Home › Cost Guides › Pressure Washing
Cost Guide

How Much Does Pressure Washing Cost? (2026)

By Ahsan ul Haq · Last updated: 11 November 2026 · Planning estimate — not a quote · How we estimate

Typical range
$200 – $400
Most homeowners pay around $300 · The typical project is a professional wash of a standard home’s siding — soft-washed where the material needs it — on a one- or two-story house. A single driveway or patio, a roof soft wash and a whole-property bundle are tiered separately below; gutter cleaning by hand is priced on the gutter cleaning page.
typical
$200$400
Low end = minor scope  ·  marker = typical middle  ·  high end = major scope. Add 10–20% contingency to any budget.
Worker in a yellow raincoat pressure washing grey house siding from behind

Pressure Washing cost at a glance

  • Typical range: $200 – $400
  • Most homeowners pay: around $300
  • Prices vary most by: Washing labor (65–80% of the budget)

Cross-checked against three published sources for this project. Sources used for this page: the Angi pressure washing cost guide, HomeGuide's pressure washing cost guide and Thumbtack's pressure washing cost data. Sources last checked: October 2026 — HomeGuide, Angi, Thumbtack. How we calculate these costs

Cost by scope

Pressure Washing cost ranges by scope — chart of the table below
ScopeTypical costWhat it includes
Single surface — driveway, patio or walkway$100 – $260HomeGuide prices a driveway at $100–$260 and Angi at $100–$250, and a patio or deck runs $100–$200 in Angi and $200–$240 in HomeGuide. One surface, one visit — and small jobs carry the minimum charge, which is why one walkway never prices by the foot alone.
Whole-house wash — the typical job$200 – $400The typical project on this page. Angi averages $312 across 51,092 verified projects with most homeowners paying $213–$449; HomeGuide prices a house or siding wash at $170–$360 with most homeowners spending about $265; Thumbtack puts pressure washing a house at $241–$418.
Two-story, roof soft wash or whole-property package$400 – $1,000+Angi prices two-story houses at $400–$1,400 and roof washing at $450–$700, and Thumbtack prices two-story homes at $279–$472 and roofs at $419–$686. Height, soft-wash chemistry and bundled driveway, deck and fence surfaces are what is being bought in this tier.

Where the money goes

Part of the jobShareNote
Washing labor65–80%Almost the whole bill is the technician: HomeGuide prices pressure washing at $50–$200 an hour with most homeowners paying $130–$160, and a house and siding wash takes a professional about 2.3 hours in its data
Detergents & soft-wash solution5–12%Siding, stucco and roofs are soft-washed, not blasted — the solution does the work the pressure cannot. Angi prices stucco at $0.30–$0.50 per square foot against brick at $0.10–$0.40 for exactly that reason
Equipment, fuel & water8–15%Commercial machines, surface cleaners, extension wands and ladders. HomeGuide notes pros charge an average of $0.40 per square foot across job types once equipment and overhead are in the rate
Travel, setup & minimums5–10%The truck, setup and insurance cost the same for one walkway as for a whole house — which is why Angi’s per-square-foot rate falls as the area being cleaned grows
Washing labor · 65–80%Detergents & soft-wash solution · 5–12%Equipment, fuel & water · 8–15%Travel, setup & minimums · 5–10%
Estimator’s note: on pressure washing, washing labor is usually where quotes swing most (65–80% of a typical budget). Ask every contractor to itemize that line in writing — totals are only comparable when that part is.
Flatwork is the cheap end of the wash — HomeGuide prices a driveway or patio area at $100–$260 a visit, and bundling it with a house wash beats booking it alone.
Flatwork is the cheap end of the wash — HomeGuide prices a driveway or patio area at $100–$260 a visit, and bundling it with a house wash beats booking it alone.

What moves the price most

Height is the first price. Thumbtack prices one story at $218–$363, two stories at $279–$472 and three at $286–$509, and Angi’s story bands run wider still — ladders, lifts and a second pair of hands are bought by the hour. The rate unit hides a split: HomeGuide prices cold-water pressure washing at $0.08–$0.20 per square foot but hot-water power washing at $0.35–$0.77, while Angi’s all-in house band is $0.10–$0.50 — ask which machine the quote assumes. Material sets the method: Angi’s per-foot ladder runs brick $0.10–$0.40, vinyl $0.20–$0.50, stucco $0.30–$0.50 and wood $0.30–$0.55, because delicate surfaces are cleaned slowly with solution instead of force. Bundling is the discount: a driveway at $100–$250 in Angi added to a house visit costs less than the same driveway as its own appointment, because the setup is already paid. And the calendar matters — Angi’s guidance is a wash once a year, and spring demand is when prices and waits both peak.

