric sand joints and solid edging — typically costs $2,400–$4,000, with most homeowners paying around $3,200, about $12–$20 per sq ft installed.