Deck Repair cost at a glance
- Typical range: $750 – $2,500
- Most homeowners pay: around $1,465
- Prices vary most by: Repair labor (45–60% of the budget)
Cross-checked against two published sources for this project. Sources used for this page: the Angi deck repair cost guide, HomeGuide's deck repair cost guide and the aggregated 2026 deck repair cost data published by GetASitePlan. Sources last checked: October 2026 — HomeGuide, Angi. How we calculate these costs
Cost by scope

| Scope | Typical cost | What it includes |
|---|---|---|
| Minor repairs — fasteners, a few boards, mold or stairs | $100 – $750 | The small end of the trade. HomeGuide prices fastener replacement at $50–$200, post replacement at $150–$500 per post and stair repairs at $150–$300 per stair; Angi prices mold and rot treatment at $200–$500, termite work at $200–$600 and loose-stair fixes at $25–$50 per stair. One problem, found early and fixed properly. |
| Board, railing and section repairs — the typical job | $750 – $2,500 | The typical project on this page. HomeGuide puts average deck repairs at $750–$2,500, the aggregated 2026 deck-repair cost data averages $1,465 with most jobs at $570–$2,600, and Angi's item prices put board replacement at $500–$4,000 and railing repairs at $500–$4,000 — a handful of boards or one railing run sits at the bottom of those bands. |
| Resurfacing or structural repair | $3,000 – $10,000+ | Where repair becomes a partial rebuild. Angi prices resurfacing at $15–$50 per square foot and full deck replacement at around $8,000, HomeGuide prices replacement at $30–$55 per square foot, and Angi's verified-project figures average $2,247 across all deck repairs with most homeowners paying $890–$3,664 — the top of that band is this tier's floor. |
Where the money goes
| Part of the job | Share | Note |
|---|---|---|
| Repair labor | 45–60% | Angi prices deck contractors at $50–$100 an hour, and most of a repair bill is the carpenter: lifting boards without breaking their neighbours, sistering a joist and re-fixing a railing to code are slow, skilled work |
| Boards & repair materials | 25–40% | Material sets this line: Angi prices repair materials at $3–$45 per square foot, from cedar at $3–$7 to composite at $12–$45, and HomeGuide prices board replacement at $25–$125 per square foot installed by material |
| Railing, stair & hardware parts | 8–15% | Angi prices railing replacement at $35–$210 per linear foot by material and stair anchoring at $15–$40 per step — the safety hardware is a small share of most bills and the entire point of some |
| Permits, inspection & disposal | 3–8% | Angi prices deck permits at $225–$500 where structural work triggers one, and demolition and disposal at $5–$15 per square foot on tear-out scopes; minor repairs usually need neither |

