Crawl Space Encapsulation cost at a glance
- Typical range: $5,000 – $15,000
- Most homeowners pay: around $5,500 (Angi, This Old House)
- Prices vary most by: Labor (50–70% of the budget)
Cross-checked against three published sources for this project. Sources used for this page: the Angi crawl space encapsulation cost guide (updated July 2026), This Old House’s crawl space encapsulation cost guide (updated March 2026) and Modernize’s 2026 crawl space encapsulation guide (updated September 2026). Sources last checked: October 2026 — This Old House, Modernize, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Encapsulation-only — liner + sealed vents | $2 – $7/sq ft | Angi $2–$4 vs This Old House $3–$7 — the two sources disagree on the floor; $3–$4 is the consensus core; Angi: ‘if you don’t need anything fancy’ you can get by near the bottom |
| Full system — liner, vents, insulation, dehumidifier | $5,000 – $15,000 | The headline band all three sources publish; a 1,000 sq ft crawl space runs roughly $3,000–$7,000 (This Old House); 2,000 sq ft $4,000–$20,000 (Angi) |
| Encapsulation + repairs / waterproofing | $10,000 – $15,000+ | Waterproofing add-on $1,500–$7,000 (Angi); mold remediation $500–$4,000; drainage systems $600–$1,800 (This Old House); jobs with drainage, mold or structural work push past $15,000 |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Labor | 50–70% of total | $3,000–$4,200 typical (Angi); This Old House: $2,250–$10,500 for a 1,500 sq ft home — prep repairs (mold, water, structural) push it higher |
| Vapor barrier (20-mil) | $0.40 – $0.70/sq ft | Angi $0.50–$0.70 vs This Old House $0.40–$0.60 — both write ‘millimeter’ but mean mil; Richard Trethewey: use at least 6-mil |
| Insulation | $0.50 – $3.50/sq ft | Angi spray foam $0.50–$1.50; This Old House: fiberglass batt $0.60–$1.10 (not recommended in humidity), spray foam $1.00–$3.50, rigid foam board $2.50–$3.00 |
| Dehumidifier | $800 – $2,000 installed | This Old House unit + wiring — Angi’s materials table lists $800–$1,200 unit-level, which understates what a homeowner pays installed |
| Sump pump / drainage | $60 – $1,800 | Angi: pedestal pump $60–$170, submersible $100–$400; This Old House: drainage system $600–$1,800 installed |
| Vent sealing + access door | $40 – $150 | Angi: $40–$50 per vent pro-installed and sealed; This Old House: $10–$22 per vent plus $60–$150 for an access door |

What moves the price most
Space size is the first driver — Angi’s cost-by-size runs $2,000–$10,000 for 1,000 sq ft to $6,000–$30,000 for 3,000 sq ft. Condition is the second: a clean, dry space gets liner-and-vents pricing while mold ($500–$4,000), standing water, pests ($500–$10,000) or structural damage ($1,500–$16,000) turn it into a repair job first. Vapor barrier thickness (6 → 12 → 20 mil) moves material cost. Insulation type matters — spray or rigid foam beats fiberglass in humid spaces (Trethewey). Dehumidifier, sump pump and drainage add lines only when the space needs them. Vent sealing and access doors are standard line items. Labor (50–70%) and permits ($50–$250) round it out. Savings levers (Angi): thinner liner, a cheaper dehumidifier, pedestal over submersible pump, DIY the prep/cleanup, and bundling with foundation or drainage work.
Costs in your city
Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

Frequently asked questions
How much does crawl space encapsulation cost?
Typical professional jobs run $5,000–$15,000 and average about $5,500 — Angi and This Old House (both 2026) publish the same average; Modernize (September 2026) agrees with the band.
What does crawl space encapsulation cost per square foot?
Basic encapsulation runs $2–$4/sq ft (Angi) to $3–$7/sq ft (This Old House) — the two sources disagree on the floor; $3–$4 is the consensus core. Extensive moisture-problem jobs reach $10/sq ft.
How much of the cost is labor?
50–70% of the total (Angi, This Old House) — $3,000–$4,200 typical (Angi); This Old House: $2,250–$10,500 for a 1,500 sq ft home. Prep repairs push labor higher.
What’s included in encapsulation?
The sealed package is a 6–20-mil vapor barrier, sealed vents and gaps, and dehumidification — plus optional wall/floor insulation (Modernize). Repairs (mold, drainage, structural) come before sealing.
How much does a crawl space dehumidifier cost?
$800–$2,000 installed (This Old House). Angi’s materials table lists $800–$1,200 unit-level — the installed figure is the honest one.
How long does encapsulation last?
15–20+ years with maintenance (Modernize), and many homeowners see 15–20% annual heating/cooling savings. Ongoing costs: drainage repair $500–$800 every 5–10 years, pest control $300–$550/yr, mold/inspection checks $150–$300 (Angi).






