Home › Cost Guides › Subfloor Replacement
Cost Guide

How Much Does a Subfloor Replacement Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$900 – $3,000
Most homeowners pay around $1,560 · Subfloor replacement typically costs $900 – $3,000 for one standard room of about 300 square feet, panels only, with about $1,560 the figure most jobs land near — Angi averages $1,560 for a 300-square-foot room with most at $900–$3,000, while Modernize puts most projects at $1,500–$5,000 and HomeGuide prices installed panels at $2.20–$4.75 per square foot. The finished flooring above the subfloor is a separate cost — Modernize prices new flooring at $1–$50 per square foot on top — while the panels, labor, removal and fasteners below are all inside the total.
typical
$900$3,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Room stripped back to its plywood subfloor deck during a rebuild

Subfloor Replacement cost at a glance

  • Typical range: $900 – $3,000
  • Most homeowners pay: around $1,560
  • Prices vary most by: Installation labor (40–55% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's subfloor replacement guide, updated October 1, 2026 (most $900–$3,000 for a 300-square-foot room, average $1,560; $3–$10 per square foot overall; plywood material $2.50–$3.50, OSB $2.50–$4.50, moisture-resistant products up to $9 per square foot; labor $25–$30 per hour; mold remediation around $2,000 extra), HomeGuide's subfloor guide ($2.20–$4.75 per square foot installed overall; plywood $2.50–$3.00, OSB $2.20–$2.80, panel systems $2.75–$4.75 per square foot installed — published as the lower per-square-foot disagreement against Angi, not averaged away) and Modernize's subfloor replacement guide, updated August 12, 2026 (most projects $1,500–$5,000; plywood material $1.50–$3, OSB $1–$2, moisture-resistant and high-performance panels $3–$5 per square foot; labor $25–$40 per hour, 10–20 hours per project, typically the largest line item; new flooring $1–$50 per square foot is a separate cost). Sources last checked: October 2026 — HomeGuide, Modernize, Angi. How we calculate these costs

Cost by scope

Subfloor Replacement cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
OSB panels, one standard room$900 – $2,000The cheap end: Modernize prices OSB material at $1–$2 per square foot, and Angi's room band starts at $900 — the budget panel on a straightforward room
Standard plywood panels, one room — the typical job$1,200 – $3,000The shared band itself: Angi averages $1,560 for a 300-square-foot room with most at $900–$3,000, and Modernize prices plywood material at $1.50–$3 per square foot — the usual panel on a usual room
Moisture-resistant panels, larger area or joist work — the top end$3,000 – $5,000+The expensive end: Modernize puts most projects at up to $5,000, prices moisture-resistant and high-performance panels at $3–$5 per square foot in materials, and Angi prices moisture-resistant products up to $9 per square foot — bigger areas, damp-prone rooms and joist repairs push a job here, and mold remediation adds around $2,000 in Angi

Where the money goes

Part of the jobShareNote
Subfloor panels30–45% of totalThe material: Modernize prices OSB at $1–$2, plywood at $1.50–$3 and moisture-resistant panels at $3–$5 per square foot in materials, while Angi prices plywood at $2.50–$3.50, OSB at $2.50–$4.50 and moisture-resistant products up to $9 — the panel choice is the price ladder
Installation labor40–55% of totalThe fitting: Modernize prices labor at $25–$40 per hour over 10–20 hours per project and calls labor typically the largest line item, and Angi prices labor at $25–$30 per hour — pulling the old deck, levelling and fastening the new panels is the slow part
Removal, disposal, fasteners and adhesive10–20% of totalThe rest: pulling and disposing of the damaged deck, screws or ring-shank nails, construction adhesive and any levelling compound sit here — a squeak-free deck is glued as well as screwed
Subfloor panels · 30–45%Installation labor · 40–55%Removal, disposal, fasteners and adhesive · 10–20%
Estimator’s note: on a subfloor replacement, installation labor is usually where quotes swing most (40–55% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A panel being cut to fit: panels are 30–45% of the total on this page — Modernize prices plywood material at $1.50–$3 per square foot
A panel being cut to fit: panels are 30–45% of the total on this page — Modernize prices plywood material at $1.50–$3 per square foot

