Home › Cost Guides › Heat Pump Installation
Cost Guide

How Much Does a Heat Pump Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$6,000 – $12,000
Most homeowners pay around $8,000 · Standard ducted air-source heat pump on existing ductwork — This Old House's 2026 survey of 1,000 homeowners averages $8,042 installed
typical
$6,000$12,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Outdoor heat pump unit mounted on a white exterior wall beneath a clear blue sky

Heat Pump Installation cost at a glance

  • Typical range: $6,000 – $12,000
  • Most homeowners pay: around $8,000
  • Prices vary most by: Equipment (outdoor unit + indoor air handler) (≈ 50–65% of the budget)

Cross-checked against four published sources for this project. Sources used for this page: the Angi heat pump and HVAC cost guides (2026), HomeGuide's heat pump cost guide, This Old House's 2026 heat pump cost survey of 1,000 homeowners and Modernize's 2026 electric heat pump pricing. Sources last checked: October 2026 — This Old House, HomeGuide, Modernize, Angi. How we calculate these costs

Cost by scope

Heat Pump Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Ductless mini-split (single zone)$3,000 – $8,000One outdoor unit, one indoor head — Angi averages about $6,500 installed; the per-zone price climbs fast with each added zone
Standard ducted air-source$6,000 – $12,000The most common whole-home setup — Modernize averages $9,000 installed and This Old House's survey averages $8,042
High-efficiency / cold-climate ducted$10,000 – $20,000Variable-speed compressors and cold-climate ratings working down to -13°F; premium builds can exceed $20,000
Geothermal$15,000 – $35,000+Ground loops instead of an air coil — Angi averages $15,322 across 297 verified projects; labor alone is 50–70% of the total

Where the money goes

Part of the jobShareNote
Equipment (outdoor unit + indoor air handler)≈ 50–65% of totalThe largest line — This Old House's equipment-only brand table runs $4,550–$9,550, and premium brands cost 20–40% more than value brands in HomeGuide. No source publishes a formal equipment/labor percentage split, so this share is derived from the guides' equipment and installed figures and is labelled as derived in the method box
Installation labor≈ 20–35% of totalAngi prices HVAC labor at $75–$150 an hour and HomeGuide at $80–$200+; a standard install takes 3–8 hours, complex jobs two or more days
Ductwork modifications≈ 5–15% of total$1,400–$5,600 in Angi where ducts need work; new ductwork runs $1–$13 a linear foot — on sound existing ductwork this line can be near zero
Electrical, pad, permits & start-up≈ 10–20% of totalPanel upgrade $1,800–$2,500 in HomeGuide where needed; concrete pad $300–$500; refrigerant line sets $15–$25 a foot; permits typically $100–$650
Equipment (outdoor unit + indoor air handler) · ≈ 50–65%Installation labor · ≈ 20–35%Ductwork modifications · ≈ 5–15%Electrical, pad, permits & start-up · ≈ 10–20%
Estimator’s note: on a heat pump installation, equipment (outdoor unit + indoor air handler) is usually where quotes swing most (≈ 50–65% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A ground-mounted outdoor unit on its stand — placement, the pad or stand, and the refrigerant line set to the indoor unit are all inside the installed price; HomeGuide prices concrete pads at $300–$500 and line sets at $15–$25 a foot.
A ground-mounted outdoor unit on its stand — placement, the pad or stand, and the refrigerant line set to the indoor unit are all inside the installed price; HomeGuide prices concrete pads at $300–$500 and line sets at $15–$25 a foot.

What moves the price most

System type is the budget. A single-zone mini-split ($3,000–$8,000), a standard ducted air-source system ($6,000–$12,000), a cold-climate high-efficiency build ($10,000–$20,000+) and geothermal ($15,000–$35,000+) are effectively four different projects wearing one name — know which one a quote describes. Efficiency tier is the second lever: Angi prices each SEER step at $350–$1,500 more, and This Old House's 2,000 sq ft example rises from $12,000 to over $20,000 going top-tier. Ductwork condition is the surprise line — sound existing ducts cost nearly nothing, while new or heavily modified ductwork runs into the thousands. Electrical capacity is the other hidden cost: a panel at capacity needs a $1,800–$2,500 upgrade in HomeGuide before the heat pump can be wired.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical heat pump installation budget breaks down