Work out your quantities: before you compare quotes, run your measurements through our free remodeling calculators (paint, tile, concrete and flooring) — each one shows its formula and runs entirely in your browser.

Worked example: how a typical pressure washing budget breaks down

Take the typical job — a soft wash of an average one-story home's siding, with the driveway apron rinsed down on the same visit. Here is a realistic $300 version of that invoice, built from the rates the three datasets publish: The budget below totals $300 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.

Line itemExample budget
House wash labor — about 2.3 hours on site$210
Soft-wash detergent and pre-treatment$35
Equipment, fuel and setup$35
Final rinse, inspection and tidy-up$20
Total$300

What most people get wrong

  • Judging the quote by the hour. HomeGuide's $50–$200 hourly spread makes hours the wrong unit — a house wash is a fixed visit, and a per-job quote with the surfaces named in writing beats a cheap hourly rate with a slow clock.
  • Accepting full pressure on every surface. Siding, stucco and roofs should be soft-washed; a contractor who plans to blast vinyl at full pressure is quoting future damage, and Angi's material-priced ladder shows why the method is part of the price.
  • Booking surfaces one at a time. A driveway is $100–$260 as its own visit in HomeGuide mostly because the truck rolled — adding it to a house wash on the same day costs a fraction of a separate minimum-charge appointment.
  • Washing right before repainting without saying so. Painters wash too, and paying twice for the same prep is the most common double-spend in this category — if paint is planned, the wash belongs inside the painter's scope.
A Texas homeowner pricing an algae-green north wall gets one quote at $265 flat and another at $0.35 a square foot that lands near $630 for the same 1,800-square-foot house. Nothing is wrong with either bid — the second is quoting hot-water power washing, which HomeGuide prices at $0.35–$0.77 a foot, while the first is a cold-water soft wash. Local quotes diverge because the method word was missing, not because anyone is cheating: name the method and the surfaces, and the two bids converge.

How this estimate was built

Cross-checked against the Angi pressure washing cost guide (national average $312 across 51,092 verified projects, most homeowners paying $213–$449, $0.10–$0.50 per square foot and material and story bands), HomeGuide's pressure washing cost guide (house $170–$360 with most spending about $265, hourly and per-foot method pricing) and Thumbtack's pressure washing cost data (house $241–$418, one story $218–$363, two stories $279–$472). The typical band published here is the overlap of the three most-homes ranges; the most-pay figure sits inside every source's average cluster. Checked October 2026. Full method: How We Estimate Costs.

Steps, walkways and masonry are full-pressure work; siding and roofs are not — Angi prices stucco at $0.30–$0.50 per square foot precisely because it is soft-washed slowly instead.
Steps, walkways and masonry are full-pressure work; siding and roofs are not — Angi prices stucco at $0.30–$0.50 per square foot precisely because it is soft-washed slowly instead.

Frequently asked questions

How much does pressure washing a house cost on average?

Angi averages $312 across 51,092 verified projects, with most homeowners paying $213–$449. HomeGuide prices a house wash at $170–$360 with most spending about $265, and Thumbtack puts a house at $241–$418. The overlap — roughly $200–$400, most around $300 — is the band published on this page.

How much does pressure washing cost per square foot?

Angi prices $0.10–$0.50 per square foot depending on the surface. HomeGuide splits the methods: cold-water pressure washing at $0.08–$0.20 per square foot and hot-water power washing at $0.35–$0.77, with an average achieved rate near $0.40 across job types. Flat, easy surfaces sit at the bottom; siding and roofs at the top.

What is the difference between pressure washing, power washing and soft washing?

Pressure washing is cold water at high pressure; power washing adds heat, which is why HomeGuide prices it at $0.35–$0.77 per square foot against $0.08–$0.20 for cold water. Soft washing is the opposite direction — low pressure plus cleaning solution — and it is the correct method for roofs, stucco and painted or wood siding that high pressure would scar.

How often should a house be pressure washed?

Once a year is Angi’s guidance, ideally between March and November in most areas. Homes under trees or in humid shade grow algae faster and may want the siding done annually even if the concrete skips a year — green film on the north wall is the tell that the interval has stretched too far.

Can pressure washing damage siding?

