Home › Cost Guides › Front Door Replacement
Cost Guide

How Much Does a Front Door Replacement Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$500 – $2,500
Most homeowners pay around $1,400 · Typical cost for one standard single front door, pre-hung and installed — most homeowners pay about $1,400, with steel at the low end and wood, glass and sidelights pushing the price up
typical
$500$2,500
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Residential front porch with double entry doors and a brick walkway

Front Door Replacement cost at a glance

  • Typical range: $500 – $2,500
  • Most homeowners pay: around $1,400
  • Prices vary most by: The door unit — pre-hung, with frame (35–50% of the budget)

Cross-checked against four published sources for this project. Sources used for this page: Angi's exterior door installation cost guide, updated September 16, 2026 (national average $1,457, most pay $547–$2,375; entry door $150–$3,000 installed; labor $30–$90 per hour, 30–35% of total; removal $40–$200 plus about $60 disposal; new frame $130–$380; hardware $10–$200; sidelights/transom $1,600–$4,600 installed; materials steel $150–$1,400, fiberglass $150–$3,000, wood $500–$3,000), HomeGuide's front door replacement cost guide (single door $500–$2,500+ installed, most spend $1,400; door-only steel $200–$600, fiberglass $300–$2,000, solid wood $500–$2,500; basic labor $300–$500; removal $75–$200; sidelights +$500–$1,500+ per side; transom $200–$1,000+; double doors $1,500–$6,500+; custom $5,000–$20,000) and HomeGuide's door installation cost guide (installed steel $300–$2,700, fiberglass $400–$2,800, wood $580–$2,900; with sidelights $1,600–$4,600), Fixr's entry door installation cost guide, updated January 31, 2025 (average $1,353, range $975–$1,773; labor $67–$121 per hour, 3–7 hours, $200–$800) and the 2025 Cost vs. Value Report (steel entry door $2,435 job cost, $5,270 resale, 216% recouped; fiberglass grand entrance $11,754, 85% recouped — resale context only, not the typical band). Synthesized typical = the $500–$2,500 single-door overlap, with $1,400 most-pay at the median of the three published averages (Angi $1,457, HomeGuide $1,400, Fixr $1,353). Checked November 2026.. Sources last checked: October 2026 — HomeGuide, Fixr, Angi, Cost vs. Value. How we calculate these costs

Cost by scope

Front Door Replacement cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Basic steel door, same opening — the budget swap$500 – $1,000The cheapest like-for-like swap: a pre-hung steel single door in the existing opening, standard lockset, no glass. HomeGuide prices a basic steel door unit at $200–$600 and steel entry work installed at $300–$2,700, and Angi's entry-door table starts at $150 — the bottom of this tier is a plain steel door in a sound frame
Standard fiberglass pre-hung door — the typical job$1,000 – $1,800The typical band on this page: a pre-hung fiberglass single door, new frame, lockset, weatherstripping and trim. Fixr averages a single entry door at $1,353 (range $975–$1,773), HomeGuide says most homeowners spend $1,400, and its fiberglass entry band runs $400–$2,800 installed — fiberglass is the mid-range pick because it insulates well, resists dents and rot, and needs little upkeep
Wood door, or fiberglass with glass and sidelights$1,800 – $3,500Solid wood, or fiberglass with decorative glass and one sidelight: HomeGuide prices wood entry doors installed at $580–$2,900, doors with sidelights at $1,600–$4,600, and sidelights alone at $500–$1,500+ per side — glass and a widened opening are the spend at this tier
Double doors or a grand entrance with sidelights and transom$3,500 – $6,500+HomeGuide prices double front doors at $1,500–$6,500+ and custom front doors at $5,000–$20,000; the 2025 Cost vs. Value fiberglass grand entrance with sidelights costs $11,754 nationally. Two doors, glass on both sides and a rebuilt opening — price this tier only on a measured quote