What moves the price most
What is rotten underneath decides the bill. The boards you can see are the cheap part — HomeGuide prices a replacement board at $175–$875 fitted and a post at $150–$500, but the same visit that finds a soft joist or a rotted ledger turns a board job into structural work. Material reprices everything: Angi's repair-material ladder runs from cedar at $3–$7 per square foot through pressure-treated at $8–$20 to composite at $12–$45, so matching an existing composite deck costs several times what matching treated lumber does. Labor is $50–$100 an hour in Angi, and access — a high deck, a tight yard, stairs to rebuild — is bought by the hour. Size still scales it: Angi's size table runs from $300–$4,500 for a 10×10 deck to $1,200–$18,000 for a 20×20, because repair is priced over the damaged area, not the visit. And there is a replace line — HomeGuide treats a deck past about 15 years with major damage as a replacement conversation, and Angi puts full replacement around $8,000 against a $2,247 average repair.
Worked example: how a typical deck repair budget breaks down
A typical board-and-railing repair on a sound-framed treated-lumber deck, priced line by line from the bands on this page. The budget below totals $1,465 — the "most homeowners pay around" figure from the top of this page — split using this page's own cost breakdown. It shows how a real quote at that level is usually composed; every line is built from the ranges on this page, and it is an illustration, not a quote for your project.
| Line item | Example budget |
|---|---|
| Replacement boards — pressure-treated, about 8 boards | $585 |
| Repair labor — lifting, sistering & refixing | $585 |
| Railing parts & fastener hardware | $175 |
| Disposal & sundries | $120 |
| Total | $1,465 |
What most people get wrong
- Replacing boards over a rotten frame. New boards on soft joists fail again within a few seasons — the frame check comes first, and it is free to ask for.
- Matching composite with wood to save money. A patched material mix telegraphs itself and can void the decking warranty; match the board, or re-board the whole run.
- Skipping the wobbly railing. Angi prices railing repair at $500–$4,000, but a failed rail is the one deck defect that hurts people — it outranks every cosmetic fix.
- Treating resurfacing as repair. At $15–$50 per square foot in Angi, resurfacing a big deck can cost more than the deck is worth — run the repair-versus-replace numbers on this page first.
Costs in your city
Deck repair follows carpenter rates, and Angi's $50–$100-an-hour band is wide because labor markets are. Expect the top of it in coastal metros and wherever composite decks dominate the housing stock — a composite board match at $12–$45 per square foot in material alone moves the whole quote. Where decks are treated lumber and the winters freeze-thaw, the common bill is rot at the ledger and posts, and the quote to trust is the one that names the frame, not just the boards. Snow-load and hurricane regions also pull stair and railing work up to stricter code, which adds the $225–$500 permit layer in Angi to jobs that would be permit-free elsewhere.
How we got these numbers
Cross-checked against the Angi deck repair cost guide (average $2,247 across 20,403 verified projects; most homeowners paying $890–$3,664; materials $3–$45 per square foot; labor $50–$100 an hour), HomeGuide's deck repair cost guide ($750–$2,500 average; board replacement $25–$125 per square foot installed) and the aggregated 2026 deck repair cost data published by GetASitePlan (average $1,465; most jobs $570–$2,600). The typical band published here is the overlap all three support; the most-pay figure is the aggregated 2026 average. Checked October 2026. Full method: How We Estimate Costs.

Frequently asked questions
How much does deck repair cost on average?
HomeGuide puts average deck repairs at $750–$2,500 and the aggregated 2026 cost data averages $1,465 with most jobs at $570–$2,600. Angi's verified-project figures run higher — a $2,247 average with most homeowners paying $890–$3,664 — because its data includes the resurfacing and structural jobs tiered separately on this page.
How much does it cost to replace deck boards?
HomeGuide prices board replacement at $175–$875 per board and $25–$125 per square foot installed by material — wood at $25–$50, composite at $40–$80, PVC at $50–$80 and aluminum at $100–$125. Angi prices whole board-replacement projects at $500–$4,000, which is the same work counted by the job instead of the board.
How much does deck railing repair cost?
HomeGuide prices railing repair at $150–$5,000 depending on extent and material, and Angi at $500–$4,000, with railing replacement at $35–$210 per linear foot in Angi — wood at $40–$60, metal at $55–$85, composite at $80–$165 and cable at $115–$175. A wobbly railing is a safety repair, not a cosmetic one: it goes first on the list.
Should I repair or replace my deck?
Repair while the frame is sound and the damage is local. HomeGuide's guidance is that major damage on a deck of 15 years or more usually makes replacement the better spend, at $30–$55 per square foot, and Angi puts a full replacement at around $8,000 against typical repairs in the hundreds to low thousands. The inspection question is always the joists, posts and ledger — surface boards can look tired on a frame with decades left.
Does deck repair need a permit?
Usually not for like-for-like board and railing repairs, but structural work can trigger one: Angi prices deck permits at $225–$500 and notes minor repairs generally do not require one, with rules varying by state. Ask the contractor before work starts — a permit conversation after the joists are open is the expensive order to do it in.