Yes, at the wrong pressure or distance — water forced behind vinyl, etched wood and blown-out stucco are the classic DIY injuries, and Angi notes pros adjust technique by material for exactly this reason. A professional quote should name the method per surface: soft wash for siding and roof, full pressure only for sound concrete and masonry.

Before you sign: One story, soft wash, three datasets — the quote should already be written before the truck arrives.

Ahsan ul Haq — Editor, Remodel Cost Hub

Ahsan compiles and edits the cost guides on Remodel Cost Hub, cross-checking every range against at least three published sources before it is published — the full method is on our Methodology page. Spot an error on this page? Send a correction.

Pressure Washing cost range graphic
Save this range for later: Pin it on Pinterest

Related cost guides

Weathered wooden picket fences enclosing a suburban backyard on three sides

Fence Staining Cost

$750 – $2,100

The typical project is a professional stain of a standard 6-foot wood privacy fence, about 150 linear feet, washed and prepped first — about $0.50 – $2.50 per sq ft of fence surface in HomeGuide. A short picket run, painting instead of staining and both-sides shadow-box work are tiered separately below; a new fence is priced on the fence installation page.

Asphalt driveway leading to a detached garage under trees

Driveway Sealing Cost

$400 – $800

The typical project is professional sealcoating of a standard two-car asphalt driveway, about 400 sq ft — about $1 – $2 per sq ft installed in HomeGuide. Concrete sealing, two-coat work and crack-heavy driveways are tiered separately below; a new driveway is priced on the concrete driveway and driveway pages, not here.

Worker in helmet and visor cutting into a standing conifer trunk with a chainsaw

Tree Removal Cost

$385 – $1,070

The typical project is one mid-size yard tree — 30 to 60 ft — rigged down in sections by a two- or three-person crew and hauled away the same day, at about $10 – $14 per foot of height in LawnStarter. Small trees with a clear drop zone and oversize or crane-served trees are tiered separately below; stump grinding is priced as its own line, not folded into the takedown price.

A yellow bulldozer grading a dusty cleared lot with green trees behind it

Land Clearing Cost

$1,400 – $6,200

Land clearing typically costs $1,400 – $6,200 for a standard one-acre residential job, with about $3,800 the figure most jobs land near — Angi averages $3,778 across 2,416 verified projects with most homeowners paying $1,397–$6,173, HomeGuide prices clearing at $1,200–$8,000 per acre by vegetation density, and Fixr prices it at $500–$5,000 per acre. The $1,400–$6,200 typical band is Angi's most-pay band, and $3,800 is Angi's published average rounded — a lightly wooded acre costs far less, and a heavily wooded acre with full stump removal costs far more, while grading, soil testing and permits are priced separately and are not inside this band.

A yellow Volvo excavator loading soil into a blue dump truck on a dirt site under a clear blue sky

Yard Grading Cost

$1,000 – $3,000

Yard grading typically costs $1,000 – $3,000 for a standard residential regrade, with about $2,000 the figure most jobs land near — $0.40 – $2.00 per sq ft. Angi averages $2,176 across 5,354 verified projects with most homeowners paying $1,022–$3,330, Lawn Love puts the typical job at $770–$3,000 with a $1,700 average, Thumbtack puts most jobs at $1,040–$3,486 with about $1,897 most common, and HomeGuide averages $2,300 on a $500–$5,000 range. The $1,000–$3,000 typical band is the honest overlap of all four, and $2,000 is the midpoint of the four published national averages, not a published average itself — a small spot-level for a patio or pool costs far less, and a steep slope or a full acre costs far more, while land clearing, sod and drainage are priced separately and are not inside this band.

A large yellow CAT 320C excavator at a fenced residential excavation site, with houses behind it and a rubble pile beside the machine

Excavation Cost

$1,700 – $3,800

Excavation typically costs $1,700 – $3,800 for a standard residential job, with about $3,200 the figure most jobs land near — Angi averages $3,979 across 3,439 verified projects with most homeowners paying $1,659–$6,715, HomeGuide averages $3,500 on a $1,100–$5,600 range, and Thumbtack puts most jobs at $1,081–$3,799 with about $2,020 most common. The $1,700–$3,800 typical band is the honest overlap of all three, and $3,200 is the mean of the three published national averages, not a published average itself — a small driveway pad or trench costs far less, and a basement dig or rock ledge costs far more. Per cubic yard the guides disagree: HomeGuide prices digging at $2.50–$15.00, while Angi, Fixr, This Old House and CivilMath publish $50–$200 — both bands are printed with the scope difference named, because the guides do not price the same scope under the same label.