Home › Cost Guides › Foundation Installation
Cost Guide

How Much Does a Foundation Installation Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$4,000 – $15,000
Most homeowners pay around $9,250 · A new foundation for a 1,000-square-foot footprint — excavation, footings, concrete and reinforcement together, with the type (slab, pier and beam, or basement) setting the price
typical
$4,000$15,000
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Concrete and block foundation walls under construction, with vertical rebar capped in red, workers and scaffolding under a blue sky

Foundation Installation cost at a glance

  • Typical range: $4,000 – $15,000
  • Most homeowners pay: around $9,250
  • Prices vary most by: Concrete & reinforcement (40–60% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: Angi's foundation cost guide, updated September 15, 2026 (national average $9,244 from 880 verified projects, most $4,012–$14,742; $5–$37 per square foot; 1,000 sq ft $5,000–$37,000; monolithic slab $5–$16 per square foot; pier and beam $6–$12, average $8,000–$15,000; basement $20–$37 per square foot, basement foundation $24,000–$148,000; labor 40–60% of total; pouring $4,500–$18,500; grading and excavation $2–$10 per square foot; footings about $6.50 per square foot; soil test $1,000–$5,000; new-build home foundation average about $11,000), HomeGuide's foundation cost guide (2026) ($6–$50 per square foot by type; concrete slab $6–$14 per square foot, 2,000 sq ft $12,000–$28,000; stem wall $6–$18; mat or raft $6–$12; crawl space $15–$18; basement $35–$50+, $70,000–$100,000+ for 2,000 sq ft; labor $3–$7 per square foot, about 50%; materials $3–$7 per square foot; poured concrete walls $10,000–$37,500 or $10–$25 per square foot of floor area; ICF walls $10–$25 per square foot of wall surface) and Concrete Network's concrete price data, updated January 7, 2026 (plain slab installed $6.50–$10.50 per square foot; ready-mix concrete $160–$195+ per cubic yard). HomeLight's NAHB-based figure corroborates the basement-heavy end (average cost to install a foundation $44,748 across full new-home foundations, often with basements — cited as context, not averaged into the slab-led band). Synthesized typical = Angi's most-pay band for a 1,000-square-foot foundation, rounded to $4,000–$15,000, with $9,250 most-pay at Angi's $9,244 average rounded. Checked November 2026.. Sources last checked: October 2026 — HomeGuide, HomeLight, Angi. How we calculate these costs

Cost by scope

Foundation Installation cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Budget — monolithic slab, 1,000 sq ft$5,000 – $10,000Angi prices a monolithic slab at $5–$16 per square foot and HomeGuide at $6–$14, so a basic 1,000-square-foot slab lands at the low end of both bands.
Standard — 1,000 sq ft foundation, most types$4,000 – $15,000The typical project on this page: Angi's most-pay band is $4,012–$14,742 with a $9,244 average from 880 verified projects.
Premium — full basement foundation$20,000 – $50,000Angi prices a basement foundation at $20–$37 per square foot and HomeGuide at $35–$50+, which is $20,000–$50,000 for 1,000 square feet before finishing.

Where the money goes

Part of the jobShareNote
Concrete & reinforcement40–60% of totalHomeGuide prices concrete materials at $3–$7 per square foot of a $6–$14 slab total, and Concrete Network prices ready-mix at $160–$195+ per cubic yard
Labor (excavation, forming & pour)40–60% of totalAngi prices labor at 40–60% of a foundation project, and HomeGuide at about 50% — $3–$7 per square foot for the pour alone
Grading & excavation10–25% of totalAngi prices grading and excavation at $2–$10 per square foot, before the concrete is even ordered
Soil test, engineering & permits5–15% of totalAngi prices a geotechnical soil test at $1,000–$5,000; permits and inspection are on top of that
Concrete & reinforcement · 40–60%Labor (excavation, forming & pour) · 40–60%Grading & excavation · 10–25%Soil test, engineering & permits · 5–15%
Estimator’s note: on a foundation installation, concrete & reinforcement is usually where quotes swing most (40–60% of total of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
A mixer truck pouring into a foundation: the pour is 40–60% labor in Angi's data, and HomeGuide prices the concrete itself at $3–$7 per square foot
A mixer truck pouring into a foundation: the pour is 40–60% labor in Angi's data, and HomeGuide prices the concrete itself at $3–$7 per square foot

What moves the price most

Type is the first lever: Angi prices a monolithic slab at $5–$16 per square foot, pier and beam at $6–$12, and a basement at $20–$37 — the basement costs four times the slab for the same footprint, and buys a whole extra floor. Size is second: Angi prices 1,000 square feet at $5,000–$37,000 depending on type, while HomeGuide prices a 2,000-square-foot slab at $12,000–$28,000 against $70,000–$100,000+ for a basement of the same size. Soil and site are third: Angi prices grading and excavation at $2–$10 per square foot and a soil test at $1,000–$5,000, and poor soil, rock or a high water table can push a slab job toward basement pricing. Labor is fourth: Angi prices labor at 40–60% of the total, and a foundation is one job where the labor share rises with difficulty — a tight lot, a slope or a deep excavation all add hours before they add concrete. Worked example at the most-pay figure: concrete & rebar $3,750 + labor $3,500 + excavation & grading $1,250 + soil test & permits $750 = $9,250. For the ground around the new foundation, see our basement waterproofing guide and our crawl space encapsulation guide, and for what happens when the ground moves after the pour see our foundation repair guide.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Costs in your city