Where the money goes

Part of the jobShareNote
The door unit — pre-hung, with frame35–50% of totalThe door itself is the largest line: HomeGuide prices single door units at $200–$600 for steel, $300–$2,000 for fiberglass and $500–$2,500 for solid wood before labor, and its installed bands run $300–$2,700 steel, $400–$2,800 fiberglass and $580–$2,900 wood — material choice moves this line more than anything else on the page
Installation labor25–35%Angi puts door installer labor at 30–35% of the total project at $30–$90 per hour; Fixr prices installers at $67–$121 per hour for 3–7 hours ($200–$800), and HomeGuide prices exterior install labor at $230–$800 — a straightforward swap takes 3–8 hours, reframing or a resized opening stretches it toward days
Frame, jamb, trim & weatherstripping10–20%The parts that make an entry door weather-tight rather than just hung: Angi prices a new exterior doorframe at $130–$380 and casing at $0.60–$1.20 per linear foot, HomeGuide prices jambs at $70–$200 and weatherstripping at $10–$40 — a rotted sill or frame found at removal is priced in this line
Hardware & locks5–10%Handle or lock set ($50–$300), deadbolt ($15–$45) and, where specified, a smart lock ($100–$500) in HomeGuide's hardware table; Angi puts hardware at $10–$200 with deadbolts and smart locks up to $300 — budget this line separately, because a smart lock alone can cost as much as the budget door's hardware twice over
Old door removal, disposal & permits5–10%Taking the old door out runs $75–$200 in HomeGuide ($40–$200 plus about $60 disposal in Angi), and Fixr prices a permit at a couple of hundred dollars where one is required — a like-for-like swap in the existing opening often needs no permit, while a new or widened opening usually does
The door unit — pre-hung, with frame · 35–50%Installation labor · 25–35%Frame, jamb, trim & weatherstripping · 10–20%Hardware & locks · 5–10%Old door removal, disposal & permits · 5–10%
Estimator’s note: on a front door replacement, the door unit — pre-hung, with frame is usually where quotes swing most (35–50% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Glass changes the price fast — a transom adds $200–$1,000+ and sidelights $500–$1,500+ per side in HomeGuide's data, before the wider framing they need
Glass changes the price fast — a transom adds $200–$1,000+ and sidelights $500–$1,500+ per side in HomeGuide's data, before the wider framing they need

What moves the price most

Material is the front door budget. HomeGuide's installed bands run steel $300–$2,700, fiberglass $400–$2,800 and wood $580–$2,900, and its door-only ladder runs steel $200–$600, fiberglass $300–$2,000 and solid wood $500–$2,500 — steel is the cheapest and most secure, fiberglass the best balance of insulation and upkeep, wood the dearest and the highest-maintenance. Pre-hung versus slab is the second lever: a pre-hung unit arrives hinged in its frame and installs in 3–8 hours, while a slab is cheaper to buy and dearer to hang because the hinges and lockset are cut on site — HomeGuide prices a slab swap as the slower job. Glass is the third: sidelights add $500–$1,500+ per side and a transom $200–$1,000+ in HomeGuide, and both widen the rough opening, so the framing grows with the glass. The opening itself decides the surprise line: a sound, square frame keeps the job a swap, while Angi prices a replacement frame at $130–$380 and HomeGuide prices reframing at $7–$20 per linear foot — rot found at removal is the common reason a one-day door job becomes two. Worked example at the most-pay figure: pre-hung fiberglass entry door, 36"×80" half-glass $650 + installation labor, 5 hours $400 + new frame, jamb and trim $150 + handle set and deadbolt $100 + old door removal and disposal $75 + weatherstripping, threshold and sealant $25 = $1,400. For the door behind a storm door see our storm door installation guide, for every exterior door type see our exterior door replacement guide, for the lock itself see our smart lock installation guide, and for the porch around it see our front porch installation guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
Hardware is a small line but a real one — a new handle set and deadbolt typically adds $50–$300 to the job in HomeGuide's pricing, smart locks $100–$500
Hardware is a small line but a real one — a new handle set and deadbolt typically adds $50–$300 to the job in HomeGuide's pricing, smart locks $100–$500

Frequently asked questions

How much does it cost to replace a front door?

About $500–$2,500 installed is the typical band on this page for a standard single front door, with most homeowners paying around $1,400. Fixr averages a single entry door at $1,353 (range $975–$1,773), Angi averages $1,457 across exterior door projects (most $547–$2,375), and HomeGuide says most homeowners spend $1,400 — double doors run $1,500–$6,500+.