What moves the price most

Panel material is the first driver: Modernize prices OSB at $1–$2 per square foot in materials, plywood at $1.50–$3 and moisture-resistant panels at $3–$5, while Angi prices moisture-resistant products up to $9 — a damp-prone bathroom or laundry floor costs more per panel than a dry bedroom. Room size is second: the price is per-square-foot maths on a roughly 300-square-foot room, so a whole floor costs several times a single room. What is underneath is third: damaged joists, rot and mold turn a panel swap into a repair job — Angi puts mold remediation around $2,000 extra — and that work is priced outside the panel rate. Finally, the finished floor is not in this price: Modernize prices new flooring at $1–$50 per square foot on top, so a quote that includes the hardwood or tile above the subfloor is a different, larger job.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
An OSB panel surface: the budget panel on this page — Modernize prices OSB material at $1–$2 per square foot against $1.50–$3 for plywood
An OSB panel surface: the budget panel on this page — Modernize prices OSB material at $1–$2 per square foot against $1.50–$3 for plywood

Frequently asked questions

How much does subfloor replacement cost per square foot?

Angi prices it at $3–$10 per square foot overall, and HomeGuide prices installed panels lower, at $2.20–$4.75 per square foot — the disagreement is published, not averaged away. For a whole room, Angi's band is the clearer guide: most 300-square-foot rooms at $900–$3,000, averaging $1,560.

OSB or plywood subfloor — which should I choose?

OSB is the budget panel: Modernize prices OSB material at $1–$2 per square foot against $1.50–$3 for plywood, and Angi prices OSB at $2.50–$4.50 against $2.50–$3.50 for plywood. Plywood is the usual mid-range choice, and moisture-resistant panels — $3–$5 in materials in Modernize, up to $9 in Angi — are the pick for damp-prone rooms.

Does the price include new flooring on top?

No: this page prices the panels underneath only. Modernize prices new flooring at $1–$50 per square foot as a separate cost, so a quote that includes the finished hardwood, tile or carpet above the subfloor is a different, larger job — confirm which layer a quote covers before comparing.

What if there is mold or rotted joists underneath?

That is repair work on top of the panel price: Angi puts mold remediation around $2,000 extra, and joist repairs are priced by the extent of the damage. A soft, bouncy or musty floor should be opened up and checked before the new panels are priced, not after.

How long does a subfloor replacement take?

Modernize prices labor at $25–$40 per hour over 10–20 hours per project, so a single standard room is typically a one- to two-day job for a crew — larger areas, joist repairs and drying time after water damage stretch it further.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Subfloor Replacement cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Empty sunlit room with a continuous wood-look floor and French doors

Sheet Vinyl Flooring Cost

$1,000 – $2,500

Typical cost for about 500 sq ft, professionally installed — standard sheet runs about $2 – $5 per sq ft installed across the published guides

Bathroom with a large-format stone-look tile floor, a built-in tub and a glass-enclosed shower

Slate Flooring Cost

$2,500 – $4,000

Typical cost for about 250 sq ft, installed — standard slate tile runs about $10 – $16 per sq ft installed across the published guides

Industrial facility with a glossy epoxy-coated concrete floor

Garage Floor Coating Cost

$1,500 – $6,000

A pro epoxy coating on a standard 2-car garage — about $3–$12 per square foot installed

Living room with dark hardwood floors, a gray sofa and a staircase

Hardwood Floor Repair Cost

$500 – $1,500

A hardwood floor repair typically costs $500 – $1,500, with about $1,000 the most-pay figure — HomeGuide's average range is $500–$1,500 with a $930 national average, Modernize publishes the same $500–$1,500 band for a typical single-area repair, and Angi's average is $1,079 with most homeowners paying $482–$1,708. The $1,000 most-pay figure sits between the two published averages; small cosmetic fixes land below the band and water or structural damage lands well above it.

Living room with a glossy light stone-look tile floor, sofa and dining table

Tile Floor Repair Cost

$200 – $700

A tile floor repair typically costs $200 – $700, with about $400 the most-pay figure — HomeGuide prices floor tile repairs at $50–$700 on average, Angi prices tile in its floor repair guide at $300–$675, and Fixr prices a handyman tile-and-grout repair at $200–$400. The $400 most-pay figure is the top of Fixr's band and sits inside both Angi's and HomeGuide's bands; a single chipped tile lands below it and water damage or a full shower retiling lands far above it.

Bedroom with a dark wood sleigh bed, bay window and light gray wall-to-wall carpet

Carpet Repair Cost

$150 – $300

A carpet repair typically costs $150 – $300, with about $225 the most-pay figure — HomeGuide puts carpet repair at $150–$300 with most people spending about $225, Fixr puts it at $150–$300 with a $200 national average, and Angi puts it at $140–$400 with a $250 average. The $225 most-pay figure is HomeGuide's average, sitting between Fixr's $200 and Angi's $250; a single stain or burn lands below it and water or pet damage lands far above it.