Labor is the biggest variable in any remodel, and labor is local — the same bathroom can price very differently in Houston than in Boston. We are adding city editions metro by metro, each with its own labor index, permit notes and climate factors, written for that city rather than copied from this page. Wave 1: Houston, Dallas–Fort Worth, Phoenix, Atlanta, Miami–South Florida, Orlando, Tampa, Charlotte, Austin and San Antonio. Until your city's page is live, use the national range here and weight it the way contractors do: Sun Belt labor often prices near or below the national middle, while coastal California and the Northeast metros often price well above it.

How this estimate was built: the range on this page is a synthesis of at least three published industry sources (national cost guides and the Remodeling Magazine Cost vs. Value data among them), cross-checked in October 2026. We publish planning ranges, never a single pretend-precise price. Full method: How We Estimate Costs.
A worker balancing on a rebar grid before the pour: reinforcement is what turns concrete into a foundation — Angi prices footings at about $6.50 per square foot
A worker balancing on a rebar grid before the pour: reinforcement is what turns concrete into a foundation — Angi prices footings at about $6.50 per square foot

Frequently asked questions

How much does it cost to build a foundation?

Typically $4,000–$15,000 for a 1,000-square-foot foundation, with $9,250 the published average — Angi's national average is $9,244 from 880 verified projects.

How much is a foundation per square foot?

$5–$37 per square foot in Angi's data and $6–$50 in HomeGuide's — the type decides where you land: a slab is $5–$16, pier and beam $6–$12, and a basement $20–$37.

How much is a concrete slab foundation?

$6–$14 per square foot in HomeGuide's data, or $12,000–$28,000 for a 2,000-square-foot home; Concrete Network prices a plain slab installed at $6.50–$10.50 per square foot.

How much is a basement foundation?

$20–$37 per square foot in Angi's data and $35–$50+ in HomeGuide's — $70,000–$100,000+ for a 2,000-square-foot home before any finishing.

What makes a foundation cost more?

Soil and site prep: Angi prices grading and excavation at $2–$10 per square foot and a soil test at $1,000–$5,000, and poor soil or a high water table can push a slab job toward basement pricing. See our foundation repair guide for what happens when the ground moves after the pour.

Before you sign: get at least 3 written local quotes for the same written scope, confirm permits and who pulls them, and keep a 10–20% contingency separate from the contract price.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Foundation Installation cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

White colonial house with a wraparound porch and two white sectional garage doors beside a concrete driveway

Garage Door Repair Cost

$155 – $380

The typical project is one failed part on a standard sectional door — a spring, a cable, rollers or a sensor — diagnosed and replaced in a single visit. Replacing the whole door is priced on the garage door replacement page, and fitting a new opener on the garage door opener installation page.

Raised wooden deck with railings and stairs overlooking an autumn backyard

Deck Repair Cost

$750 – $2,500

The typical project is a professional repair of a sound-framed deck — a run of damaged boards replaced, a railing section made safe, a post or a flight of stairs fixed — not a rebuild. Resurfacing every board or replacing the whole deck is tiered separately below; a brand-new deck is priced on the deck building page, and cleaning and staining alone on the deck staining page.

Backyard wooden fence with weathered and newer sections beside a shed

Fence Repair Cost

$300 – $950

The typical project is one damaged section made good — a post replaced or reset, a panel or a run of boards renewed, or a gate rehung — on a fence that is otherwise sound. A whole new fence is priced on the fence installation page.

Stucco house with tiled roofs at several heights and a brick driveway

Gutter Cleaning Cost

$100 – $250

The typical project is one full professional clean of a standard home — debris cleared from about 150–200 linear feet of gutter, downspouts flushed and flow checked. New gutters are priced on the gutter installation page and guards on the gutter guard installation page; neither is blended into this cleaning band.

Worker in a yellow raincoat pressure washing grey house siding from behind

Pressure Washing Cost

$200 – $400

The typical project is a professional wash of a standard home’s siding — soft-washed where the material needs it — on a one- or two-story house. A single driveway or patio, a roof soft wash and a whole-property bundle are tiered separately below; gutter cleaning by hand is priced on the gutter cleaning page.

Weathered wooden picket fences enclosing a suburban backyard on three sides

Fence Staining Cost

$750 – $2,100

The typical project is a professional stain of a standard 6-foot wood privacy fence, about 150 linear feet, washed and prepped first — about $0.50 – $2.50 per sq ft of fence surface in HomeGuide. A short picket run, painting instead of staining and both-sides shadow-box work are tiered separately below; a new fence is priced on the fence installation page.