How much does a front door cost by material?

Installed, HomeGuide prices steel entry doors at $300–$2,700, fiberglass at $400–$2,800 and wood at $580–$2,900. For the door unit alone, steel runs $200–$600, fiberglass $300–$2,000 and solid wood $500–$2,500 — steel is the budget pick and the most secure, fiberglass the usual recommendation for insulation and low upkeep, wood the premium look that needs refinishing.

How long does it take to replace a front door?

A basic single front door in the same opening takes 3–8 hours in HomeGuide (3–7 hours in Fixr) — set plumb, shimmed, sealed against weather, flashed and fitted with locks. Double doors, a full-frame replacement or added sidelights take longer, and painting adds about an hour per side plus a day of dry time between sides.

Can I replace a front door without replacing the frame?

Yes, if the frame is still in good condition and the new door is the exact same size as the old one in length, height, width and thickness — HomeGuide's condition for a frame-free swap. A warped, rotted or out-of-square frame needs repair ($75–$200+ in HomeGuide) or a new frame ($130–$380 in Angi), and a pre-hung unit in a new frame is then usually the cheaper sound opening.

Do I need a permit to replace a front door?

Often not for a like-for-like swap in the existing opening, but usually yes when the opening is widened, reframed or cut new — Angi notes many areas require a building permit for exterior door work, and Fixr prices a permit at a couple of hundred dollars where one is required. The installer normally pulls it; confirm it is in the quote rather than assumed.

Does a new front door pay for itself at resale?

A steel entry door is one of the highest-return projects measured: the 2025 Cost vs. Value Report prices its specified steel entry replacement at $2,435 nationally with an estimated $5,270 added resale value — 216% of cost recouped. The same report's fiberglass grand entrance with sidelights costs $11,754 and recoups 85% ($9,959), so the payback belongs to the standard steel door, not to the grand entrance.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Front Door Replacement cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Two-story suburban house with a spacious concrete driveway and greenery

Driveway Replacement Cost

$3,200 – $7,200

Typical 2-car driveway of about 600 sq ft, old surface torn out and replaced — about $4 – $15 per sq ft all-in, including removal

Exposed wooden beams in a house under construction, showing the structural timber framing

House Leveling Cost

$3,000 – $9,500

Leveling a pier-and-beam house typically costs $3,000 – $9,500, with about $6,500 the most-pay figure — Modernize and EngineerFix agree on that band and average, and the work is hydraulic jacks, reshimming and pier, beam or joist repair under the floor, not a new foundation; a settled slab is priced by underpinning instead, and a full lift with foundation replacement runs far past this page.

An abandoned empty inground pool in an Arizona backyard, its floor covered in dirt and debris, with overgrown plants and a clear blue sky

Pool Removal Cost

$5,000 – $8,000

Removing an inground swimming pool — a partial fill-in or a full demolition and haul-away, with fill dirt, permits and regrading, at about $13.50 per square foot

Yellow excavator digging in open soil at a construction site

Septic Tank Replacement Cost

$3,000 – $7,000

Replacing just the septic tank — a new 1,000-gallon concrete tank set in the existing hole while the drain field stays in service — typically costs $3,000–$7,000, with most homeowners landing at $6,000 for the common 1,000-gallon concrete job.

Orange excavator tearing down a brick house, rooms exposed

House Demolition Cost

$6,000 – $25,000

Tearing down a whole single-family house — permits, utility cut-and-cap, excavator demolition, debris hauling and site grading — typically costs $6,000–$25,000, averaging $15,800 for a 2,000-square-foot home in Angi's 2026 data.

Wood-frame structure going up on a building site

Detached Garage Construction Cost

$25,000 – $33,600

Building a standard 2-car detached garage — about 400–480 sq ft, stick-built on a concrete slab with asphalt shingles, vinyl siding and two standard doors — typically costs $25,000–$33,600, with most homeowners paying around $26,400, about $50–$70 per sq ft. The wider published spread is $18,000–$57,600.