Home › Cost Guides › Pool Removal
Cost Guide

How Much Does a Pool Removal Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$5,000 – $8,000
Most homeowners pay around $6,000 · Removing an inground swimming pool — a partial fill-in or a full demolition and haul-away, with fill dirt, permits and regrading, at about $13.50 per square foot
typical
$5,000$8,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
An abandoned empty inground pool in an Arizona backyard, its floor covered in dirt and debris, with overgrown plants and a clear blue sky

Pool Removal cost at a glance

  • Typical range: $5,000 – $8,000
  • Most homeowners pay: around $6,000
  • Prices vary most by: Demolition & excavation — breaking the shell, machine time (30–40% of the budget)

Cross-checked against two published sources for this project. Sources used for this page: Angi's pool removal cost guide, updated October 12, 2026 (national average $6,000, most homeowners $5,000–$8,000; full removal $4,000–$16,000, partial fill-in $2,500–$10,000; above-ground $300–$800; about $13.50 per square foot; labor $1,000–$3,000; engineer $100–$200 per hour; permits about $200; fill dirt $8–$12 per cubic yard, gravel $5–$8; deck removal $2–$5 per square foot; fence removal $800–$2,000; disposal $150–$500; vinyl $3,000–$10,000, fiberglass $5,000–$15,000, concrete and gunite $3,000–$15,000), HomeGuide's pool closing cost guide (removal $300–$16,000 overall; above-ground $300–$800, up to $2,500 with a deck; inground full removal $4,000–$16,000, fill-in $2,000–$10,000) and Hometown Demolition Contractors' pool demolition and removal guide (inground average about $6,500, above-ground about $2,200; inground $3,500–$15,000 for a medium pool with easy access; above-ground $1,000–$3,000; permits free to several hundred dollars; partial fill-in typically 2–3 days), with Realtor.com's 2026 fill-in-pool guide (proper removal around $10,000–$15,000; partial demolition breaks the top shell 18–36 inches and perforates the base; fill placed in 8–12 inch compacted lifts). Synthesized typical = Angi's most-spend band at $5,000–$8,000, with $6,000 most-pay at Angi's published national average, corroborated by Hometown's $6,500 inground average. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs

Cost by scope

Pool Removal cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Above-ground pool removal — drain, dismantle and haul away$300 – $2,500Angi prices basic above-ground removal at $300–$800, and HomeGuide at $300–$800, rising to $2,500 when a deck is attached; Hometown Demolition Contractors prices above-ground removal at $1,000–$3,000 on average, as little as a few hundred dollars for a small pool with easy access.
Standard — partial fill-in of an inground pool$2,500 – $10,000The typical project on this page: Angi prices a partial fill-in at $2,500–$10,000 and HomeGuide at $2,000–$10,000 — the crew drains the pool, punches drainage holes in the floor, breaks down the top 18 to 36 inches of the shell, and backfills with rubble, fill dirt and topsoil in compacted layers.
Premium — full removal of an inground pool$4,000 – $16,000Angi and HomeGuide both price full removal at $4,000–$16,000, and Hometown Demolition Contractors at $3,500–$15,000 for a medium pool with easy access: the whole shell, deck and plumbing are broken up and hauled away, the hole is filled with engineered fill compacted in lifts, and the ground is left buildable.

Where the money goes

Part of the jobShareNote
Demolition & excavation — breaking the shell, machine time30–40% of totalEditorial estimate from Angi's published dollar lines: labor alone runs $1,000–$3,000, and concrete and gunite are the most machine-intensive shells to break, at $3,000–$15,000 by material
Fill dirt, gravel & topsoil20–30% of totalEditorial estimate from Angi's published dollar lines: fill dirt at $8–$12 per cubic yard and gravel at $5–$8, plus $150 or more for delivery, with the cavity filled in compacted lifts and topped with soil
Labor — crew, draining & backfill15–25% of totalEditorial estimate from Angi's published dollar lines: pool removal labor at $1,000–$3,000, with draining up to $175; Hometown Demolition Contractors notes a partial fill-in typically takes 2–3 days
Hauling & disposal5–10% of totalEditorial estimate from Angi's published dollar lines: disposal at $150–$500 depending on debris weight and haul-away trips
Permits, engineering & finish grading5–10% of totalEditorial estimate from Angi's published dollar lines: permits and inspections at about $200, a structural engineer at $100–$200 per hour where required, soil compaction at $250–$1,000 and sod at $1.50–$3.00 per square foot
Demolition & excavation — breaking the shell, machine time · 30–40%Fill dirt, gravel & topsoil · 20–30%Labor — crew, draining & backfill · 15–25%Hauling & disposal · 5–10%Permits, engineering & finish grading · 5–10%
Estimator’s note: on a pool removal, demolition & excavation — breaking the shell, machine time is usually where quotes swing most (30–40% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
An excavator breaking ground: Angi prices pool removal labor at $1,000–$3,000, and concrete and gunite shells are the most machine-intensive to break apart
An excavator breaking ground: Angi prices pool removal labor at $1,000–$3,000, and concrete and gunite shells are the most machine-intensive to break apart