Take the typical job — a 3-ton ducted air-source heat pump swapped onto existing ductwork: outdoor unit and air handler, electrical tied in, new line set and pad, permits pulled, the system commissioned and the first-season settings walked through. Here is a realistic $8,000 version of that invoice, at This Old House's 2026 survey average: The budget below totals $8,000 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
Equipment — 3-ton outdoor unit + air handler$4,400
Installation labor (set, braze, wire, commission)$1,600
Electrical work, pad, line set & permits$1,200
Ductwork touch-up & smart thermostat$800
Total$8,000

What most people get wrong

  • Sizing the unit from square footage alone. This Old House prices a 3–5 ton system for a 2,000 sq ft home at $12,000 average — but tonnage without a Manual J load calculation is a guess, and an oversized unit short-cycles while an undersized one never catches up.
  • Comparing a per-zone ductless quote with a whole-home ducted quote. Angi prices ductless at $1,750–$4,500 a zone, so a 4-zone ductless build ($8,500–$14,000) is not the 'cheaper' option sitting next to one ducted number — the two were never the same job.
  • Discovering the electrical panel after the unit is ordered. HomeGuide prices a panel upgrade at $1,800–$2,500 — get an electrician's eyes on the panel before the equipment ships, because a full panel turns a one-day install into a two-trade project.
  • Treating the geothermal band as an air-source price. Angi's geothermal most-pay band ($4,541–$26,698) overlaps air-source numbers at its low end, but the averages live in different worlds — $15,322 against roughly $8,000. Make sure the quote names the system type.

Costs in your city

Heat pump pricing is a national equipment price wrapped in local labor: This Old House's homeowner survey shows 58% of replacers paying $150 or more an hour for installation labor, so the same 3-ton unit installs near the bottom of the band where trade rates are low and toward the top in a high-cost metro. Climate rewrites the specification — cold-climate markets pay for cold-climate-rated units working down to -13°F (HomeGuide) plus backup heat, while hot-humid markets spec the cooling side harder. Permits are the city's own line at roughly $100–$650 in Angi, and rebate programs vary by utility — HomeGuide notes rebates of $500–$2,000 where they exist. Ask each bidder for the load calculation, the efficiency tier in SEER2/HSPF2, and whether the panel, the ductwork and the permits are separate lines.

How we got these numbers

Cross-checked against the Angi heat pump and HVAC cost guides — read in full this run (ducted air-source $4,500–$8,000; ductless averaging about $6,500 inside $3,000–$8,000 at $1,750–$4,500 a zone; geothermal averaging $15,322 across 297 verified projects with most homeowners paying $4,541–$26,698; labor $75–$150 an hour; permits typically $100–$650; geothermal labor 50–70% of the project), HomeGuide's heat pump cost guide (air-source $10,000–$25,000+ installed — published as its band even though HomeGuide's own other HVAC pages print $3,800–$8,200 for the same equipment class; the page names both figures honestly; SEER2 efficiency tiers; panel upgrade $1,800–$2,500; permits $50–$300+), This Old House's 2026 heat pump cost survey of 1,000 homeowners — read in full this run (average $8,042 installed; 3–5 ton systems for a 2,000 sq ft home averaging $12,000; 58% of replacers paid $150+ an hour for labor; 10–15 year air-source lifespans) and Modernize's 2026 electric heat pump pricing (average $9,000 inside $6,500–$12,000 for ducted air-source). The $6,000–$12,000 typical band is the overlap of the three independent installed bands; the $8,000 most-pay figure is This Old House's survey average, sitting between Angi's verified-project band and Modernize's installer average. Equipment and labor percentage shares are derived from the guides' dollar figures and are labelled as derived on the page. Checked October 2026. Full method: How We Estimate Costs.

The fan and coil up close — single-speed compressors are the cheapest and least efficient; variable-speed units cost the most upfront and the least to run, with each SEER step up at $350–$1,500 more in Angi.
The fan and coil up close — single-speed compressors are the cheapest and least efficient; variable-speed units cost the most upfront and the least to run, with each SEER step up at $350–$1,500 more in Angi.

Frequently asked questions

How much does a heat pump cost installed?