What moves the price most

Method is the first lever: Angi prices a partial fill-in at $2,500–$10,000 against $4,000–$16,000 for a full removal, and HomeGuide agrees on both bands — a full removal roughly doubles the job because every piece of shell, deck and plumbing is broken up and hauled away instead of buried. Pool type and material are second: Angi prices above-ground removal at $300–$800 while inground work starts at $2,500, and by material vinyl runs $3,000–$10,000, fiberglass $5,000–$15,000 and concrete or gunite $3,000–$15,000, since harder shells need more machine time. Size is third: Angi prices removal at about $13.50 per square foot — a 16 by 32 pool averages $6,900 and a 20 by 40 averages $10,800 — so the footprint is the fastest way to sanity-check a quote. Access, deck and permits are fourth: Angi prices deck removal at $2–$5 per square foot, fence removal at $800–$2,000 and permits at about $200, and a yard heavy machinery cannot reach costs more on every line. Worked example at the most-pay figure: demolition & excavation $2,100 + fill dirt, gravel & topsoil $1,500 + labor $1,350 + hauling & disposal $450 + permits, engineering & finish $600 = $6,000. To keep the pool instead, see our pool remodel guide, for the finish alone see our pool resurfacing guide, for the deck that usually comes out with it see our pool deck guide, and for re-laying the lawn afterwards see our sod installation guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A reclaimed backyard with a patio and fresh lawn: Angi prices sod at $1.50–$3.00 per square foot and seeding at $0.10–$0.20 — the finish line after a pool is filled in
A reclaimed backyard with a patio and fresh lawn: Angi prices sod at $1.50–$3.00 per square foot and seeding at $0.10–$0.20 — the finish line after a pool is filled in

Frequently asked questions

How much does it cost to remove a pool?

Typically $5,000–$8,000, averaging $6,000 in Angi's 2026 data; Hometown Demolition Contractors averages $6,500 for an inground pool and $2,200 for an above-ground pool. (Angi; Hometown Demolition Contractors)

How much does it cost to fill in a pool versus remove it completely?

A partial fill-in runs $2,500–$10,000 in Angi's data and $2,000–$10,000 in HomeGuide's, while a full removal runs $4,000–$16,000 in both guides — the full job costs more because the whole shell is hauled away instead of buried. (Angi; HomeGuide)

How much does it cost to remove an above-ground pool?

$300–$800 in Angi's and HomeGuide's data, rising to $2,500 when a deck is attached; Hometown Demolition Contractors prices above-ground removal at $1,000–$3,000 on average. (Angi; HomeGuide)

Do I need a permit to remove a pool?

In most places, yes — Angi prices permits and inspections at about $200, and Hometown Demolition Contractors puts them from free to several hundred dollars depending on the municipality; Angi also notes partial fill-ins are illegal in some regions, so check with the local building department first. (Angi; Hometown Demolition Contractors)

Should I remove my pool or remodel it?

Removal typically runs $5,000–$8,000 against $5,000–$15,000 for a remodel, averaging $10,500; Realtor.com's pool expert puts proper removal at $10,000–$15,000 and notes a well-kept pool can add $15,000–$25,000-plus to home value in a warm-weather market, so the choice turns on whether anyone still swims in it. See our pool remodel guide for the keep-it version. (Angi; Realtor.com)

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Pool Removal cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Yellow excavator digging in open soil at a construction site

Septic Tank Replacement Cost

$3,000 – $7,000

Replacing just the septic tank — a new 1,000-gallon concrete tank set in the existing hole while the drain field stays in service — typically costs $3,000–$7,000, with most homeowners landing at $6,000 for the common 1,000-gallon concrete job.

Orange excavator tearing down a brick house, rooms exposed

House Demolition Cost

$6,000 – $25,000

Tearing down a whole single-family house — permits, utility cut-and-cap, excavator demolition, debris hauling and site grading — typically costs $6,000–$25,000, averaging $15,800 for a 2,000-square-foot home in Angi's 2026 data.

Wood-frame structure going up on a building site

Detached Garage Construction Cost

$25,000 – $33,600

Building a standard 2-car detached garage — about 400–480 sq ft, stick-built on a concrete slab with asphalt shingles, vinyl siding and two standard doors — typically costs $25,000–$33,600, with most homeowners paying around $26,400, about $50–$70 per sq ft. The wider published spread is $18,000–$57,600.

Three metal-clad barns with metal roofs in a green field

Pole Barn Construction Cost

$15,000 – $50,000

Building a pole barn — typically a 30×40 ft (1,200 sq ft) enclosed shell with a concrete floor, posts, trusses and a metal roof and siding — typically costs $15,000–$50,000, with most homeowners paying around $27,500, about $15–$40 per sq ft for a basic installed shell.

Outdoor patio with brick columns and a herringbone brick floor under a pergola

Brick Patio Installation Cost

$2,400 – $4,000

Installing a clay brick paver patio — typically about 200 sq ft, machine-made clay pavers in a simple pattern on a compacted gravel base with polymeric sand joints and solid edging — typically costs $2,400–$4,000, with most homeowners paying around $3,200, about $12–$20 per sq ft installed.

White board-and-batten house facade against a blue sky

Board and Batten Installation Cost

$7,500 – $21,300

Recladding a home in board and batten siding — typically a standard 2,000 sq ft home in vinyl or fiber cement, professionally installed — typically costs $7,500–$21,300, with most homeowners paying around $12,800, about $2.50–$12.50 per sq ft installed.