$6,000–$12,000 is the typical installed band for a standard ducted air-source system, and This Old House's 2026 survey of 1,000 homeowners averages $8,042 installed. Modernize's independent installer data averages $9,000 inside the same band.

Is a ductless mini-split cheaper than a ducted heat pump?

For one zone, yes: Angi averages about $6,500 for a ductless install inside a $3,000–$8,000 band, against $6,000–$12,000 for a standard ducted system. Multi-zone ductless builds ($6,600–$16,500 for 3–5 zones in Angi) can pass a ducted system's price quickly.

How much does a geothermal heat pump cost?

Angi's 2026 data averages $15,322 across 297 verified projects, with most homeowners paying $4,541–$26,698; This Old House averages $17,000 for small-to-medium homes and $30,000+ for large ones. Labor is 50–70% of a geothermal project in Angi — the loop field, not the unit, is the cost.

What add-ons do heat pump quotes leave out?

Electrical panel upgrades ($1,800–$2,500 in HomeGuide), ductwork modifications ($1,400–$5,600 in Angi), line sets ($15–$25 a foot), the concrete pad ($300–$500) and permits (typically $100–$650) are the lines that appear after the unit price. Ask for each by name before comparing bids.

How long do heat pumps last?

Air-source units typically last 10–15 years (15–20 with diligent maintenance in HomeGuide); geothermal indoor units run 20–25 years and the ground loop 40–60 years. Annual professional maintenance runs $150–$300 in Angi.

What does efficiency cost, and is it worth it?

Angi prices each SEER step up at $350–$1,500 more, and single-speed compressors are the cheapest and least efficient while variable-speed units cost the most upfront and the least to run. This Old House's 2,000 sq ft example rises from $12,000 to over $20,000 going top-tier — size the efficiency to how long you will live with the bills.

Before you sign: get the load calculation in writing before the tonnage is chosen, confirm the efficiency tier and what ‘cold-climate’ means in your quotes, keep the panel, the ductwork and the permits as separate lines, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Heat Pump Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Drilling machine working beside houses on a residential street

Geothermal Heat Pump Installation Cost

$15,000 – $30,000

A geothermal heat pump installation typically costs $15,000 – $30,000 for a standard 3- to 4-ton home system, with about $15,300 the figure most jobs land near — Angi's 2026 data averages $15,322 across 297 verified projects inside its $4,541–$26,698 band, while HomeGuide puts the installed average at $20,000–$50,000+. The guides disagree because capacity and loop type dominate the price: a small home on a horizontal loop and a large home on drilled vertical bores are different jobs, and this page's typical band covers the standard home either way.

Outdoor air conditioner condenser units on a metal frame

Central AC Repair Cost

$350 – $1,800

A typical central AC repair — Fixr and Modernize both put most homeowners at about $750

Roofer in hard hat working on a shingle roof ridge under a blue sky

Attic Fan Installation Cost

$369 – $900

A typical attic fan install — Angi’s 2,806 verified projects (September 2026) average $625, with most homeowners paying $369–$914; Bob Vila’s $300–$900 typical band and Engineer Fix’s $300–$1,500 professional range overlap the same territory

Bare feet on a sunlit tiled bathroom floor beside a bathtub

Radiant Floor Heating Installation Cost

$1,653 – $6,656

A typical radiant floor heating project — Angi’s 2026 national range is $1,653–$6,656 averaging $4,128, and BlockRenovation’s average project lands at ~$4,000, agreeing within $128

Wall-mounted panel radiator in warm sunlight beside a carpeted floor

Baseboard Heater Installation Cost

$420 – $1,526

Baseboard heater installation typically costs $420 – $1,526 for a standard project, with about $973 the figure most jobs land near — Angi's national average is $973 inside its $420–$1,526 most-pay band. This guide prices electric and hydronic baseboard units installed by a pro, per unit and per project.

Clean wall-mounted indoor mini-split air conditioning unit

Mini-Split Installation Cost

$2,000 – $8,000

A professionally installed single-zone system — Angi ($2,000–$5,000 typical, ~$3,000 average), Modernize ($3,000–$8,000 installed) and USA Today ($2,000–$7,000 per zone) overlap at $2,000–$8,000; no single national average exists — the sources genuinely disagree ($3,000 vs $6,357 vs $8,500)